Deformation Analysis of Roll Mold for Nano-flexible Devices
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Nanoimprint lithography (NIL) has revolutionized the fabrications of electronics, photonics, optical and biological devices. Among all the NIL processes, roll-to-roll nanoimprinting is regarded best for having the attributes of low cost, continuous, simple, and energy-efficient process for nanoscale device fabrication. However, large-area printing is limited by the master mold deformation. In this study, a finite element model (FEM) has been constructed to assess the deformation of the roll mold adhesively wrapped on the carbon fiber reinforced material (CFRP) base roll. This study also optimizes the deformations in the metallic roll mold with respect to nip-forces applied in the printing process of nano-fabrication on large scale. The numerical simulations were also conducted to evaluate the deflection in roll mold assembly due to gravity. The results have shown decreasing trend of the deformation with decreasing nip-force. Also, pressure uniformity of about 40% has been optimized by using the current numerical model along with an acceptable deflection value in the vertical axis due to gravity.
Abstract
Nanoimprint lithography (NIL) has revolutionized the fabrications of electronics, photonics, optical and biological devices. Among all the NIL processes, roll-to-roll nanoimprinting is regarded best for having the attributes of low cost, continuous, simple, and energy-efficient process for nanoscale device fabrication. However, large-area printing is limited by the master mold deformation. In this study, a finite element model (FEM) has been constructed to assess the deformation of the roll mold adhesively wrapped on the carbon fiber reinforced material (CFRP) base roll. This study also optimizes the deformations in the metallic roll mold with respect to nip-forces applied in the printing process of nano-fabrication on large scale. The numerical simulations were also conducted to evaluate the deflection in roll mold assembly due to gravity. The results have shown decreasing trend of the deformation with decreasing nip-force. Also, pressure uniformity of about 40% has been optimized by using the current numerical model along with an acceptable deflection value in the vertical axis due to gravity.
참고문헌 (8)
- N. Kooy, "A Review of Roll-to-roll Nanoimprint Lithography", Nanoscale Research Letters, 9(1), pp.1~13 (2014)
- J. Y. Shao, "Nanoimprint Lithography for the Manufacturing of Flexible Electronics", Science China Technological Sciences, 62(2), pp.175~198 (2019)
- W. Huang, "A Review of the Scalable Nano-manufacturing Technology foR Flexible Devices", Frontiers of Mechanical Engineering, 12(1), pp.99~109 (2017)
- T. Lee, "Scalable and High-throughput Top-down Manufacturing of Optical Metasurfaces", Sensors, 20(15), pp.4108~ (2020)
- 조원경, "액적의 구름저항에 대한 정접촉각 및 거칠기의 영향", 마이크로전자 및 패키징학회지, 23(1), pp.23~28 (2016), 한국마이크로전자및패키징학회
- 강호주, "유연 기판을 이용한 PLC소자 제작을 위한 롤투롤 공정 연구", 마이크로전자 및 패키징학회지, 22(4), pp.25~29 (2015), 한국마이크로전자및패키징학회
- L. Liu, "Nanosphere Lithography for the Fabrication of Ultranarrow Graphene Nanoribbons and On-Chip Bandgap Tuning of Graphene", Advanced Materials, 23(10), pp.1246~1251 (2011)
- F. Mustapha, "Finite Element Validation on Adhesive Joint for Composite Fuselage Model", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 34, pp.69~74 (2012)