원심주조방식과 레이저 클래딩 증착법을 통한 화이트메탈의 기계 및 마찰특성 비교
Comparison of Mechanical properties and Surface Friction of White Metals Produced by Centrifugal and Laser Cladded on SCM440
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.
Abstract
Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.
참고문헌 (12)
- 김석구, "베어링 잔존 수명 예측을 위한 주파수 에너지 기반 특징신호 추출", 한국ITS학회 논문지, 16(2), pp.128~139 (2017), 한국ITS학회[DOI]
- Hyun, J. S., "Rolling bearing development and research trends", J. Korean Soc. Tribol. Lubr. Eng., 7(1), pp.7~15 (1991)
- Jun, J. U., "High strength's union of mass layers metal bearing", Journal of Korean Society for Precision Engineering, pp.792~795 (2004)
- 박태조, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제3보 - 딤플 수의 영향", 한국트라이볼로지학회지, 27(6), pp.302~307 (2011), 한국트라이볼로지학회
- Lee, J. H., "Laser cladding", Journal of Welding and Joinging, 18, pp.27~35 (2004)
- Seo, M. H., "Laser cladding technology", State of the art report, 11(1), pp.111~117 (1999)
- Wang, Y., "Microstructure and properties of laser cladding FeCrBSi composite powder coatings with higher Cr content", Journal of Materials Processing Technology, 214, pp.899~905 (2014)[DOI]
- Laser surface cladding - A literrature survey, Tech. Rep, "Gedda, H.", ~ (2000)
- 강남현, "레이저클래딩기술(오버레이용접법)", 대한용접접합학회지, 25(1), pp.7~8 (2007), 대한용접접합학회
- Telasang, G., "Structure-property correlation in laser surface treated AISI HI3 tool steel for improved mechanical properties", Mater. Sci. Eng., A, 599, pp.255~261 (2014)[DOI]
- OKKA, A., "Tribological characteristic of scm440 bearing steel in tractor", pp.15~ (2016)
- 최갑수, "초음파나노표면개질기술을 이용한 저널베어링 마찰 및 피로특성 연구", 한국트라이볼로지학회지, 31(1), pp.1~5 (2015), 한국트라이볼로지학회[DOI]