철계 복합 분말로 제조된 오버레이 용접층의 미세조직 및 특성
Microstructure and Characterization of Overlay Welding Layer using Fe-based Composite Powders
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the microstructure and characterization of an overlay welding layer using Fe-based composite powders are reported. The effects of the number of passes and composition of powders on the microstructure and mechanical properties are investigated in detail. The welding wire and powders are deposited twice on a stainless-steel rod using a laser overlay welding process. The microstructure and structural characterization are performed by scanning electron microscopy and X-ray diffraction. The mechanical properties of the first and second overlay layers are analyzed through the micro-Vickers-hardness tester and abrasion wear tester. In the second overlay layer, the hardness and specific wear are approximately 840 Hv and 2.0 × 10−5 mm3/Nm, respectively. It is suggested that the increase of the volume fractions of (Cr,Fe)7C3 and NbC phases in the second welding layer enhances the hardness and wear resistance.
Abstract
In this study, the microstructure and characterization of an overlay welding layer using Fe-based composite powders are reported. The effects of the number of passes and composition of powders on the microstructure and mechanical properties are investigated in detail. The welding wire and powders are deposited twice on a stainless-steel rod using a laser overlay welding process. The microstructure and structural characterization are performed by scanning electron microscopy and X-ray diffraction. The mechanical properties of the first and second overlay layers are analyzed through the micro-Vickers-hardness tester and abrasion wear tester. In the second overlay layer, the hardness and specific wear are approximately 840 Hv and 2.0 × 10−5 mm3/Nm, respectively. It is suggested that the increase of the volume fractions of (Cr,Fe)7C3 and NbC phases in the second welding layer enhances the hardness and wear resistance.
참고문헌 (12)
- S. Y. Hwang, , Journal of KWJS, 20, pp.70~ (2002)
- 강남현, "레이저클래딩기술(오버레이용접법)", 대한용접접합학회지, 25(1), pp.7~8 (2007), 대한용접접합학회
- S. H. Choo, , Korean J. Met. Mater, 38, pp.1175~ (2000)
- 김종철, "Cr 및 Nb 복합탄화물에 의한 철계 MAG 용접 오버레이의 내마모 특성", 대한용접접합학회지, 20(3), pp.54~59 (2002), 대한용접접합학회
- 김용래, "GTA 오버레이 용접부의 열유동 해석을 위한 용접열원 모델링", 대한용접접합학회지, 31(4), pp.62~66 (2013), 대한용접접합학회
- 강남현, "오스테나이트계 스테인리스강의 소재개발 및 용접기술", 대한용접접합학회지, 28(1), pp.10~14 (2010), 대한용접접합학회
- 유호천, "용접방법에 따른 오버레이 용접기술의 연구동향", 대한용접접합학회지, 31(1), pp.11~20 (2013), 대한용접접합학회
- E. R. Baek, , Journal of KWJS, 15, pp.11~ (1997)
- H. Lee, , Korean J. Met. Mater, 33, pp.895~ (1995)
- 유효선, "직류전위차법을 이용한 점용접부의 피로수명 평가", 대한용접접합학회지, 19(1), pp.58~64 (2001), 대한용접접합학회
- 정호신, "오스테나이트계 스테인리스강의 용접성과 내식성에 미치는 합금원소의 영향(I) - 응고균열 감수성을 중심으로 -", 대한용접접합학회지, 30(3), pp.255~263 (2012), 대한용접접합학회[DOI]
- H. B. Kim, , Journal of KWJS, 15, pp.78~ (1997)