리플로우 횟수가 ENIG/Sn-3.5Ag/ENIG BGA 솔더 조인트의 기계적, 전기적 특성에 미치는 영향
Effect of Multiple Reflows on Mechanical and Electrical Properties of NIG/Sn-3.5Ag/ENIG Ball Grid Array (BGA) Solder Joint
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
본 연구에서는 electroless nickel / immersion gold (ENIG) 처리된 printed circuit board (PCB)를 무연 솔더인 Sn-3.5(wt%)Ag로 접합하였다. 리플로우 횟수를 1회부터 10회까지 다양하게 하여 리플로우 횟수가 증가함에 따른 솔더 접합부의 기계적, 전기적 특성의 변화에 대해 연구하였다. 접합부의 미세 조직 관찰을 위해 접합부 단면을 폴리싱 하여 금속간 화합물의 두께를 측정하고 종류를 분석하였다. 접합부의 기계적 특성을 평가하기 위해서 die 전단 시험을 하였는데, 리플로우 횟수가 4-5회일 때까지 전단 강도 값이 증가하다가 5회 이후로 감소하였다. 전기적 특성을 알아보기 위해 전기 저항 값을 측정하였는데, 리플로우 횟수가 증가할수록 접합부의 전기 저항 값은 점점 증가하였다.
Abstract
In this study, solder joints were made with Sn-3.5Ag (wt%) solder ball. Electroless nickel / immersion gold (ENIG) printed circuit board (PCB) substrates were employed in this work. The mechanical and electrical properties were measured as a function of the number of reflow. Die shear strength was measured with increasing reflow number. Until the forth or fifth reflow, shear force increased and after the fifth reflow the shear force of die decreased. The electrical resistivity of solder joint linearly increased with increasing reflow number.
참고문헌 (13)
- M. McCormack, "Developing lead-free solders: a challenge and opportunity", JOM, 45, pp.36~ (1993)
- Carson Flynn, "Controlling Top Package Warpage for POP Applications", Electronic Components and Technology Conference, pp.737~ (2007)
- J. Muller, "Environmental Aspects of PCB Microintegration” ICP works", ICP works ’99 (1999)
- "European Union WEEE Directive, 3d Fraft", ~ (2000)
- "Japanese Ministry of Health and Welfare Waste Regulation", ~ (1998)
- A. Nadai, "Theory of Flow and Fracture of Solids 2", pp.535~ (1967), McGraw-Hill
- W. M. Chen, "Isothermal aging effects on the microstructure and solder bump shear strength of eutectic Sn37Pb and Sn3.5Ag solders", Microelectron. Reliab, 46, pp.896~ (2006)
- J. M. Koo, "Effect of substrate metallization on mechanical properties of Sn-3.5Ag BGA solder joints with multiple reflows", Microelectron. Eng, 37, pp.118~ (2005)
- J. M Koo, "Interfacial reaction and bump shear property of electroplated Sn-37Pb solder bump with Ni under bump metallization during multiple reflows", Adv. Mater.Research, 181, pp.15~ (2006)
- J. Baffett, "Electron systems packaging: future reliability challenges", Microelectron.Reliab, 38, pp.1277~ (1998)
- J. M. Koo, "Mechanical and electrical properties of Cu", Sn-3.5Ag, J.Electron. Mater, pp.2008, 37[DOI]
- R.E. Reed-Hill, "Physical Metalurgy Principles, 3rd ed", pp.156~ (1992), PWS Publishing Company
- Anonymous, "Fragility of Pb-free Solder Joint", Universal Instruments