ABS/PC/POE 열가소성 복합재료의 특성평가 및 시뮬레이션을 통한 물리적 성능 예측 연구
Characterization of ABS/PC/POE Thermoplastic Composites and Prediction of Mechanical Properties by Geometry Simulation
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, thermoplastic composites were manufactured using ABS(acrylonitrile butadiene styrene), PC(polycarbonate), and POE(polyolefin elastomer), which are thermoplastic plastics. Twin screw extruder and injection molding were used to manufacture thermoplastic composites. When the ABS/PC/POE thermoplastic composite material was manufactured, the POE mass fraction was set to 1 to 5 wt.%, and the thermal and mechanical properties according to the POE mass fraction were analyzed. Based on the physical properties of ABS/PC/POE, a 3D model in the form of an e-bike frame was created. After setting the boundary conditions, when an external load is applied, geometry simulation was performed to predict product performance. The ABS/PC/POE thermoplastic composite material exhibited the best physical properties when the mass fraction of POE was 3 wt.%. In the simulation results for the physical properties of the 3D model in the form of an e-bike frame, the best physical properties were shown when the mass fraction of POE was 2~3 wt.%. As a result, the manufacturing conditions for ABS/PC/POE thermoplastic composite materials were set, and research was conducted to reduce product development costs and development time.
Abstract
In this study, thermoplastic composites were manufactured using ABS(acrylonitrile butadiene styrene), PC(polycarbonate), and POE(polyolefin elastomer), which are thermoplastic plastics. Twin screw extruder and injection molding were used to manufacture thermoplastic composites. When the ABS/PC/POE thermoplastic composite material was manufactured, the POE mass fraction was set to 1 to 5 wt.%, and the thermal and mechanical properties according to the POE mass fraction were analyzed. Based on the physical properties of ABS/PC/POE, a 3D model in the form of an e-bike frame was created. After setting the boundary conditions, when an external load is applied, geometry simulation was performed to predict product performance. The ABS/PC/POE thermoplastic composite material exhibited the best physical properties when the mass fraction of POE was 3 wt.%. In the simulation results for the physical properties of the 3D model in the form of an e-bike frame, the best physical properties were shown when the mass fraction of POE was 2~3 wt.%. As a result, the manufacturing conditions for ABS/PC/POE thermoplastic composite materials were set, and research was conducted to reduce product development costs and development time.
참고문헌 (27)
- Eun Ji Sung, "Mechanical and Thermal Properties of Industrial Protective Fabric with Recycled m-Aramid and Natural Fiber", 한국염색가공학회지, 30(4), pp.227~236 (2018), 한국염색가공학회[DOI]
- 구선웅, "하이브리드 탄소섬유 적층구조에 따른 복합재료의 기계적 특성 연구", 한국염색가공학회지, 30(4), pp.313~320 (2018), 한국염색가공학회[DOI]
- 심지현, "산화그래핀 첨가에 따른 에폭시 나노 복합재료의 열적 및 기계적 특성 연구", 한국염색가공학회지, 30(2), pp.98~106 (2018), 한국염색가공학회[DOI]
