기계화학적 연마공정중 패드내 미세공극에서의 연마입자의 거동
Slurry Particle behavior inside Pad Pore during Chemical Mechanical Polishing
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
In this paper, the results of finite element(FE) analysis of chemical mechanical polishing(CMP) process using 2-dimensional elements were discussed. The objective of this study is to find the generation mechanism of microscratches on a wafer surface during the process. Especially, a FE model with a particle inside pad pore was considered to observe how such a contact situation could contribute to microscratch generation. The results of the finite element simulations revealed that during CMP process the pad-particle mixture could be formed and this would be a major factor leading to microscratch generation.
Abstract
In this paper, the results of finite element(FE) analysis of chemical mechanical polishing(CMP) process using 2-dimensional elements were discussed. The objective of this study is to find the generation mechanism of microscratches on a wafer surface during the process. Especially, a FE model with a particle inside pad pore was considered to observe how such a contact situation could contribute to microscratch generation. The results of the finite element simulations revealed that during CMP process the pad-particle mixture could be formed and this would be a major factor leading to microscratch generation.
참고문헌 (13)
- Eusner, T., "Controlling Scratching in Cu Chemical Mechanical Planarization", Journal of The Electrochemical Society, 156, pp.H528~ (2009)
- Saka, N., "Scratching by Pad Asperities in Chemical-mechanical Polishing", CIRP Annals - Manufacturing Technology, 59(1), pp.329~332 (2010)
- Hung, C. -C., "Investigation of Copper Scratches and Void Defects after Chemical Mechanical Polishing", Japanese Journal of Applied Physics, 47, pp.7073~ (2008)
- Chandra, A., "Prediction of Scratch Generation in Chemical Mechanical Planarization", CIRP Annals - Manufacturing Technology, 57(1), pp.559~562 (2008)
- 성인하, "입자연마가공에서의 입자 형상의 영향에 대한 고찰", 한국윤활학회지, 26(4), pp.219~223 (2010), 한국윤활학회
- 양우열, "입자연마가공에서의 압력 속도 및 유체점도의 영향에 대한 고찰", 한국윤활학회지, 27(1), pp.7~12 (2011), 한국윤활학회
- 곽하슬로미, "입자연마가공에서의 입자크기 및 충돌각의 영향에 대한 고찰", 한국윤활학회지, 27(1), pp.34~39 (2011), 한국윤활학회
- Bathe, K., "Finite Element Analysis of Fluid Flows Fully Coupled with Structural Interactions", Computers and Structures, 72(1), pp.1~16 (1999)
- De, S., "On the method of finite spheres in applications: towards the use with ADINA and in a surgical simulator", COMPUTATIONAL MECHANICS, 31(1-2), pp.27~37, SPRINGER-VERLAG
- Li, Y., "Microelectronic applications of chemical mechanical planarization" (2007), Wiley-Interscience
- Feng, J., "Finite Element Simulation of Thermal Stress During Diffusion Bonding of Al2O3 Ceramic to Aluminium", Science and Technology of Welding and Joining, 8(2), pp.138~142 (2003)
- 김호중, "Investigation on Surface Hardening of Polyurethane Pads During Chemical Mechanical Polishing (CMP)", JOURNAL OF ELECTRONIC MATERIALS, 39(3), pp.338~346, SPRINGER
- Kim, H. J., "Fundamental Studies on the Scratches during CMP", Proceedings of the ICPT(International Conference on Planarization, 2010, ~