MEMS 패키징 및 접합 기술의 최근 기술 동향
Recent Trends of MEMS Packaging and Bonding Technology
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In these days, MEMS (micro-electro-mechanical system) devices become the crucial sensor components in mobile devices, automobiles and several electronic consumer products. For MEMS devices, the packaging determines the performance, reliability, long-term stability and the total cost of the MEMS devices. Therefore, the packaging technology becomes a key issue for successful commercialization of MEMS devices. As the IoT and wearable devices are emerged as a future technology, the importance of the MEMS sensor keeps increasing. However, MEMS devices should meet several requirements such as ultra-miniaturization, low-power, low-cost as well as high performances and reliability. To meet those requirements, several innovative technologies are under development such as integration of MEMS and IC chip, TSV(through-silicon-via) technology and CMOS compatible MEMS fabrication. It is clear that MEMS packaging will be key technology in future MEMS. In this paper, we reviewed the recent development trends of the MEMS packaging. In particular, we discussed and reviewed the recent technology trends of the MEMS bonding technology, such as low temperature bonding, eutectic bonding and thermo-compression bonding.
Abstract
In these days, MEMS (micro-electro-mechanical system) devices become the crucial sensor components in mobile devices, automobiles and several electronic consumer products. For MEMS devices, the packaging determines the performance, reliability, long-term stability and the total cost of the MEMS devices. Therefore, the packaging technology becomes a key issue for successful commercialization of MEMS devices. As the IoT and wearable devices are emerged as a future technology, the importance of the MEMS sensor keeps increasing. However, MEMS devices should meet several requirements such as ultra-miniaturization, low-power, low-cost as well as high performances and reliability. To meet those requirements, several innovative technologies are under development such as integration of MEMS and IC chip, TSV(through-silicon-via) technology and CMOS compatible MEMS fabrication. It is clear that MEMS packaging will be key technology in future MEMS. In this paper, we reviewed the recent development trends of the MEMS packaging. In particular, we discussed and reviewed the recent technology trends of the MEMS bonding technology, such as low temperature bonding, eutectic bonding and thermo-compression bonding.
참고문헌 (24)
- S. H. Choa, "Reliability of Vacuum Packaged MEMS Gyroscopes", Microelectronics Reliability, 45, pp.361~ (2005)
- 조영학, "3D 적층 IC를 위한 웨이퍼 레벨 본딩 기술", 마이크로전자 및 패키징학회지, 20(1), pp.7~13 (2013), 한국마이크로전자및패키징학회[DOI]
- M. Shimbo, "Silicon-to-silicon Direct Bonding Method", J. Appl. Phys, 60, pp.2987~ (1986)
- C. T. Ko, "Low Temperature Bonding Technology for 3D Integration", Microelectronics Reliability, 52, pp.302~ (2012)
- 이재학, "TSV 기반 3차원 반도체 패키지 ISB 본딩기술", 한국정밀공학회지, 31(10), pp.857~863 (2014), 한국정밀공학회
- V. Lehmann, "Bubble-free Wafer Bonding of GaAs and InP on Silicon in a Microcleanroom", Jpn. J. Appl. Phys. Part 2, 28(12), pp.2141~ (1989)
- Z. X. Xiong, "Low-temperature Wafer Bonding:a Study of Void Formation and Influence on Bonding Strength", J. Microelectromech. Syst, 14(2), pp.368~ (2005)
- Q. Y. Tong, "Low Vacuum Wafer Bonding", Electrochem. Solid-State Lett, 1(1), pp.52~ (1998)
- G. L. Sun, "Cool Plasma Activated Surface in Silicon Wafer Direct Bonding Technology", Le Journal de Physique Colloques, 49(C4), pp.79~ (1988)
- M. Reiche, "The Effect of Plasma Pretreatment on the Si", Si Bonding Behavior, 1997, 437~444
- C. S. Tan, "Low-temperature Thermal Oxide to Plasma-enhanced Chemical Vapor Deposition Oxide Wafer Bonding for Thin-film Transfer Application", Appl. Phys. Lett, 82, pp.2649~ (2003)
- W. George, "Field Assisted Glass-metal Sealing", J. Appl. Phys, 40(10), pp.3946~ (1969)
- R. Hayashi, "Development of New Anodically-bondable Material and Feed-through Substrate with High Bending Strength and Fracture Toughness", Proc. 28th IEEJ Sensor Symposium, Tokyo, 93 (2011)
- S. W. Choi, "The Analysis of Oxygen Plasma Pretreatment for Improving Anodic Bonding", J. Electrochem. Soc, 149(1), pp.G8~ (2002)
- Circuit Damage by Anodic Bonding, "S. Toshihito", IEEJ, 9~, pp.ST-92-7 (1992)
- K. Schjølberg-Henriksen, "Protection of MOS Capacitors During Anodic Bonding", J. Micromech. Microeng, 12, pp.361~ (2002)
- K. Schjølberg-Henriksen, "Sodium Contamination of SiO2 Caused by Anodic Bonding", J. Micromech. Microeng, 13, pp.845~ (2003)
- Qian Wang, "Au-Sn 공정 접합을 이용한 RF MEMS 소자의 Hermetic 웨이퍼 레벨 패키징", 마이크로전자 및 패키징학회지, 12(3), pp.197~206 (2005), 한국마이크로전자및패키징학회
- S. Sood, "Al-Ge Eutectic Wafer Bonding and Bond Characterization for CMOS Compatible Wafer Packaging", ECS Transactions, 33(4), pp.93~ (2010)
- C. H. Tsau, "Characterization of Wafer-Level Thermocompression Bonds", J. Microelectromech. Systems, 13(6), pp.963~ (2004)
- K. N. Chen, "Morphology and Bond Strength of Copper Wafer Bonding", Electrochem. Solid-State Lett, 7(1), pp.G14~ (2004)
- C. H. Yun, "Wafer Bonding with Metal Layers for MEMS Applications", ECS Transactions, 16(8), pp.117~ (2008)
- C. Cetintepe, "A Fabrication Process Based on Structural Layer Formation Using Au–Au Thermocompression Bonding for RF MEMS Capacitive Switches and Their Performance", International Journal of Microwave and Wireless Technologies, 6(5), pp.473~ (2014)
- C. S. Tan, "Low Temperature CuACu Thermo-compression Bonding with Temporary Passivation of Self-assembled Monolayer and Its Bond Strength Enhancement", Microelectronics Reliability, 52, pp.321~ (2012)