원자로 냉각재 펌프용 STS 304와 STS 415의 초음파-화학제염 공정 시 부식 손상 거동
Corrosion Damage Behavior of STS 304 and STS 415 for Reactor Coolant Pump during Ultrasonic-Chemical Decontamination Process
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we proposed a new ultrasonic-chemical decontamination process for decontaminating radioactive corrosion products during the maintenance of reactor coolant pump (RCP). The actual decontamination process was reproduced in the laboratory. And the corrosion characteristics of stainless steel (STS), constituting the RCP interior parts, were examined. The weight-loss measurment and polarization experiment were carried out in order to determine the corrosion characteristics of STS 304 and STS 415 by repeated decontamination processes. The STS 304 presented a little corrosion damage, which was almost indistinguishable from visual observation. The weight-loss rate of STS 304 was also significantly lower. On the other hand, STS 415 showed severe corrosion damage on its surface, greater weight-loss rate and higher corrosion current density than STS 304.
Abstract
In this study, we proposed a new ultrasonic-chemical decontamination process for decontaminating radioactive corrosion products during the maintenance of reactor coolant pump (RCP). The actual decontamination process was reproduced in the laboratory. And the corrosion characteristics of stainless steel (STS), constituting the RCP interior parts, were examined. The weight-loss measurment and polarization experiment were carried out in order to determine the corrosion characteristics of STS 304 and STS 415 by repeated decontamination processes. The STS 304 presented a little corrosion damage, which was almost indistinguishable from visual observation. The weight-loss rate of STS 304 was also significantly lower. On the other hand, STS 415 showed severe corrosion damage on its surface, greater weight-loss rate and higher corrosion current density than STS 304.
참고문헌 (10)
- E. Baumgartner, "Heterogeneous electron transfer as a pathway in the dissolution of magnetite in oxalic acid solutions", Inorg. Chem., 22, pp.2224~2226 (1983)[DOI]
- A. Cruickshank, "Developing techniques for decontamination", Nucl. Eng. Int., 28, pp.41~44 (1983)
- C.H. Jung, "Decontamination of radioactive corrosion products by KAERI decontamination process", J. of Korean Inst. of Resources Recycling, 8, pp.20~29 (1999)
- Literature review of dilute chemical decontamination processes for water-cooled nuclear reactors, EPRI-NP-1033, "G.R. Choppm", Battelle Pacific Northwest Labs, 216~ (1979)
- Source book for chemical decontamination of nuclear power plants, EPRI-NP-6433, "C.J. Wood", Electric Power Research Inst., 118~ (1989)
- 김성종, "원자로 냉각재 펌프용 스테인리스강에 대한 화학적 제염 공정 개발", 한국표면공학회지, 40(5), pp.234~240 (2007), 한국표면공학회
- 김성종, "원자로 냉각재 펌프용 스테인리스강에 대한 화학적 제염 공정 개발 (Ⅱ)", 한국표면공학회지, 40(6), pp.271~278 (2007), 한국표면공학회
- 김성종, "원자로 냉각재 펌프용 재료의 화학 제염 공정 시 적용 가능성 평가", 한국마린엔지니어링학회지, 31(1), pp.84~94 (2007), 한국마린엔지니어링학회
- M. Okabe, , Proceedings of international conference on stainless steels, pp.602~ (1991), ISU
- A.J. Sedriks, "Corrosion of stainless steels", pp.246~ (1996), Wiley interscience