집중질량 라인모델을 이용한 Steel Lazy Wave Riser의 비선형 동적 해석
Nonlinear Dynamic Analysis of Steel Lazy Wave Riser using Lumped Mass Line Model
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the numerical code for the 3D nonlinear dynamic analysis of an SLWR (Steel Lazy Wave Riser) was developed using the lumped mass line model in a FORTRAN environment. Because the lumped mass line model is an explicit method, there is no matrix operation. Thus, the numerical algorithm is simple and fast. In the lumped mass line model, the equations of motion for the riser were derived by applying the various forces acting on each node of the line. The applied forces at the node of the riser consisted of the tension, shear force due to the bending moment, gravitational force, buoyancy force, riser/ground contact force, and hydrodynamic force based on the Morison equation. Time integration was carried out using a Runge–Kutta fourth-order method, which is known to be stable and accurate. To validate the accuracy of the developed numerical code, simulations using the commercial software OrcaFlex were carried out simultaneously and compared with the results of the developed numerical code. To understand the nonlinear dynamic characteristics of an SLWR, dynamic simulations of SLWRs excited at the hang-off point and of SLWRs in regular waves were carried out. From the results of these dynamic simulations, the displacements at the maximum bending moments at important points of the design, like the hang-off point, sagging point, hogging points, and touch-down point, were observed and analyzed.
Abstract
In this study, the numerical code for the 3D nonlinear dynamic analysis of an SLWR (Steel Lazy Wave Riser) was developed using the lumped mass line model in a FORTRAN environment. Because the lumped mass line model is an explicit method, there is no matrix operation. Thus, the numerical algorithm is simple and fast. In the lumped mass line model, the equations of motion for the riser were derived by applying the various forces acting on each node of the line. The applied forces at the node of the riser consisted of the tension, shear force due to the bending moment, gravitational force, buoyancy force, riser/ground contact force, and hydrodynamic force based on the Morison equation. Time integration was carried out using a Runge–Kutta fourth-order method, which is known to be stable and accurate. To validate the accuracy of the developed numerical code, simulations using the commercial software OrcaFlex were carried out simultaneously and compared with the results of the developed numerical code. To understand the nonlinear dynamic characteristics of an SLWR, dynamic simulations of SLWRs excited at the hang-off point and of SLWRs in regular waves were carried out. From the results of these dynamic simulations, the displacements at the maximum bending moments at important points of the design, like the hang-off point, sagging point, hogging points, and touch-down point, were observed and analyzed.
참고문헌 (17)
- Hall, M., "Validation of a Lumped-Mass Mooring Line Model with DeeoCwind Semisubmersible Model Test Data", Ocean Engineering, 104, pp.590~603 (2015)[DOI]
- Hong, N., "Dynamic Analysis of Riser with Vortex Excitation by Coupled Wake Oscillator Model", Journal of Korean Society of Coastal and Ocean Engineers, 12(3), pp.109~115 (2000)
- Kim, B. W., "Finite Element Nonlinear Analysis for Catenary Structure Considering Elastic Deformation", Computer Modeling in Engineering and Sciences, 63(1), pp.29~45 (2010)[DOI]
- Kim, B. W., "Comparison of Linear Spring and Nonlinear FEM Methods in Dynamic Coupled Analysis of Floating Structure and Mooring System", Journal of Fluids and Structures, 42, pp.205~227 (2013)[DOI]
- Kim, S. J., "Fatigue Damage of Lazy-Wave SCR for Deepwater Offshore Platforms", Journal of the Institute of Industrial Technology, 27(1), pp.27~34 (2016), Daejeon University
- Dynamic Response of Deepwater Lazy-Wave Catenary Riser, "Li, S. C.", Deep Offshore Technology International, Amsterdam Netherlands, ~ (2010)
- 오승훈, "동적이완법을 이용한 Steel Lazy Wave Riser의 정적형상 추정에 관한 수치해석적 연구", 한국해양공학회지, 32(6), pp.466~473 (2018), 한국해양공학회[DOI]
- Oh, S. H., "Dynamic Simulation of Steel Lazy Wave Riser Excited at the Top-End", International Offshore and Polar Engineering Conference, pp.1816~1823 (2019)
- Park, B. W., "Introduction on BOD (Basis of Design) for Concept Design of Steel Lazy Wave Riser", Proceedings of the Autum Conference the Korean Society of Ocean Engineers (2017)
- Park, B. W., "A Study on the Initial Configuration of SLWR (Steel Lazy Wave Riser) Considering the Effect of Internal Fluid Density and Buoyancy Arrangement", Proceedings of the Joint Conference of the Korean Association of Ocean Science and Technology Societies (KAOSTS) (2018)
- Park, B. W., "Dynamic Analysis of SLWR Subjected to Internal Slug Flow Conditions", International Offshore and Polar Engineering Conference, pp.1861~1867 (2019)
- Ruan, W., "Nonlinear Dynamic Analysis of Deepwater Steel Lazy Wave Riser Subjected to Imposed Top-End Excitations", Proceedings of 35th International Conference on Ocean, Offshore and Arctic Engineering (2016)
- van den Boom, H. J. J., "Dynamic Aspects of Offshore Riser and Mooring Concepts", Offshore Technology Conference, pp.405~416 (1987)
- Wang, J., "Static Equilibrium Configuration of Deepwater Steel Lazy-Wave Riser", Proceedings of 23th International Offshore and Polar Engineering Conference, pp.995~998 (2013)
- Wang, J., "A Nonlinear Model for Deepwater Steel Lazy-Wave Riser Configuration with Ocean Current and Internal Flow", Ocean Engineering, 94, pp.155~162 (2015)[DOI]
- Wang, J., "A Nonlinear Dynamic Model for 2D Deepwater Steel Lazy-Wave Riser Subjected to Top–End Imposed Excitations", Ships and Offshore Structures, 13(3), pp.330~342 (2018)[DOI]
- 유광규, "Sensitivity Study on SCR Design for Spread-Moored FPSO in West Africa", 한국해양공학회지, 31(2), pp.111~120 (2017), 한국해양공학회