분위기 온도 하에서 ABS/PC 사출재의 기계적 특성
Mechanical Properties of ABS/PC Blend Injection Materials under Ambient Temperatures
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study was conducted for the purpose of suggesting a standard that can be used under ambient temperature by improving the low mechanical and thermal properties of ABS. PC was used as a filler, and post-curing conditions of the ABS/PC blend injection material were investigated. It was found that the ABS/PC blend injection material having a PC content of 20 wt.% or more showed little change in tensile properties at a temperature of 50°C, and a decrease in tensile properties of less than 10% at 80°C.
Abstract
This study was conducted for the purpose of suggesting a standard that can be used under ambient temperature by improving the low mechanical and thermal properties of ABS. PC was used as a filler, and post-curing conditions of the ABS/PC blend injection material were investigated. It was found that the ABS/PC blend injection material having a PC content of 20 wt.% or more showed little change in tensile properties at a temperature of 50°C, and a decrease in tensile properties of less than 10% at 80°C.
참고문헌 (10)
- M. G. Hwang., "Fracture Parameters of Short Carbon Fiber Reinforced Polycarbonate Composite Fabricated by Injection Molding Process", pp.2014
- D. R. Paul, "Polymer Blends", pp.435~ (1978), Academic Press Inc
- J. A. Manson, "Polymer Blends and Composites" (1976), Plenum
- I. T. Lee., "Thermal, Mechanical and Rheological Properties of Ternary PC", ABS Blends, 1991, pp.141(146), 141~146
- S. C. Lee., "Effect of Injection Molding Conditions on the Morphology and Mechanical Properties of PC", ABS Blends, 1996, 177~186
- 이용욱, "사출성형에서 유동선단과 구조물의 유동편차에 대한 연구", 한국기계기술학회지, 22(6), pp.1178~1183 (2020), 한국기계기술학회[DOI]
- 황순환, "사출성형 CAE를 이용한 스파이럴 금형의 형상 검증에 관한 연구", 한국기계기술학회지, 23(2), pp.204~210 (2021), 한국기계기술학회[DOI]
- "ASTM D 638, Standard Test Method for Tensile Properties of Plastics", Annual Book of ASTM Standards, ~ (2010)
- 한정영, "후경화 조건에 따른 에폭시 수지의 물성에 관한 연구", 한국생산제조학회지, 21(6), pp.976~981 (2012), 한국생산제조학회[DOI]
- Dal Lago E., "Influence of Different Carbon- Based Fillers on Electrical and Mechanical Properties of a PC", ABS Blend