산소 플라즈마 처리가 스테인레스 스틸 섬유의 표면 및 인장특성에 미치는 영향
Effect of Oxygen Plasma Treatment on the Surface and Tensile Properties of Stainless Steel Fibers
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The physicochemical properties of stainless steel fibers which were modified by oxygen plasma treatment were analyzed through microscopy and XPS analysis. The wettability of the surface of the stainless steel fiber was observed by measuring water contact angle to find out the effect of the plasma treatment time on the surface characteristics of the stainless steel fiber. In addition, in order to understand the effect of oxygen plasma treatment on the deterioration of the stainless steel fiber properties, the physical properties due to plasma treatment was investigated by measuring the weight reduction, tensile strength, elongation, tensile modulus of the stainless steel fibers according to the treatment time. As a result, the stainless steel fiber surface was etched by the oxygen plasma and the surface became more wettable by the introduction of hydrophilic functional groups. However the physical properties of the stainless steel fiber were not significantly deteriorated even if the surface of the stainless steel fiber made hydrophilic.
Abstract
The physicochemical properties of stainless steel fibers which were modified by oxygen plasma treatment were analyzed through microscopy and XPS analysis. The wettability of the surface of the stainless steel fiber was observed by measuring water contact angle to find out the effect of the plasma treatment time on the surface characteristics of the stainless steel fiber. In addition, in order to understand the effect of oxygen plasma treatment on the deterioration of the stainless steel fiber properties, the physical properties due to plasma treatment was investigated by measuring the weight reduction, tensile strength, elongation, tensile modulus of the stainless steel fibers according to the treatment time. As a result, the stainless steel fiber surface was etched by the oxygen plasma and the surface became more wettable by the introduction of hydrophilic functional groups. However the physical properties of the stainless steel fiber were not significantly deteriorated even if the surface of the stainless steel fiber made hydrophilic.
참고문헌 (15)
- L. J. Chen, "Preparation of Super-hydrophobic Surface on Stainless Steel", Applied Surface Science, 255(5), pp.3459~ (2008)
- Y. H. Kim, "Electronic and Smart Textiles", Communications of the Korean Institute of Information Scientists and Engineers, 31(1), pp.78~ (2013)
- H. W. Park, "R&D Trend for E-textile", Fashion Information and Technology, 11, pp.11~ (2014)
- E. S. Kim, "Textronics (electronic fiber) Trend and Technology Development Direction", Korea Evaluation Institute of Industrial Technology, 11, pp.43~ (2014)
- M. H. Park, "Trend in Development of Metal Fiber Fabrication Process", Journal of Korean Powder Metallurgy Institute, 19(6), pp.458~ (2012)
- 권미연, "산처리에 의한 금속섬유의 표면특성 및 에폭시 수지와의 계면접착 특성에 관한 연구", 한국섬유공학회지, 58(3), pp.161~166 (2021), 한국섬유공학회[DOI]
- S. J. Park, "Modifications Produced by Electrochemical Treatments on Carbon Blacks: Microstructures and Mechanical Interfacial Properties", Carbon, 39, pp.2011~ (2001)
- G. Z. Xiao, "Effects of Solvents on the Surface Properties of Oxygen Plasma-treated Polyethylene and Polypropylene Films", Journal of Adhesion Science and Technology, 11(5), pp.655~ (2012)
- Y. H. Kim, "A Theory of Healing at a Polymer-Polymer Interface", Macromolecules, 16, pp.1115~ (1983)
- W. Jia, "Effect of Polymer-Filler Interactions on PTC Behaviors of LDPE", EPDM Blends Filled with Carbon Black, 1997, pp.66, 1885~
- Z. F. Li, "Surface Modification of UHSPE Fibers through Allylamine Plasma Deposition II, Effect on Fiber and Fiber", epoxy Interface, 2003, pp.44, 333~
- 이승구, "플라즈마 처리가 유리섬유", PTFE 복합재료의 계면접착에 미치는 영향, 2003, pp.40(5), 431~439[DOI]
- 이윤응, "초극세형 폴리프로필렌부직포의 플라즈마를 이용한 표면개질", 한국염색가공학회지, 18(1), pp.20~27 (2006), 한국염색가공학회
- Y. Chen, "Surface Modification of Polyethylene by Plasma Pretreatment and UV-induced Graft Polymer ization for Improvement of Antithrombogenicity", Journal of Applied Polymer Science, 95(5), pp.201~ (2004)
- C. W. Joo, "Effect of Plasma Treatment on the Properties of Spunbond Nonwovens", Textile Science and Engineering, 38(7), pp.342~ (2001)