강재의 저온 특성을 고려한 선체 보강판과 빙하의 충격 상호 작용에 대한 수치 해석
Numerical Analysis of Iceberg Impact Interaction with Ship Stiffened Plates Considering Low-temperature Characteristics of Steel
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
It is essential to design crashworthy marine structures for operations in Arctic regions, especially ice-covered waters, where the structures must have sufficient capacity to resist iceberg impact. In this study, a numerical analysis of a colliding accident between an iceberg and stiffened plates was carried out employing the commercial finite element code ABAQUS/Explicit. The ice material model developed by Liu et al. (2011) was implemented in the simulations, and its availability was verified by performing some numerical simulations. The influence of the ambient temperature on the structural resistance was evaluated while the local stress, plastic strain, and strain energy density in the structure members were addressed. The present study revealed the risk of fracture in terms of steel embrittlement induced by ambient temperature. As a result, the need to consider the possibility of brittle failure in a plate-stiffener junction during operations in Arctic regions is acknowledged. Further experimental work to understand the structural behavior in a plate-stiffener junction and HAZ is required.
Abstract
It is essential to design crashworthy marine structures for operations in Arctic regions, especially ice-covered waters, where the structures must have sufficient capacity to resist iceberg impact. In this study, a numerical analysis of a colliding accident between an iceberg and stiffened plates was carried out employing the commercial finite element code ABAQUS/Explicit. The ice material model developed by Liu et al. (2011) was implemented in the simulations, and its availability was verified by performing some numerical simulations. The influence of the ambient temperature on the structural resistance was evaluated while the local stress, plastic strain, and strain energy density in the structure members were addressed. The present study revealed the risk of fracture in terms of steel embrittlement induced by ambient temperature. As a result, the need to consider the possibility of brittle failure in a plate-stiffener junction during operations in Arctic regions is acknowledged. Further experimental work to understand the structural behavior in a plate-stiffener junction and HAZ is required.
참고문헌 (34)
- Derradji-Aouat, A, "A Unified Failure Envelope for Isotropic Fresh Water Ice and Iceberg Ice", ~ (2000)
- DNV, "Ice Collision Scenario", ~ (2006)
- Ehlers, S., "Increased Crashworthiness due to Arctic Conditions-The Influence of Sub-Zero Temperature", Marine Structures, 28, pp.86~100 (2012)
- Finnish and Swedish Ice Class Rules 2008, "FSICR", ~ (2008)
- Gagnon, R. E., "A Numerical Model of Ice Crushing Using a Foam Analogue", Cold Regions Science and Technology, 65(3), pp.335~350 (2011)[DOI]
- Gagnon, R. E., "Triaxial Experiments on Iceberg and Glacier Ice", Journal of Glaciology, 41(139), pp.528~540 (1995)[DOI]
- Gao, Y., "An Elastic-Plastic Ice Material Model for Ship-Iceberg Collision Simulations", Ocean Engineering, 102, pp.27~39 (2015)[DOI]
- Hakala, M. K., "A Nonlinear Finite Element Analysis of an Ice-Strengthened Ship Shell Structure", Computers & Structures, 12(4), pp.541~547 (1980)[DOI]
- IACS, U.R, "Requirements Concerning Polar Class", ~ (2011)
- Jebaraj, C., "Finite Element Analysis of Ship", Ice Interaction, 1992, pp.43(2), 205~221
- Zhibin Jia, "Numerical Analysis of Nonlinear Dynamic Structural Behaviour of Ice-loaded Side-shell Structures", International Journal of STEEL STRUCTURES, 9(3), pp.219~230 (2009), 한국강구조학회
