단면형상에 따른 GF/rPET 열가소성 복합재료의 물리적 특성 연구
Mechanical Characteristics of GF/recycled PET Thermoplastic Composites with Chopped Fiber According to Cross Section
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Recently fiber-reinforced thermoplastic composites have attracted great interest from industry and study because they offer unique properties such as high strength, modulus, impact resistance, corrosion resistance, and damping reduction which are difficult to obtain in single-component materials. The demand for plastics is steadily increasing not only in household goods, packaging materials, but also in high-performance engineering plastic and recycling. As a result, the technology of recycling plastic is also attracting attention. In particular, many paper have studied recycling systems based on recycled thermoplastics. In this paper, properties of Glass Fiber Reinforced Thermoplastic( GFRTP) materials were evaluated using recycled PET for injection molding bicycle frame. The effect on thermal and mechanical properties of recycled PET reinforced glass chop fiber according to fiber cross section and fiber content ratio were studied. And it was compared void volume and torque energy by glass fiber cross section, which is round section and flat section. Mechanical characteristics of resulting in GF/rPET has been increased by increasing fiber contents, than above a certain level did not longer increased. And mechanical properties of flat glass fiber reinforced rPET with low void volume were most excellent.
Abstract
Recently fiber-reinforced thermoplastic composites have attracted great interest from industry and study because they offer unique properties such as high strength, modulus, impact resistance, corrosion resistance, and damping reduction which are difficult to obtain in single-component materials. The demand for plastics is steadily increasing not only in household goods, packaging materials, but also in high-performance engineering plastic and recycling. As a result, the technology of recycling plastic is also attracting attention. In particular, many paper have studied recycling systems based on recycled thermoplastics. In this paper, properties of Glass Fiber Reinforced Thermoplastic( GFRTP) materials were evaluated using recycled PET for injection molding bicycle frame. The effect on thermal and mechanical properties of recycled PET reinforced glass chop fiber according to fiber cross section and fiber content ratio were studied. And it was compared void volume and torque energy by glass fiber cross section, which is round section and flat section. Mechanical characteristics of resulting in GF/rPET has been increased by increasing fiber contents, than above a certain level did not longer increased. And mechanical properties of flat glass fiber reinforced rPET with low void volume were most excellent.
참고문헌 (13)
- S. Luigi, "Effect of Temperature on Static and Low Velocity Impact Properties of Thermoplastic Composites", Composites:Part B, 113(15), pp.110~ (2017)
- S. J. Pickering, "Recycling Technologies for Thermoset Composite Materials Current Status", Composites Part A: Applied Science and Manufacturing, 37(8), pp.1206~ (2006)
- 이기영, "목분강화 재활용폴리에틸렌 그린복합재료의 기계적 특성, 충격 특성 및 열변형온도", 엘라스토머 및 콤포지트, 46(3), pp.223~230 (2011), 한국고무학회
- Y. Yamamoto, "Friction andWear of Water Lubricated PEEKand PPS SlidingContacts: Part 2, CompositeswithCarbon orGlass Fibre", Wear, 257(1-2), pp.181~ (2004)
- B. P. Jang, "ImpactBehavior and Impactfatigue Testing of PolymerComposites", Composites Science and Technology, 44(2), pp.107~ (1992)
- 박진명, "랜덤상태의 E유리 단섬유 강화 불포화 폴리에스터 기반 수지복합재료의 물성 - E유리 단섬유의 길이와 함량 및 적층수의 영향 -", 한국염색가공학회지, 27(3), pp.165~174 (2015), 한국염색가공학회
- S. R. Montoro, "Influence ofVoids on the Flexural Resistance of the NCF", RTM6 Composites, 2011, pp.10, 3220~
- 조이석, "천연섬유", 천연고무 복합재료의 특성에 미치는 Kenaf 섬유함량의 영향, 2011, pp.46(3), 186~194[DOI]
- H. Takagi, "Effect of Fiber Length on Mechanical Properties of 'Green' Composites Using a Starch-BasedResin and ShortBamboo Fibers", JSME International J. Series A, Solid Mechanics and Material Engineering, 47(4), pp.551~ (2004)
- P. K. Mallick, "Fiber-Reinforced Composites: Materials, Manufacturing, and Design" (2007), CRC Press
- 조하니, "실란커플링제 처리가 폴리케톤섬유", 에폭시 복합재료의 계면접착성 및 물성에 미치는 영향, 2017, pp.29(2), 77~85[DOI]
- K. Tanaka, "Injection Molding of Flat Glass FiberReinforced Thermoplastics", Modern Physics B, 24(15), pp.2555~ (2010)
- T. Negoro, "Role of Crystallinity on Moisture Absorption and Mechanical Performance of Recycled PET Compounds", Energy Procedia, 89, pp.323~ (2016)