티타늄 지대주와 비귀금속 합금사이의 갈바닉 부식에 의한 표면 거칠기 변화 평가
Surface roughness changes caused by the galvanic corrosion between a titanium abutment and base metal alloy
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
연구 목적: 이 연구의 목적은 티타늄 지대주와 비귀금속 보철물이 접촉한 경우를 가정하여 이종 금속간 접촉에 의한 갈바닉 부식으로 인해 발생하는 표면 거칠기 변화를 비교, 평가하고자 하였다. 연구 재료 및 방법: 성분과 조성이 다른 3종의 Ni-Cr합금 (T3, Bella bond plus, Tilite)과 cp 티타늄 Grade 2를 이용하여 13 × 13 × 1.5 mm의 크기로 시편을 각 군당 6개씩 제작하였다. 연마과정 후 절연 테이프로 직경 6 mm만을 노출시켜 potentiostat (Parastat 2273A)를 이용하여 동전위 분극 시험과 갈바닉 부식 시험을 시행하였으며, 표면 거칠기 측정기 (Surftester SV-3000)를 이용하여 부식 전∙후 거칠기를 평가하였다. 측정값을 paired t-test와 One-way ANOVA로 분석하였다. 결과: 티타늄과 접촉한 모든 Ni-Cr 시편의 표면 거칠기는 통계적으로 유의하게 증가하였다. 증가량은 베릴륨을 포함한 T3합금 (0.016 ± .007 μm)이 가장 컸으며, 베릴륨을 포함하지 않은 Bella bond plus (0.012 ± .003 μm), 티타늄을 첨가한 Tilite (0.012 ± .002 μm)는 큰 차이를 보이지 않았다. 금속 종류에 따른 거칠기 증가는 유의한 차이를 보이지 않았다. 결론: 티타늄과 접촉한 비귀금속 합금은 갈바닉 부식에 의해 표면 거칠기가 증가하였다.
Abstract
PURPOSE: The purpose of this study was to evaluate the level of electro-chemical corrosion and surface roughness change for the cases of Ti abutment connected to restoration made of base metal alloys. MATERIALS AND METHODS: It was hypothesized that Ni-Cr alloys in different compositions possess different corrosion resistances, and thus the specimens (13×13×1.5 mm) in this study were fabricated with 3 different types of metal alloys, commonly used for metal ceramic restorations. The electrochemical characteristics were evaluated with potentiostat (Parstat 2273A) and the level of surface roughness change was observed with surface roughness tester. Paired t-test was used to compare mean average surface roughness (Ra) changes of each specimen group. RESULTS: All specimens made of nickel-chromium based alloys, average surface roughness was increased significantly (P < .05). Among them, the Ni-Cr-Be alloy (0.016 ± 0.007 μm) had the largest change of roughness followed by Ni-Cr (0.012 ± 0.003 μm) and Ni-Cr-Ti (0.012 ± 0.002 μm) alloy. There was no significant changes in surface roughness between each metal alloys after corrosion. CONCLUSION: In the case of galvanic couples of Ti in contact with all specimens made of nickel-chromium based alloys, average surface roughness was increased.
참고문헌 (16)
- Council on Dental Materials, Instruments, and Equipment, "American Dental Association status report on the occurrence of galvanic corrosion in the mouth and its potential effects", J Am Dent Assoc, 115, pp.783~787 (1987)
- Geis-Gerstorfer J, "In vitro substance loss due to galvanic corrosion in Ti implant", Ni-Cr supraconstruction systems, 1989, pp.4, 119~123
- Goehlich V, "Corrosion behavior of Pd-Cu and Pd-Co alloys in synthetic saliva", Dent Mater, 6, pp.103~110 (1990)
- Schmalz G, "Biological interactions of dental cast alloys with oral tissues", Dent Mater, 18, pp.396~406 (2002)
- Wylie CM, "Corrosion of nickel-based dental casting alloys", Dent Mater, 23, pp.714~723 (2007)
- Gil FJ, "In vitro corrosion behaviour and metallic ion release of different prosthodontic alloys", Int Dent J, 49, pp.361~367 (1999)
- Venugopalan R, "Evaluation of restorative and implant alloys galvanically coupled to titanium", Dent Mater, 14, pp.165~172 (1998)
- Quirynen M, "The influence of surface roughness and surface-free energy on supra- and subgingival plaque formation in man. A review of the literature", J Clin Periodontol, 22, pp.1~14 (1995)
- Bollen CM, "Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature", Dent Mater, 13, pp.258~269 (1997)
- Bollen CM, "The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis", Clin Oral Implants Res, 7, pp.201~211 (1996)
- "Dental metallic materials-corrosion test methods. 1st ed", ISO 10271 Standard, ~ (2001)
- Kay KS, "A study on the galvanic corrosion of titanium using the immersion and electrochemical method", J Korean Acad Prosthodont, 33, pp.584~609 (1995)
- Oh KT, "Electrochemical properties of suprastructures galvanically coupled to a titanium implant", JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 70B, pp.318~331 (2004)
- Lucas LC, "Biodegradation of restorative metallic systems", Adv Dent Res, 6, pp.32~37 (1992)
- Choi BC, "Corrosion of porcelain-fused-to-metal alloys", Dent Mater J SNU, 2, pp.155~189 (1992)
- Korean council for the faculty of dental materials, "Dental materials. 4th ed", pp.335~336 (2006), Koonja publishing Inc