충돌하중을 받는 빙해선박 단일 늑골 구조의 소성변형에 관한 연구
On the Plastic Deformation of Polar-Class Ship's Single Frame Structures Subjected to Collision Loadings
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The effects of temperature on the structural behavior of polar class vessels have been experimentally and numerically investigated. Experiments were carried out on single frame structures made of steel material, DH36, which is used for outer shell of the vessels making transit through the polar region. A knife edge type striker was dropped down onto single frame structures. The temperatures of the single frames were set to -30°C, -50°C and room temperature. The deflection around the mid-point of the single frame was measured and numerically simulated using finite element model. Strain rate effect on the structural behavior has been investigated and turned out that the strain rate effect can be neglected. From the results of the experiment and numerical analyses, it has been noticed that the permanent deflection at lower temperature was reduced due to a temperature hardening of material as expected.
Abstract
The effects of temperature on the structural behavior of polar class vessels have been experimentally and numerically investigated. Experiments were carried out on single frame structures made of steel material, DH36, which is used for outer shell of the vessels making transit through the polar region. A knife edge type striker was dropped down onto single frame structures. The temperatures of the single frames were set to -30°C, -50°C and room temperature. The deflection around the mid-point of the single frame was measured and numerically simulated using finite element model. Strain rate effect on the structural behavior has been investigated and turned out that the strain rate effect can be neglected. From the results of the experiment and numerical analyses, it has been noticed that the permanent deflection at lower temperature was reduced due to a temperature hardening of material as expected.
참고문헌 (8)
- Choung, J. M., "On the Fracture Criteria of Steels for Marine Structures Subjected to Impact Loadings", 박사, pp.2007
- 정준모, "조선 해양 구조물용 강재의 소성 및 파단 특성 V: 온도 의존성을 고려한 변형률 속도에 관한 실험적 연구", 한국해양공학회지, 25(3), pp.73~84 (2011), 한국해양공학회
- Lee, J. W., "On the Optimization Design of Soft Bow Structure", Proc. of the second Internal Symposium on Practical Design of Ships and Mobile Units, pp.429~435 (1983)
- 임지호, "차체강판의 중변형률 속도에서의 동적 인장시험 및 물성 구성방정식에 관한 연구", 박사, pp.2005
- 민덕기, "빙해선박 강재의 저온 소성경화 구성방정식", 대한조선학회 논문집, 49(3), pp.227~231 (2012), 대한조선학회[DOI]
- 민덕기, "빙해선박용 강재의 저온특성에 관한 연구", 대한조선학회 논문집, 48(2), pp.171~177 (2011), 대한조선학회
- Nemat-Nasser, S., "Thermo -mechanical Response of DH-36 Structural Steel Over a Wide Range of Strain Rates and Temperature", Mech. Mat, 35, pp.1023~1047 (2003)
- Paik, J.K., "A basic study on static and dynamic crushing behavior of a stiffened tube", KSAE Transactions, 7(1), pp.219~238 (1999)