직류 및 유도결합 플라즈마 마그네트론 스퍼터링법으로 제조된 HfN 코팅막의 미세구조 및 기계적 물성연구
Microstrcture and Mechanical Properties of HfN Films Deposited by dc and Inductively Coupled Plasma Assisted Magnetron Sputtering
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
For deposition technology using plasma, it plays an important role in improving film deposited with high ionization rate through high density plasma. Various deposition methods such as high-power impulse magnetron sputtering and ion-beam sputtering have been developed for physical vapor deposition technology and are still being studied. In this study, it is intended to control plasma using inductive coupled plasma (ICP) antennas and use properties to improve the properties of Hafnium nitride (HfN) films using ICP assisted magnetron sputtering (ICPMS). HfN film deposited using ICPMS showed a finer grain sizes, denser microstructure and better mechanical properties as ICP power increases. The best mechanical properties such as nanoindentation hardness of 47 GPa and Young's modulus of 401 GPa was obtained from HfN film deposited using ICPMS at ICP power of 200 W.
Abstract
For deposition technology using plasma, it plays an important role in improving film deposited with high ionization rate through high density plasma. Various deposition methods such as high-power impulse magnetron sputtering and ion-beam sputtering have been developed for physical vapor deposition technology and are still being studied. In this study, it is intended to control plasma using inductive coupled plasma (ICP) antennas and use properties to improve the properties of Hafnium nitride (HfN) films using ICP assisted magnetron sputtering (ICPMS). HfN film deposited using ICPMS showed a finer grain sizes, denser microstructure and better mechanical properties as ICP power increases. The best mechanical properties such as nanoindentation hardness of 47 GPa and Young's modulus of 401 GPa was obtained from HfN film deposited using ICPMS at ICP power of 200 W.
참고문헌 (14)
- 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 TiN 코팅막의 물성 비교연구", 한국표면공학회지, 44(5), pp.179~184 (2011), 한국표면공학회
- 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 제작된 CrN 코팅막의 물성 비교연구", 한국표면공학회지, 47(2), pp.86~92 (2014), 한국표면공학회[DOI]
- 전성용, "DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 TiAlN 코팅막의 물성 비교연구", 한국표면공학회지, 47(4), pp.168~173 (2014), 한국표면공학회[DOI]
- W. Lengauer, "Acta Materialia, The hafnium-nitrogen system: Phase equilibria and nitrogen diffusivities obtained from diffusion couples", Acta Materialia, 44(8), pp.3331~3338 (1996)
- Y. S. Fang, "Reactive sputtering for highly oriented HfN film growth on Si (100) substrate", Surf. Coat. Technol, 377, pp.1~6 (2019)
- T. Kanzawa, "Evaluation of hafnium nitride thin films sputtered from a hafnium nitride target", Vacuum, 83(3), pp.589~591 (2008)
- W. Tillmanna, "Structure and mechanical properties of hafnium nitride films deposited by direct current, mid-frequency, and high-power impulse magnetron sputtering", Thin Solid Films, 669, pp.65~71 (2019)
- J. Musil, "A Perspective of Magnetron Sputtering in Surface Engineering", J. Kor. Inst. Surf. Eng., 112(1-3), pp.162~169 (1999)
- 김태형, "A Review of Inductively Coupled Plasma-Assisted Magnetron Sputter System", Applied Science and Convergence Technology, 28(5), pp.131~138 (2019), 한국진공학회[DOI]
- K. Feng, "Effect of microstructure of TiN film on properties as bipolar plate coatings in polymer electrolyte membrane fuel cell prepared by inductively coupled plasma assisted magnetron sputtering", Thin Solid Films, 544, pp.224~229 (2013)
- 서대한, "유도결합 플라즈마를 이용한 마그네트론 스퍼터링으로 증착된 나노결정질 CrN 코팅막의 성장거동", 한국세라믹학회지, 49(6), pp.556~560 (2012), 한국세라믹학회[DOI]
- 전성용, "유도결합 플라즈마 파워가 VN 코팅막의 미세구조, 결정구조 및 기계적 특성에 미치는 영향에 관한 연구", 한국표면공학회지, 49(4), pp.376~381 (2016), 한국표면공학회[DOI]
- 전성용, "유도결합 플라즈마 파워가 NbN 코팅막의 미세구조, 결정구조 및 기계적 특성에 미치는 영향에 관한 연구", 한국표면공학회지, 48(5), pp.205~210 (2015), 한국표면공학회[DOI]
- D. Thorsteinsson, "Growth of HfN Thin Films by Reactive High Power Impulse Magnetron Sputtering", AIP Advances, 8, pp.1~14 (2018)