본문 바로가기
KERD
논문KCI 등재

유도결합 플라즈마 파워가 VN 코팅막의 미세구조, 결정구조 및 기계적 특성에 미치는 영향에 관한 연구

Effect of Inductively Coupled Plasma on the Microstructure, Structure and Mechanical Properties of VN Coatings

1

조회

0

다운로드

3

인용

0

참고문헌

키워드

주제분류기계공학

초록

The effects of ICP (Inductively Coupled Plasma) power, ranging from 0 to 200 W, on the crystal structure, microstructure, surface roughness and mechanical properties of magnetron sputtered VN coatings were systematically investigated with FE-SEM, AFM, XRD and nanoindentation. The results show that ICP power has a significant influence on coating microstructure and mechanical properties of VN coatings. With the increasing of ICP power, coating microstructure evolves from a porous columnar structure to a highly dense one. Average crystal grain size of single phase cubic fcc VN coatings was decreased from 10.1 nm to 4.0 nm with increase of ICP power. The maximum hardness of 28.2 GPa was obtained for the coatings deposited at ICP power of 200 W. The smoothest surface morphology with Ra roughness of 1.7 nm was obtained from the VN coating sputtered at ICP power of 200 W.

Abstract

The effects of ICP (Inductively Coupled Plasma) power, ranging from 0 to 200 W, on the crystal structure, microstructure, surface roughness and mechanical properties of magnetron sputtered VN coatings were systematically investigated with FE-SEM, AFM, XRD and nanoindentation. The results show that ICP power has a significant influence on coating microstructure and mechanical properties of VN coatings. With the increasing of ICP power, coating microstructure evolves from a porous columnar structure to a highly dense one. Average crystal grain size of single phase cubic fcc VN coatings was decreased from 10.1 nm to 4.0 nm with increase of ICP power. The maximum hardness of 28.2 GPa was obtained for the coatings deposited at ICP power of 200 W. The smoothest surface morphology with Ra roughness of 1.7 nm was obtained from the VN coating sputtered at ICP power of 200 W.

참고문헌 (20)

  1. 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 TiN 코팅막의 물성 비교연구", 한국표면공학회지, 44(5), pp.179~184 (2011), 한국표면공학회
  2. 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 제작된 CrN 코팅막의 물성 비교연구", 한국표면공학회지, 47(2), pp.86~92 (2014), 한국표면공학회[DOI]
  3. 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 TiAlN 코팅막의 물성 비교연구", 한국표면공학회지, 47(4), pp.168~173 (2014), 한국표면공학회[DOI]
  4. U. Wiklund, "Evaporated vanadium nitride as a friction material in dry sliding against stainless steel", Wear, 261, pp.2~8 (2006)
  5. A. Matthews, "Tribological coatings: contact mechanisms and selection", J. Phys. D. Appl. Phys, 40, pp.5463~5475 (2007)
  6. F. Rose, "Ultrathin TiSiN overcoat protection layer for magnetic media", J. Vac. Sci. Technol A, 29, pp.051502~ (2011)
  7. M. Hoseini, "Tribological investigation of coatings for artificial joints", Wear, 264, pp.958~966 (2008)
  8. 이석근, "Isolated Congenital Alveolar Synechiae: Review of Literature and Case Report -A Case Report-", Journal of Dental Anesthesia and Pain Medicine, 7(1), pp.22~26 (2007), 대한치과마취과학회
  9. S. Veprek, "Industrial applications of superhard nanocomposite coatings", Surf. Coat. Technol, 202, pp.5063~5073 (2008)
  10. U. Wiklund, "Experimental and theoretical studies on stainless steel transferonto a TiN-coated cutting tool", Acta Mater, 59, pp.68~74 (2011)
  11. W. -D. Münz, "Industrial scale manufactured superlattice hard PVD coatings", Surf. Eng, 17, pp.15~27 (2001)
  12. Fangfang Ge, "Achieving very low wear rates in binary transition-metal nitrides: The case of magnetron sputtered dense and highly oriented VN coatings", Surf. Coat. Technol, 248, pp.81~90 (2014)
  13. J. C. Caicedo, "Mechanical and electrochemical characterization of vanadium nitride (VN) thin films", E. Camps Appl. Surf. Sci, 258, pp.312~320 (2011)
  14. O. Storz, "Tribological properties of thermal-sprayed Magn´eli-type coatings with different stoichiometries (TinO2n-1)", Surf. Coat. Technol, 140, pp.76~81 (2001)
  15. 전성용, "유도결합 플라즈마 파워가 NbN 코팅막의 미세구조, 결정구조 및 기계적 특성에 미치는 영향에 관한 연구", 한국표면공학회지, 48(5), pp.205~210 (2015), 한국표면공학회[DOI]
  16. 전성용, "DC 스퍼터법과 유도결합 플라즈마 마그네트론 스퍼터법으로 증착된 수퍼하드 TiN 코팅막의 물성 비교연구", 한국표면공학회지, 46(2), pp.55~60 (2013), 한국표면공학회[DOI]
  17. G. Abadias, "Stress and preferred orientation in nitride-based PVD coatings", Surf. Coat. Technol, 202, pp.2223~2235 (2008)
  18. B. D. Cullity, "Elements of Xray Diffraction", pp.167~176 (2001), Prentice-Hall
  19. Ulf Helmersson, , Thin Sol. Films, 513, pp.1~24 (2006)
  20. A. A. Elmustafa, "Nanoindentation and the indentation size effect: Kinetics of deformation and strain gradient plasticity", J. Mech. Phys. Sol, 51, pp.357~381 (2003)

관련 논문AI추천

이 간행물의 다른 논문 (10건)