본문 바로가기
KERD
논문KCI 등재

Mechanical Modeling of Rollable OLED Display Apparatus Considering Spring Component

김택수|조우성|마부수|김완선
한국마이크로전자및패키징학회 (The Microelectronics And Packaging Society)|2020.06|마이크로전자 및 패키징학회지 (Jornal of the Microelectronics and Packaging Society)|제27권 제2호|pp. 19-26

0

조회

0

다운로드

3

인용

0

참고문헌

키워드

finite element analysisindium tin oxiderollable displayretracting forcesoft adhesive
주제분류재료공학

초록

Flexible displays have been evolved into curved, foldable, and rollable as the degree of bending increases. Due to the presence of brittle electrodes (e.g. indium-tin oxide (ITO)) that easily cracked and delaminated under severe bending deformation, lowering mechanical stress of the electrodes has been critical issue. Because of this, mechanical stress of brittle electrode in flexible displays has been analyzed mostly in terms of bending radius. On the other hand, in order to make rollable display, various mechanical components such as roller and spring are needed to roll-up or extend the screen for the rollable display apparatus. By these mechanical components, brittle electrode in the rollable display is subjected to the excessive tensile stress due to the retracting force as well as the bending stress by the roller. In this study, mechanical deformation of rollable OLED display was modeled considering boundary conditions of the apparatus. An analytical modeling based on the classical beam theory was introduced in order to investigate the mechanical behavior of the rollable display. In addition, finite element analysis (FEA) was used to analyze the effect of mechanical components in the apparatus on the brittle electrode. Furthermore, a strategy for improving the mechanical reliability of the rollable display was suggested through controlling the stiffness of adhesives in the display panel.

Abstract

Flexible displays have been evolved into curved, foldable, and rollable as the degree of bending increases. Due to the presence of brittle electrodes (e.g. indium-tin oxide (ITO)) that easily cracked and delaminated under severe bending deformation, lowering mechanical stress of the electrodes has been critical issue. Because of this, mechanical stress of brittle electrode in flexible displays has been analyzed mostly in terms of bending radius. On the other hand, in order to make rollable display, various mechanical components such as roller and spring are needed to roll-up or extend the screen for the rollable display apparatus. By these mechanical components, brittle electrode in the rollable display is subjected to the excessive tensile stress due to the retracting force as well as the bending stress by the roller. In this study, mechanical deformation of rollable OLED display was modeled considering boundary conditions of the apparatus. An analytical modeling based on the classical beam theory was introduced in order to investigate the mechanical behavior of the rollable display. In addition, finite element analysis (FEA) was used to analyze the effect of mechanical components in the apparatus on the brittle electrode. Furthermore, a strategy for improving the mechanical reliability of the rollable display was suggested through controlling the stiffness of adhesives in the display panel.

참고문헌 (27)

