TiO2, Carbon black 및 POE로 보강된 열가소성 PETG 복합재료의 특성
Characterization of PETG Thermoplastic Composites Enhanced TiO2, Carbon Black, and POE
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
In order to apply thermoplastic composites using PETG resin to various industrial fields such as bicycle frames and industrial parts, it is necessary to verify the impact resistance, durability and mechanical properties of the manufactured composite materials. To improve the mechanical properties, durability and impact resistance of PETG resin, an amorphous resin, in this study, compound and injection molding process were carried out using various additives such as TiO2, carbon black, polyolefin elastomer, and PETG amorphous resin. The thermal and mechanical properties of the thermoplastic composites, and the Charpy impact strength, The analysis was performed to evaluate the characteristics according to the types of additives. DSC and DMA analyzes were performed for thermal properties, and tensile strength, flexural strength, and tensile strength change rate were measured using a universal testing machine to evaluate mechanical properties. Charpy impact strength test was conducted to analyze the impact characteristics, and the fracture section was analyzed after the impact strength test. In the case of POE materialadded thermoplastic composites, thermal and mechanical properties tend to decrease, but workability and impact resistance tend to be superior to those of PETG materials.
Abstract
In order to apply thermoplastic composites using PETG resin to various industrial fields such as bicycle frames and industrial parts, it is necessary to verify the impact resistance, durability and mechanical properties of the manufactured composite materials. To improve the mechanical properties, durability and impact resistance of PETG resin, an amorphous resin, in this study, compound and injection molding process were carried out using various additives such as TiO2, carbon black, polyolefin elastomer, and PETG amorphous resin. The thermal and mechanical properties of the thermoplastic composites, and the Charpy impact strength, The analysis was performed to evaluate the characteristics according to the types of additives. DSC and DMA analyzes were performed for thermal properties, and tensile strength, flexural strength, and tensile strength change rate were measured using a universal testing machine to evaluate mechanical properties. Charpy impact strength test was conducted to analyze the impact characteristics, and the fracture section was analyzed after the impact strength test. In the case of POE materialadded thermoplastic composites, thermal and mechanical properties tend to decrease, but workability and impact resistance tend to be superior to those of PETG materials.
참고문헌 (16)
- D. Wang, "A Facile Evaluation on Melt Crystallization Kinetics and Thermal Properties of Low-density Polyethylene(LDPE)", Recycled Polyethylene Terephthalate(RPET) Blends, 2019, pp.2, 126~
- B. Yang, "Melt Crystallization and Thermal Properties of Graphene Platelets(GNPs) Modified Recycled Polyethylene Terephthalate(RPET) Composites: The Filler Network Analysis", Polymer Testing, 77, pp.112~ (2019)
- R. M. Meri, "Elasticity and Long-term Behavior of Recycled Polyethylene Terephthalate(rPET)", montmorillonite (MMT) Composites, 2014, pp.111, 453~
- W. Li, "Fabrication of Micro-pyramid Arrays on PETG Films by Roll-to-roll Hot Embossing", Microelectronic Engineering, 164, pp.100~ (2016)
- P. Franciszczak, "Manufacturing and Properties of r-PETG", PET FibreComposite -Novel Approach for Recycling of PETG Plastic Scrap into EngineeringCompound for InjectionMoulding, 2018, pp.154, 430~
- T. Chen, "Non-isothermalColdCrystallizationKinetics of Poly(ethylene glycol-co-1,4-cyclohexanedimethanol terephthalate)(PETG) Copolyesters with DifferentCompositions", Polymer Testing, 48, pp.23~ (2015)
- S. R. Montoro, "Alkali Resistance of Poly(ethylene terephthalate)(PET) and Poly(ethylene glycol-co-1,4-cyclohexanedimethanol terephthalate)(PETG) Copolyesters: The Role of Composition", Polymer Degradation and Stability, 120, pp.232~ (2015)
- Z. W. Zhu, "Hydrogen Adsorption on Graphene Sheets and Nonporous Graphitized Thermalcarbonblack at Low Surface Coverage", International Journal of Hydrogen Energy, 42, pp.18465~ (2017)
- N. Klomkliang, "Adsorption of Water and Methanol on HighlyGraphitized Thermalcarbonblack: The Effects of FunctionalGroup and Temperature on the IsostericHeat at Low Loadings", Carbon, 99, pp.361~ (2016)
- J. H. Arndt, "Characterization of the Chemical Composition Distribution of Polyolefin Plastomers", elastomers(ethylene, Polymer, pp.2018, 156[DOI]
- X. Zhang, "Selective Localization of Aluminum Oxide at Interface and its Effect on Thermal Conductivity in Polypropylene", polyolefin ElastomerBlends, 2019, pp.162, 662~
- K. Tanaka, "Injection Molding of Flat Glass FiberReinforced Thermoplastics", Modern Physics B, 24(15), pp.2555~ (2010)
- I. Pierro, "Polyolefin Thermoplastic Elastomers from 1-octene Copolymerization with 1-decene and Cyclopentene", European Polymer Journal, 93, pp.200~ (2017)
- H. A. Khonakdar, "Miscibility Analysis, Viscoelastic Properties and Morphology of Cyclic Olefin Copolymer", polyolefinelastomer (COC, Composites Part B: Engineering, pp.2015, 69[DOI]
- P. L. Ramkumar, "Aditya Cherukumudi, Investigation ofMelt Flow Index and Impact Strength of Foamed LLDPE for Rotational Moulding Process", Procedia Materials Science, 6, pp.361~ (2014)
- 권용일, "Simulation of injection-compression molding for thin and large battery housing", Current Applied Physics, 18(11), pp.1451~1457 (2018), 한국물리학회