rCF/PP 복합재의 중량비 변화에 따른 기계적 물성 평가에 관한 연구
A Study on the Evaluation of Mechanical Properties According to the Change in Weight Percent of Recycled Carbon Fiber/Polypropylene Composites
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, the mechanical properties according to the rCF weight percent(10, 20, 30, 40, 50wt%) of the rCFRP specimen were evaluated and analyzed. First, to prepare rCFRP specimens, pellets were prepared according to the type of weight percent, and rCFRP tensile specimens according to ASTM D638 were prepared using an injection molding machine. Tensile tests were performed on each of 10 specimens according to weight percent conditions, and tensile strength and modulus of elasticity were calculated. For a detailed analysis of the correlation between the internal structure of the specimen and the mechanical properties, the weight percent to the constituent materials of the rCFRP specimen was calculated using mCT and used for the analysis of mechanical properties. For a more detailed analysis, a detailed analysis of the mechanical properties of rCFRP was performed through the fracture surface analysis of the specimen using FE-SEM.
Abstract
In this paper, the mechanical properties according to the rCF weight percent(10, 20, 30, 40, 50wt%) of the rCFRP specimen were evaluated and analyzed. First, to prepare rCFRP specimens, pellets were prepared according to the type of weight percent, and rCFRP tensile specimens according to ASTM D638 were prepared using an injection molding machine. Tensile tests were performed on each of 10 specimens according to weight percent conditions, and tensile strength and modulus of elasticity were calculated. For a detailed analysis of the correlation between the internal structure of the specimen and the mechanical properties, the weight percent to the constituent materials of the rCFRP specimen was calculated using mCT and used for the analysis of mechanical properties. For a more detailed analysis, a detailed analysis of the mechanical properties of rCFRP was performed through the fracture surface analysis of the specimen using FE-SEM.
참고문헌 (19)
- 신형곤, "CFRP 구멍가공 시 공구의 절삭성능에 관한 연구", 한국기계기술학회지, 20(6), pp.941~946 (2018), 한국기계기술학회[DOI]
- 송준혁, "머신러닝 알고리듬을 적용한 차량 프런트도어의 재활용 적합성 정량적 평가기법 연구", 한국기계기술학회지, 21(3), pp.411~417 (2019), 한국기계기술학회[DOI]
- Xiong, Z, "Bond behaviour of recycled aggregate concrete with basalt fibre-reinforced polymer bars", Composite Structures, 256(113078) (2021)
- Tang, Y, "Axial compression behavior of recycled- aggregate-concrete-filled GFRP–steel composite tube columns", Engineering Structures, 216(110676) (2020)
- Akbar, A., "Assessing recycling potential of carbon fiber reinforced plastic waste in production of eco-efficient cement-based materials", Journal of Cleaner Production, 274(123001) (2020)
- Galvez, P, "Effect of moisture and temperature on thermal and mechanical properties of structural polyurethane adhesive joints", Composite Structures, 247(112443) (2020)
- Rubino, F, "Marine application of fiber reinforced composites: A review", Journal of Marine Science and Engineering, 8(1), pp.26~ (2020)
- Sorrentino, L, "Effect of temperature on static and low velocity impact properties of thermoplastic composites", Composites Part B: Engineering, 113, pp.100~110 (2017)
- Liu, Y, "Recycling of carbon", epoxy composites, 2004, pp.94(5), 1912~1916
- Karuppannan Gopalraj, S., "A review on the recycling of waste carbon fibre", glass fibre-reinforced composites: Fibre recovery, properties and life-cycle analysis, 2020, pp.2(3), 1~21
- Falkner, R., "The Paris Agreement and the new logic of international climate politics", International Affairs, 92(5), pp.1107~1125 (2016)
- Eskander, S. M., "Reduction in greenhouse gas emissions from national climate legislation", Nature Climate Change, 10(8), pp.750~756 (2020)
- Aolaid, A, "The Dismantling of End-of-Life Vehicles in Estonia Before Putting into Effect the Directive 2000", 53, Environmental Science and Pollution Research, pp.2006, 13(2)[DOI]
- Rabe, D, "Recycling of Carbon Fibres and Subsequent Upcycling for the Production of 3D-CFRP Parts", Materials, 15(14), pp.5052~ (2022)
- Kim, D. H, "Enhanced and eco-friendly recycling of carbon-fiber-reinforced plastics using water at ambient pressure", ACS Sustainable Chemistry & Engineering, 8(6), pp.2433~2440 (2019)
- Meng, F, "From aviation to aviation: Environmental and financial viability of closed-loop recycling of carbon fibre composite", Composites Part B: Engineering, 200(108362) (2020)
- Muller, V, "Homogenization of elastic properties of short-fiber reinforced composites based on measured microstructure data", Journal of Composite Materials, 50(3), pp.297~312 (2016)
- Laureto, J. J, "Anisotropic mechanical property variance between ASTM D638-14 type i and type iv fused filament fabricated specimens", Polymer Testing, 68, pp.294~301 (2018)
- Grießer, A, "Machine Learning-based segmentation of individual Fibers in Micro- CT Scans with GeoDict", ~ (2018)