비대칭 바이폴라 펄스 스퍼터법으로 증착된 VN 코팅막의 미세구조, 결정구조 및 기계적 특성에 관한 연구
Microstructure, Crystal Structure and Mechanical Properties of VN Coatings Using Asymmetric Bipolar Pulsed dc Sputtering
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Nanocrystalline vanadium nitride (VN) coatings were deposited using asymmetric bipolar pulsed dc sputtering to further understand the influence of the pulsed plasmas on the crystal structure, microstructure and mechanical properties. Properties of VN coatings were investigated with FE-SEM, XRD and nanoindentation. The results show that, with the increasing pulse frequency and decreasing duty cycle, the coating morphology changed from a porous columnar to a dense structure, with finer grains. Asymmetric bipolar pulsed dc sputtered VN coatings showed higher hardness, elastic modulus and residual compressive stress than dc sputtered VN coatings. The results suggest that asymmetric bipolar pulsed dc sputtering technique is very beneficial for the reactive sputtering deposition of VN coatings.
Abstract
Nanocrystalline vanadium nitride (VN) coatings were deposited using asymmetric bipolar pulsed dc sputtering to further understand the influence of the pulsed plasmas on the crystal structure, microstructure and mechanical properties. Properties of VN coatings were investigated with FE-SEM, XRD and nanoindentation. The results show that, with the increasing pulse frequency and decreasing duty cycle, the coating morphology changed from a porous columnar to a dense structure, with finer grains. Asymmetric bipolar pulsed dc sputtered VN coatings showed higher hardness, elastic modulus and residual compressive stress than dc sputtered VN coatings. The results suggest that asymmetric bipolar pulsed dc sputtering technique is very beneficial for the reactive sputtering deposition of VN coatings.
참고문헌 (27)
- 전성용, "DC 스퍼터법과 유도결합 플라즈마 마그네트론 스퍼터법으로 증착된 수퍼하드 TiN 코팅막의 물성 비교연구", 한국표면공학회지, 46(2), pp.55~60 (2013), 한국표면공학회[DOI]
- M. Yang, "Epitaxial growth of high quality AlN films on Si substrates", Mater. Lett, 182, pp.277~280 (2016)
- M. T. Hosseinnejad, "Deposition of tungsten nitride thin films by plasma focus device at different axial and angular positions", App. Surf. Sci, 257, pp.7653~7658 (2011)
- R. Franz, "Vanadium containing selfadaptive low-friction hard coatings for hightemperature applications : A review", Surf. Coat. Tech, 228, pp.1~13 (2013)
- Y. Wang, "Mechanical strengthening in self-lubricating CrAlN", VN multilayer coatings for improved high-temperature tribological characteristics, 2016, pp.303, 12~17
- M. Fallqvist, "The influence of surface defects on the mechanical and tribological properties of VN-based arc-evaporated coatings", Wear, 297, pp.1111~1119 (2013)
- D. E. Macdonald, "Thermal and chemical modification of titanium–aluminum–vanadium implant materials: effects on surface properties, glycoprotein adsorption, and MG63 cell attachment", Biomaterials, 25, pp.3135~3146 (2004)
- G. Gassner, "A New Low Friction Concept for High Temperatures : Lubricious Oxide Formation on Sputtered VN Coatings", Tribol. Lett, 17, pp.751~756 (2004)
- Q. Sun, "Vanadium nitride as a novel thin film anode material for rechargeable lithium batteries", Electrochim. Acta, 54, pp.403~409 (2008)
- K. Yamamoto, "Properties of nano-multilayered hard coatings deposited by a new hybrid coating process: Combined cathodic arc and unbalanced magnetron sputtering", Surf. Coat. Tech, 200, pp.435~439 (2005)
- Hanizam, "The Effect of Pulse DC and DC Substrate Bias during in situ Cleaning PVD Process on Surface Roughness", Procedia Eng, 53, pp.562~568 (2013)
- J. Sellers, "Asymmetric bipolar pulsed DC : the enabling technology for reactive PVD", Surf. Coat. Tech, 98, pp.1245~1250 (1998)
- A. Anders, "Physics of arcing, and implications to sputter deposition", Thin Solid Films, 502, pp.22~28 (2006)
- 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 TiAlN 코팅막의 물성 비교연구", 한국표면공학회지, 47(4), pp.168~173 (2014), 한국표면공학회[DOI]
- 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 NbN 코팅막의 물성 비교연구", 한국표면공학회지, 48(4), pp.136~141 (2015), 한국표면공학회[DOI]
- 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 제작된 CrN 코팅막의 물성 비교연구", 한국표면공학회지, 47(2), pp.86~92 (2014), 한국표면공학회[DOI]
- F. Ge, "Achieving very low wear rates in binary transitionmetal nitrides: The case of magnetron sputtered dense and highly oriented VN coatings", Surf. Coat. Tech, 248, pp.81~90 (2014)
- Y. Qiu, "Influence of Nitrogen Partial Pressure and Substrate Bias on the Mechanical Properties of VN Coatings", Procedia Eng, 36, pp.217~225 (2012)
- T. Nakano, "Effect of the target bias voltage during off-pulse period on the impulse magnetron sputtering", Vacuum, 84, pp.1368~1371 (2010)
- M. Kumar, "Effect of Ar:N2ratio on structure and properties of Ni–TiN nanocomposite thin films processed by reactive RF", DC magnetron sputtering, 2013, pp.228, 100~114
- H. Du, "Effect of Ar", N2 flow ratio on oxidation resistance and properties of TiAl(La)N coatings, 2014, pp.46, 173~180
- C. P. Constable, "Raman microscopic studies of residual and applied stress in PVD hard ceramic coatings and correlation with X-ray diffraction (XRD)measurements", Surf. Coat. Tech, 184, pp.291~297 (2004)
- D. W. Hoffmann, "Stress and property control in sputtered metal films without substrate bias", Thin Solid Films, 107, pp.353~358 (1983)
- G. Abadias, "Stress and preferred orientation in nitride-based PVD coatings", Surf. Coat. Tech, 202, pp.2223~2235 (2008)
- J. M. Antunes, "Influence of Vickers tip imperfection on depth sensing indentation tests", Int. J. Solids Struct, 44, pp.2732~2747 (2007)
- A. A. Elmustafa, "Nanoindentation and the indentation size effect: Kinetics of deformation and strain gradient plasticity", J. Mech. Phys. Solids, 51, pp.357~381 (2003)
- M. Wang, "Size effect on mechanical behavior of Al", Si3N4multilayers by nanoindentation, 2015, pp.644, 275~283