BGA 패키지의 기계적·전기적 특성 평가 및 평가법
Evaluation and Test Method Characterization for Mechanical and Electrical Properties in BGA Package
1
조회
0
다운로드
0
인용
0
참고문헌
초록
실험과 비선형 유한요소해석을 병행하여, area array 패키지에서 솔더 접합부 특성을 판별하기 위한 전단시험 결과에 미치는 전단속도와 높이의 영향을 연구하였다. 전단속도의 증가와 전단높이의 감소에 따라 전단강도는 증가하는 경향을 나타내었다. 과대하게 높은 전단높이는 비정상적으로 높은 표준편차 또는 솔더볼 표면으로부터 전단 프로브의 밀림 현상과 같은 실험오차를 발생시켰다. 반면, 낮은 전단 속도는 취약한 계면 파괴나 계면에서 가장 약한 층의 판별에 있어서 유용하였다. 한편, 리플로우 회수 증가에 따른 Sn-37Pb/Cu와 Sn-3.5Ag/Cu BGA 솔더 접합부의 기계적·전기적 특성에 대하여 연구하였다. Cu6Sn5와 Cu3Sn으로 구성된 금속간화합물 층의 총 두께는 리플오우 시간의 1/3승에 비례하여 증가하였다. 전단 강도는 3회 또는 4회 리플로우까지 증가한 후, 이후 리플로우 회수에 비례하여 감소하는 경향을 나타내었다. 이때, 파괴는 리플로우 회수에 관계없이 솔더 내에서 발생하였다. 전기 비저항은 리플로우 회수에 비례하여 증가하였다.
Abstract
The ball shear force was investigated in terms of test parameters, i.e. displacement rate and probe height, with an experimental and non-linear finite element analysis for evaluation of the solder joint integrity in area array packages. The increase in the displacement rate and the decrease in the probe height led to the increase in the shear force. Excessive probe height could cause some detrimental effects on the test results such as unexpected high standard deviation and probe sliding from the solder ball surface. The low shear height conditions were favorable for assessing the mechanical integrity of the solder joints. The mechanical and electrical properties of the Sn-37Pb/Cu and Sn-3.5Ag/Cu BGA solder joints were also investigated with the number of reflows. The total thickness of the intermetallic compound (IMC) layers, consisting of CuSn and CuSn, was increased as a function of cubic root of reflow time. The shear force was increased up to 3 or 4 reflows, and then was decreased with the number of reflows. The fracture occurred along the bulk solder, in irrespective of the number of reflows. The electrical resistivity was increased with increasing the number of reflows.
참고문헌 (16)
- "Electronic systems packaging: future reliability challenges", 38, pp.1277~ (1998)
- "Mechanical and Electrical Properties of Sn-3.5Ag Solder", Cu BGA Packages during Multiple Reflows, 2005, pp.297, 801~
- "Response surface models for efficient modular estimation of solder joint reliability in area array packages", 45, pp.623~ (2005)
- "Pb-free Sn", 3.5Ag electroplating bumping process and under bump metallization, 2003, pp.26, 245~
- "The influence of Sn-Cu-Ni and Sn-Au intermetallic compounds on the solder joint reliability of flip chips on low temperature co-fired ceramic substrates", 43, pp.1317~ (2003)
- "Reliability issues for flip-chip packages", 44, pp.719~ (2004)
- "Standardi-zation of the Important Test Parameters in the Solder Ball Shear Test for Evaluation of the Mechanical Joint Strength", 5, pp.15~ (2005)
- "Physics and materials challenges for lead-free solders", 93, pp.1335~ (2003)
- "Effect of substrate metallization on mechanical properties of Sn-3.5Ag BGA solder joints with multiple reflows"
- "Experimental and finite element analysis of the shear speed effects on the Sn-Ag and Sn-Ag-Cu BGA solder joints", A 371, pp.267~ (2004)
- "Characterization of the shear test method with low melting point In-48Sn solder joints", 397, pp.145~ (2005)
- "Reaction kinetics of solder-balls with pads in BGA packages during reflow soldering", 28, pp.1231~ (1999)
- "Ball shear versus ball pull test methods for evaluating interfacial failures in area array packages Electronics", 200 (2002)
- "Theory of Flow and Fracture of Solids" (1950), McGraw-Hill
- "Rapid formation of intermetallic compounds by interdiffusion in the Cu-Sn and Ni-Sn systems", 43, pp.329~ (1995)
- "The Principles of Engineering Materis" (1973), Prentice-Hall