중력모형을 이용한 서비스업의 지역간 교역계수 추정
Estimating Interregional Trade Coefficient of Service Industry using the Gravity Model
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
본 연구의 목적은 중력모형을 이용하여 서비스업에 대한 지역간 교역계수를 추정하는 것이다. 중력모형을 이용하여지역간 교역규모를 추정할 때 가장 중요한 점은 바로 종속변수인 지역간 교역자료와 독립변수인 지역간 인력요인 및 지역간 거리를 나타내는데 적용되는 대리변수의 선정이라고 할 수 있다. 따라서 본 연구에서는 중력모형을 이용하여 서비스업의 지역간 교역규모를 추정할 때 적용 가능한 다양한 대리변수에 따라 네 가지 유형의 모형을 제시하고 이중에서 통계적설명력이 가장 높은 모형을 선정하고자 하였다. 분석결과, 종속변수로 지역산업연관표의 16개 지역간 서비스업 교역량 자료를 적용하고 독립변수로 이출지역의 서비스업 생산액 자료와 이입지역의 인구규모 그리고 지역간 공간거리를 적용한 모형의 설명력이 가장 높은 것으로 나타났다. 따라서 본 연구는 광역자치단체보다 작은 경제단위의 지역을 대상으로 지역산업연관표를 작성하거나 또는 최신의 지역산업연관표를 작성하기 위해 비조사적 방법을 적용하는데 있어 보다 정확한 지역간 교역자료 구축을 위한 방법을 제시하였다는데 의의가 있다고 할 수 있겠다.
Abstract
The study aims to estimate interregional trade coefficient of service industry using the gravity model. The gravity model has been widely used for prediction of the level of human interaction between two regions which is positively related to attraction of them and negatively related to the distance between them. To apply the gravity model for explaining the interregional trade flow of service industry, the choice of proper proxy variables which represent a dependent variable and independent variables is most important. However, the literature shows that there are few studies on this issue. Four models concerned to the choice of proxy variables are considered. Finally, this paper employs the least-squares regression analysis to test the model’s goodness-of-fit,and suggests the most appropriate model based on the result from the analysis. The result shows that the interregional trade of service industry in regional input-output table developed by The Bank of Korea is desirable as a dependent variable, the service industry output of export region,the population of import region, and the spatial distance between regions are desirable as independent variables.
참고문헌 (21)
- 김재형, "공공투자사업의지역경제파급효과추정을 위한 다지역산업연관모형(MRIO) 구축 및 분석" (2000), 한국개발연구원
- 김홍배, "도시및지역경제분석론" (2007), 기문당
- 김홍배, "지역경제와 지역환경(Ⅱ)", 국토계 획, 32(5), pp.231~245 (1997)
- 박상우, "지역간 투입산출분석 모형개발연구(Ⅰ)" (2001), 국토연구원
- 박상우, "지역간 투입산출분석 모형개발연구(Ⅱ)" (2002), 국토연구원
- 박상우, "지역간 투입산출분석 모형개발연구(Ⅲ)" (2003), 국토연구원
- 박상우, "2003년 지역간 산업 연관표 구축" (2007), 국토연구원
- 박지영, "산업별 시 · 도간 경제교역량 추정", 지역연구, 24(2), pp.27~57 (2008), 한국지역학회
- 이춘근, "대구 경북 지역 간 산업 연관 모형의 개발과 분석" (2001), 대구경북개발연구원
- 정기호, "투입계수 추정을 위한 RAS방법의확장", 계량경제학회, 10(2), pp.17~47 (1999)
- 지해명, "지역간 교역의 추정: 지역경제 성장에 관한 추론", 경제학연구, 57(4), pp.135~163 (2009), 한국경제학회
- 하현욱, "2차 자료의 사용이 RAS기법의 신뢰도에 미치는 영향", 국토연구, 49, pp.25~38 (2006), 국토연구원
- 한국은행, "2005년 지역 산업 연관표" (2009)
- 홍순영, "지방자치와 지역 특화 산업" (1995), 삼성경제연구소
- Batten, D. F., "The Interregional Linkages between National and Regional Input-Output Models", International Regional Science Review, 7(1) (1982)
- 박창귀, "대전ㆍ충남지역 산업 간 연관관계의 구조적 변화", 국토연구, 51(4), pp.91~108 (2006), 국토연구원
- Harris, R. I. D., "Input-output Modeling if the Urban and Regional Economy: the Importance of External Trade", Regional Studies, 32(9), pp.851~862 (1998)
- Hitomi, Kazumi, "The Role of Interregional Trade in Generating Change in the Regional Economies of Japan, 1980~1990", Economic Systems Research, 12(4), pp.515~537 (2000)
- Miller, R. E., "Input-Output Analysis: Foundation and Extentions" (1985), Prentice-Hall