- Ship Collisions with Icebergs, "Kierkegaard, H.", Instituttet for Skibs-og Havteknik, Danmarks Tekniske Højskole, ~ (1993)
- Kim, E., "Experimental and Numerical Studies Related to the Coupled Behavior of Ice Mass and Steel Structures during Accidental Collisions", ~ (2014)
- Kõrgesaar, M., "Load Carrying Capacity of Ice-Strengthened Frames under Idealized Ice Load and Boundary Conditions", Marine Structures, 58, pp.18~30 (2018)[DOI]
- Liu, Z., "Analytical and Numerical Analysis of Iceberg Collisions with Ship Structures", ~ (2011)
- Liu, Z., "Plasticity Based Material Modelling of Ice and Its Application to Ship-Iceberg Impacts", Cold Regions Science and Technology, 65(3), pp.326~334 (2011)[DOI]
- Sadaoki Matsui, "Numerical study on the structural response of energy-saving device of ice-class vessel due to impact of ice block", International Journal of Naval Architecture and Ocean Engineering, 10(3), pp.367~375 (2018), 대한조선학회
- Melanson, P. M., "Microstructural Change in Ice : I. Constant-Deformation-Rate Tests under Triaxial Stress Conditions", Journal of Glaciology, 45(151), pp.417~422 (1999)[DOI]
- 민덕기, "충돌하중을 받는 빙해선박 단일 늑골 구조의 소성변형에 관한 연구", 대한조선학회 논문집, 49(3), pp.232~238 (2012), 대한조선학회[DOI]
- Nam, W., "Influence of Brittle Fracture on the Crashworthiness of Ship and Off-Shore Structures in Arctic Conditions", Proceedigs of 7th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2016) (2016)
- Nam, W., "Modelling of the Ductile-Brittle Fracture Transition in Steel Structures with Large Shell Elements: A Numerical Study", Marine Structures, 62, pp.40~59 (2018)[DOI]
- NORSOK Standard, "N-004-Design of Steel Structures, Rev. 2", Standards Norway, ~ (2004)
- Ortiz, M., "An Analysis of a New Class of Integration Algorithms for Elastoplastic Constitutive Relations", International Journal for Numerical Methods in Engineering, 23(3), pp.353~366 (1986)[DOI]
- Palmer, A., "Arctic Offshore Engineering" (2013), World Scientific
- Park, D. K., "On the Crashworthiness of Steel-Plated Structures in an Arctic Environment : An Experimental and Numerical Study", Journal of Offshore Mechanics and Arctic Engineering, 137(5), pp.51501~ (2015)[DOI]
- Park, D. K., "Operability of Non-Ice Class Aged Ships in the Arctic Ocean-Part II : Accidental Limit State Approach", Ocean Engineering, 102, pp.206~215 (2015)[DOI]
- Park, D. K., "Collision Tests on Steel-Plated Structures in Low Temperature", ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering, American Society of Mechanical Engineers, pp.V003T02A01~V003T02A01 (2015)
- Petrovic, J. J., "Review Mechanical Properties of Ice and Snow", Journal of Material Science, 38(1), pp.1~6 (2003)
- Ritch, R., "Local Ice Pressures Measured on a Strain Gauge Panel during the CCGS Terry Fox Bergy Bit Impact Study", Cold Regions Science and Technology, 52(1), pp.29~49 (2008)[DOI]
- Ritchie, R. O., "On the Relationship between Critical Tensile Stress and Fracture Toughness in Mild Steel", Journal of the Mechanics and Physics of Solids, 21(6), pp.395~410 (1973)[DOI]
- Sammonds, P. R., "Fracture of Multi-Year Sea Ice under Triaxial Stresses : Apparatus Description and Preliminary Results", Journal of Offshore Mechanics and Arctic Engineering, 111(3), pp.258~263 (1989)[DOI]
- Tvergaard, V., "Analysis of the Cup-Cone Fracture in a Round Tensile Bar", Acta Metallurgica, 32(1), pp.157~159 (1984)[DOI]
- Yu, T., "Simulation of Ship-Ice Collision Using a Constitutive Model of Ice Material Considering the Effect of Temperature", Proceedings of the 28th International Ocean and Polar Engineering Conference (2018)
- Zhu, Ling, "Dynamic Analysis of Ship Plates Under Repeated Ice Floes Impacts Based on a Simplified Ship-Ice Collision Model", Proceedings of the 28th International Ocean and Polar Engineering Conferencem (2018)