  1. P. C. P. Bouten, "Mechanics of ITO on Plastic Substrates for Flexible Displays", Flexible flat panel displays, 20(1), pp.99~ (2005)
  2. J. Lewis, "Material challenge for flexible organic devices", Mater. Today, 9(4), pp.38~ (2006)
  3. Y. Leterrier, "Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays", Thin Solid Films, 460(1-2), pp.156~ (2004)
  4. Z. Jia, "Failure mechanics of organic–inorganic multilayer permeation barriers in flexible electronics", Compos. Sci. Technol, 71(3), pp.365~ (2011)
  5. Y. C. Han, "Reliable thin-film encapsulation of flexible OLEDs and enhancing their bending characteristics through mechanical analysis", RCS Adv, 6(47), pp.40835~ (2016)
  6. C. -J. Chiang, "Mechanical modeling of flexible OLED devices", Org. Electron, 10(7), pp.1268~ (2009)
  7. C. -C. Lee, "Development of robust flexible OLED encapsulations using simulated estimations and experimental validations", J. Phys. D, 45(27), pp.275102~ (2012)
  8. C. -C. Lee, "Modeling and validation of mechanical stress in indium tin oxide layer integrated in highly flexible stacked thin films", Thin Solid Films, 544, pp.443~ (2013)
  9. Y. -F. Niu, "Improving the flexibility of AMOLED display through modulating thickness of layer stack structure", J. Soc. Inf. Display, 24(5), pp.293~ (2016)
  10. J. Lee, "Display Device", U.S. Patent, 9(877), 384, ~ (2018)
  11. Y. H. Jung, "Flexible display apparatus", U.S. Patent, 8(516), 728, ~ (2013)
  12. Z. Zhang, "Electronic devices with retractable displays", U.S. Patent, 9(625), 948, ~ (2017)
  13. C. J. Campbell, "Optically Clear Adhesives Enabling Foldable and Flexible OLED Displays", SID Symp. Dig. Tec, 48(1), pp.2009~ (2017)
  14. M. -K Yeh, "Bending stress analysis of flexible touch panel", Microsyst. Technol, 20(8-9), pp.1641~ (2014)
  15. C. -C. Lee, "Adhesion investigation of stacked coatings in organic light-emitting diode display", Architecture Surf. Coat. Technol, 303, pp.226~ (2016)
  16. F. Yun, "Characterizing mechanical behaviors of a flexible AMOLED during the debonding process", Microsyst. Technol, 22(10), pp.2397~ (2016)
  17. J. -Y. Sun, "Inorganic islands on a highly stretchable polyimide substrate", J. Mater. Res. Technol, 24(11), pp.3338~ (2009)
  18. H. Cheng, "An analytical model of strain isolation for stretchable and flexible electronics", Appl. Phys. Lett, 98(6), pp.061902~ (2011)
  19. Y. Shi, "Multiple neutral axes in bending of a multiple-layer beam with extremely different elastic properties", J. Appl. Mech, 81(11), pp.114501~ (2014)
  20. S. Li, "Shear deformation dominates in the soft adhesive layers of the laminated structure of flexible electronics", Int. J. Solids. Struct, 110, pp.305~ (2017)
  21. Y. Su, "Splitting of neutral mechanical plane of conformal, multilayer piezoelectric mechanical energy harvester", Appl. Phys. Lett, 107(4), pp.041905~ (2015)
  22. W. Kim, "Controlled multiple neutral planes by low elastic modulus adhesive for flexible organic photovoltaics", Nanotechnology, 28(19), pp.194002~ (2017)
  23. J. N. Reddy, "Mechanics of laminated composite plates and shells: theory and analysis" (2004), CRC press
  24. M. Nishimura, "A 5.5?inch full HD foldable AMOLED display based on neutral?plane splitting concept", J. Soc. Inf. Display, 27, pp.480~ (2019)
  25. J. T. Abrahamson, "Organic Light Emitting Diode Technology and Applications" (2019), IntechOpen
  26. 설재근, "유연 기판상 ITO 박막의 롤링변형에 따른 신뢰성 연구", 마이크로전자 및 패키징학회지, 25(1), pp.29~33 (2018), 한국마이크로전자및패키징학회
  27. 이미경, "고온 신뢰성 시험에서 발생된 플렉서블 OLED의 휨 변형", 마이크로전자 및 패키징학회지, 23(1), pp.17~22 (2016), 한국마이크로전자및패키징학회

관련 논문AI추천

유연 기판상 ITO 박막의 롤링변형에 따른 신뢰성 연구김병준, 김태욱, 설재근, 이동준한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2018 · 제25권 제1호유연 기판상 ITO 전극의 굽힘변형 및 굽힘피로에 따른 전기적 신뢰성 연구김병준, 설재근한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2017 · 제24권 제4호유연성 소자용 금속 전극의 신뢰성 연구 동향김병준한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2013 · 제20권 제4호플렉서블 디스플레이용 박막 소재 물성 평가김택수, 김형준, 마부수, 양찬희, 오승진한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2020 · 제27권 제3호유한요소해석을 통한 유연기판 위의 금속 박막의 최대 굽힘 변형률 예측김영천, 이종협한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2024 · 제31권 제1호비틀림 변형 중 ITO 필름의 시편 형태에 따른 기계적 전기적 파괴 연구권용욱, 김병준한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2017 · 제24권 제4호

이 간행물의 다른 논문 (7건)

이미지 센서의 최근 기술 동향과 향후 전망박상식, 우형수, 신범재pp. 1-10NO2 감응을 위한 Ag 금속입자가 기능화된 SnO2 나노선 기반 저온동작 센서이규형, 최명식, 김민영, 최승준, 안지혜pp. 11-17Enhancement in the Textural Properties and Hydrophobicity of Tetraethoxysilane-based Silica Aerogels by Phenyl Surface Modification정해누리, 이규연, 김태희, 박형호, 김용헌, Rushikesh P. Dhavale, Vinayak G. Parale, 최해령pp. 27-32산소발생용 Cobalt–phosphate (Co–pi) 촉매를 이용한 Gallium Nitride (GaN) 광전극의 광전기화학적 특성성채원, 하준석, 배효정, Vishal Vilas Burungalepp. 33-38차세대 웨어러블 디바이스를 위한 높은 기계적/전기적 특성을 갖는 CNT-Ni-Fabric 유연기판이민정, 하준석, 노호균, 차안나, 김형구pp. 39-44
원문 보기