컴포넌트에서의 비정상적인 금속간화합물 성장이보드 레벨 기계적 신뢰성에 미치는 영향
The Effect of Abnormal Intermetallic Compounds Growth at Component on Board Level Mechanical Reliability
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
컴포넌트에서의 비정상적인 금속간화합물 성장이 보드 레벨 기계적 신뢰성에 미치는 영향을 연 구하기 위하여, 전기 도금된 Ni/Au UBM과 Sn2.5Ag0.5Cu 솔더의 리플로우 횟수 및 고온 시효 시간에 따른 금속간 화합물 성장거동을 관찰하였다. 각 조건별로 처리된 컴포넌트에서 솔더 접합부의 기계적 특 성을 비교하기 위하여, 전단 속도 변화에 따른 볼 전단 시험을 실시하여 전단에너지 값을 측정하였다. 마 지막으로, 보드 레벨에서의 기계적 신뢰성 시험을 위하여 조건별로 처리된 컴포넌트를 PCB 보드에 실장 하여, 3점 굽힘 시험 및 충격 시험을 실시한 후 파괴모드를 분석하였다.
Abstract
In this paper, we studied how and why did abnormal IMC growth at component affect on board level mechanical reliability. First, interfacial reactions between Sn2.5Ag0.5Cu solder and electrolytic Ni/Au UBM of component side were investigated with reflow times and thermal aging time. Also, to compare mechanical reliability of component level, shear energy was evaluated using the ball shear test conducted with variation of shear tip speed. Finally, to evaluate mechanical reliability of board level, we surface-mounted component fabricated with each condition on PCB side. After conducting of 3 point bending test and impact test, we confirmed solder joint crack mode using cross-sectioning and dye & pry penetration method.
참고문헌 (9)
- M. Abtew, "Lead-free Solders in Microelectronics", Mater. Sci. Eng, 27, pp.95~ (2000)
- F. Song, "Investigation of IMC Thickness Effect on the Lead-free Solder Ball Attachment Strength: Comparison between Ball Shear Test and Cold Bump Pull Test Results", 56th ECTC, pp.1196~ (2006)
- "IPC", JEDEC-9702, “Monotonic Bend Characterization of Board-Level Interconnects”, 2004
- "JESD22-B104-B, “Mechanical Shock”", ~ (2001)
- M. E. Johnson, "Using High Speed Shear and Cold Ball Pull to Characterize Lead Free Solder Alloys and Predict Board Level Drop Test Performance", 57th ECTC, pp.536~ (2007)
- W. C. Luo, "Liquid", Solid and Solid, 4th EMAP, pp.2002[DOI]
- T. Laurila, "Interfacial reactions between lead-free solders and common base materials", Mater. Sci. Eng, R49, pp.1~ (2005)
- R. Erich, "Shear Testing and Failure Mode Analysis for Evaluation of BGA Ball Attachment", 24th IEEE, 1999, 16~
- J. H. Choi, "Comparison of Shear Strength and Shear Energy for 48Sn-52In Solder Bumps with Variation of Reflow Conditions", J. Microelectron. Packag. Soc, 12(4), pp.351~ (2005)