- B. Yang, "Melt Crystallization and Thermal Properties of Graphene Platelets (GNPs) Modified Recycled Polyethylene trephthalate (RPET)Composites: The Filler Network Analysis", Polymer Testing, 77, pp.112~ (2019)
- Aryal Krishna Prasad, "-Cyclodextrin Functionalization of Activated Carbon-Carbon Nanotube Composites and Supramolecular Recognition of Ascorbic Acid", 새물리, 69(3), pp.290~294 (2019), 한국물리학회[DOI]
- 박은영, "Synthetic Hydrotalcite가 클로로프렌 고무 발포체의 내염수성에 미치는 영향 연구", 한국염색가공학회지, 31(3), pp.177~186 (2019), 한국염색가공학회[DOI]
- 이교영, "초임계 이산화탄소 염색 및 가공 기술", 한국염색가공학회지, 31(1), pp.48~64 (2019), 한국염색가공학회[DOI]
- 김태경, "초소수성 형광염료에 의한 고강도", 고분자량폴리에틸렌섬유의 염색, 2017, pp.29(4), 223~230[DOI]
- 유성훈, "TiO2, Carbon black 및 POE로 보강된 열가소성 PETG 복합재료의 특성", 한국염색가공학회지, 31(4), pp.354~362 (2019), 한국염색가공학회[DOI]
- Z. W. Zhu, "Hydrogen Adsorption on Graphene Sheets and Nonporous Graphitized Thermalcarbonblack at Low Surface Coverage", International Journal of Hydrogen Energy, 42, pp.18465~ (2017)
- 김혁진, "DTP 반응성 잉크용 저점도 아크릴계 고분자 전처리액 제조 및 특성 평가", 한국염색가공학회지, 29(3), pp.122~130 (2017), 한국염색가공학회
- 이정훈, "솔벤트 염료를 이용한 고강도 폴리에틸렌(HTPE) 필라멘트사의 염색성 및 기계적 물성 평가", 한국염색가공학회지, 29(3), pp.105~114 (2017), 한국염색가공학회
- 박성민, "안료 잉크용 바인더의 입자 크기가 직물의 태에 미치는 영향", 한국염색가공학회지, 32(4), pp.226~231 (2020), 한국염색가공학회[DOI]
- X. Zhang, "Selective Localization of Aluminum Oxide at Interface and Its Effect on Thermal Conductivity in Polypropylene", polyolefin Elastomer Blends, 2019, pp.162, 662~
- K. Tanaka, "Injection Molding of Flat Glass Fiber Reinforced Thermoplastics", Modern Physics B, 24(15), pp.2555~ (2010)
- R. M. Meri, "Elasticity and Long-term Behavior of Recycled Polyethylene terephthalate (rPET)", montmorillonite (MMT)Composites, 2014, pp.111, 453~
- 여영미, "새로운 천연염료로서 수련 잎 추출색소의 염색성과 기능성(2) : 견·모섬유를 중심으로", 한국염색가공학회지, 29(3), pp.171~179 (2017), 한국염색가공학회
- 정동석, "재귀반사 섬유의 개발 (Ⅰ) - Slit Yarn의 제조와 경사에 Slit Yarn사용에 의한 직물제조 -", 한국염색가공학회지, 29(3), pp.139~147 (2017), 한국염색가공학회
- 신승림, "초임계 유체 염색용 아조계 분산염료 합성 및 PET 섬유에 대한 염색 특성 연구", 한국염색가공학회지, 31(3), pp.135~146 (2019), 한국염색가공학회[DOI]
- I. Pierro, "Polyolefin Thermoplastic Elastomers from 1-Octene copolymerization with 1-Decene and Cyclopentene", European Polymer Journal, 93, pp.200~ (2017)
- 김혁진, "나일론 전사 DTP 원단 전처리에 따른 발색성 및 견뢰도 특성", 한국염색가공학회지, 31(2), pp.88~97 (2019), 한국염색가공학회[DOI]
- 김태경, "안트라퀴논계 초소수성 네이비 염료를 이용한 초고분자량 폴리에틸렌 섬유의 염색", 한국염색가공학회지, 31(2), pp.98~106 (2019), 한국염색가공학회[DOI]
- H. A. Khonakdar, "Miscibility Analysis, Viscoelastic Properties and Morphology of Cyclic Olefin Copolymer", polyolefinelastomer (COC, Composites Part B : Engineering, pp.2015, 69[DOI]
- 권용일, "Simulation of injection-compression molding for thin and large battery housing", Current Applied Physics, 18(11), pp.1451~1457 (2018), 한국물리학회
- N. H. Men, "Porous Structures Prepared by a Novel Route: Combination of Digital Light Processing 3D Printing and Leaching Method", Journal of Manufacturing Processes, 67, pp.46~ (2021)
- N. I. Zaaba, "Synthesis of Graphene Oxide using Modified Hummers Method: Solvent Influence", Procedia Engineering, 184, pp.469~ (2017)
- B. Demir, "A Predictive Model of Interfacial Interactions between Functionalised Carbon Fibre Surfaces Cross-linked with Epoxy Resin", Composites Science and Technology, 159, pp.127~ (2018)