산업현장 적용을 위한 스테인레스 스틸의 전해연마 특성
Electropolishing Characteristics of Stainless Steel for Industrial Application
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
For the industrial application of electropolishing process, we investigated electropolishing characteristics of stainless steel through increasing the specimen size or electrode gap. In this study, we performed a set of experiment with the specimen size of 10 cm × 10 cm and the electrode gap of 1 cm or more. In the view of the electropolishing process, the electrolyte temperature and the polishing time were most important factors compared with the current density and the electrode gap. Especially, the electrolyte temperature most importantly affected surface roughness and current efficiency on electropolishing characteristics. For the industrial application of electropolishing process, it should be considered for important factors such as electrolyte temperature, polishing time, current density and electrode gap, etc.
Abstract
For the industrial application of electropolishing process, we investigated electropolishing characteristics of stainless steel through increasing the specimen size or electrode gap. In this study, we performed a set of experiment with the specimen size of 10 cm × 10 cm and the electrode gap of 1 cm or more. In the view of the electropolishing process, the electrolyte temperature and the polishing time were most important factors compared with the current density and the electrode gap. Especially, the electrolyte temperature most importantly affected surface roughness and current efficiency on electropolishing characteristics. For the industrial application of electropolishing process, it should be considered for important factors such as electrolyte temperature, polishing time, current density and electrode gap, etc.
참고문헌 (9)
- D. Landolt, "Fundamental aspects of electropolishing", Electrochim. Acta, 32, pp.1~11 (1987)
- R. Rokicki, "Enhanced oxidation–dissolution theory of electropolishing", T. IMF, 90, pp.188~196 (2012)
- F. Nazneen, "Electropolishing of medical-grade stainless steel in preparation for surface nano-texturing", J. Solid State Electr, 16, pp.1389~1397 (2012)
- E. S. Lee, "Machining characteristics of the electropolishing of stainless steel(STS316L)", Int. J. Adv. Manuf. Tech, 16, pp.591~599 (2000)
- S. J. Lee, "The effects of electropolishing(EP)process parameters on corrosion resistance of 316L stainless steel", J. Mat. Process. Tech, 140, pp.206~210 (2003)
- J. K. Lee, "A study on mirror surface manufacturing process for solar cell", J. Kor. Acad. Industr. Coop. Soc, 4, pp.47~49 (2003)
- 박제민, "Co-Cr alloy의 전해연마에 따른 부식의 영향", 한국표면공학회지, 43(4), pp.199~204 (2010), 한국표면공학회
- J. B. Song, "A study on the machining characteristics of electropolishing for stainless steel", Kor. Soc. Mec. Eng, 23, pp.279~286 (1999)
- M. Paunovic, "Modern electroplating: Part A. Electrochemical aspects", pp.13~16 (2000), John Wiley & Sons