초음파 볼밀링 공정에 의한 용매 점도 특성에 따른 텅스텐계 합금 분쇄 거동
Investigation on Size Distribution of Tungsten-based Alloy Particles with Solvent Viscosity During Ultrasonic Ball Milling Process
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Tungsten heavy alloys (W–Ni–Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.
Abstract
Tungsten heavy alloys (W–Ni–Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.
참고문헌 (34)
- Y. B. Zhu, , Int. J. Refract. Met. Hard Mater, 25, pp.275~ (2007)
- H. ur Rehman, , Mater. Sci. Eng. A, 634, pp.202~ (2015)
- Y. Kim, , Int. J. Refract. Met. Hard Mater, 29, pp.112~ (2011)
- W. M. Tucho, , Scr. Mater, 63, pp.637~ (2010)
- A. Skumavc, , Int. J. Mater. Res, 104, pp.1143~ (2013)
- J. W. Yan, , Trans. Nonferrous Met. Soc. China, 19, pp.s711~ (2009)
- O. Dinçer, , Int. J. Refract. Met. Hard Mater, 50, pp.106~ (2015)
- D. P. Xiang, , Mater. Sci. Eng. A, 551, pp.95~ (2012)
- R. M. German, "Sintering theory and practice", Solar-Terrestrial Physics, pp.568~ (1996)
- S. Eroglu, , J. Mater. Process. Technol, 103, pp.288~ (2000)
- O. V. Tolochko, , Rev. Adv. Mater. Sci, 21, pp.192~ (2009)
- T. Ryu, , Int. J. Refract. Met. Hard Mater, 27, pp.701~ (2009)
- S. Zhang, , Powder Technol, 253, pp.464~ (2014)
- H. Lei, , Ultrason. Sonochem, 14, pp.81~ (2007)
- Y. Han, , Int. J. Refract. Met. Hard Mater, 34, pp.18~ (2012)
- D. G. Kim, , J. Alloys Compd, 354, pp.239~ (2003)
- A. Moitra, , J. Phys. D:Appl. Phys., 41, pp.185406~ (2008)
- M. Chakrabarti, , J. Mater. Sci, 43, pp.4175~ (2008)
- 정성수, "초음파 밀링한 WO3-CuO 나노혼합분말의 수소환원 거동", 대한금속·재료학회지, 47(9), pp.597~603 (2009), 대한금속·재료학회
- H. Wang, , Energy Convers. Manage, 51, pp.846~ (2010)
- D. P. Xiang, , Mater. Sci. Eng. A, 578, pp.18~ (2013)
- 이승철, "초음파 밀링 공정을 이용한 텅스텐 중합금 나노복합분말의 제조", 한국분말재료학회지, 14(2), pp.101~107 (2007), 한국분말재료학회
- B. Clarke, "Influence of Viscosity on Grinding in Ballmills", pp.1966
- T. G. Myers, , Appl. Math. Modell, 30, pp.799~ (2006)
- L. A. Pérez-Maqueda, , Appl. Clay Sci, 28, pp.245~ (2005)
- J. D. Gates, , Wear, 265, pp.865~ (2008)
- S. Y. Wang, , Adv. Mater. Res, 924, pp.343~ (2014)
- V. D. Noto, , Electrochim. Acta, 55, pp.1431~ (2010)
- P. Patnaik, "Handbook of inorganic chemicals", pp.529~ (2003), McGraw-Hill
- Z. G. Dong, , Adv. Mater. Res, 565, pp.105~ (2012)
- E. D. Hollander, , Chemical Engineering Science, 56, pp.2531~ (2001)
- D. R. Lide, "Handbook of Chemistry and Physics", pp.85~ (2004), CRC press
- D. V. Pinjari, , Ultrason. Sonochem, 17, pp.845~ (2010)
- K. Okumura, , Adv. Colloid Interface Sci, 225, pp.64~ (2018)