본문 바로가기
KERD
논문KCI 등재

표면연마와 제작방법에 따른 임시 수복용 레진의 굽힘강도에 관한 연구

Comparison of flexural strength of temporary restorative resin according to surface polishing and different fabrication methods

이재인|임재훈
대한턱관절교합학회 (Korean academy of stomatognathic function and occlusion)|2021.03|구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)|제37권 제1호|pp. 16-22|DOI https://doi.org/10.14368/jdras.2021.37.1.16

2

조회

0

다운로드

2

인용

0

참고문헌

키워드

굽힘강도flexural strength임시 수복용 레진제작방법표면연마temporary restorative resinfabrication methodsurface polishing
주제분류치의학

초록

목적: 표면연마와 제작방법이 임시 수복용 레진의 굽힘강도에 미치는 영향을 분석하고자 한다. 연구 재료 및 방법: 4가지 제작방법을 이용하여 각각 30개의 임시 수복용 레진 시편을 제작하였고, 기계적 연마로 표면연마를 시행한 그룹과 연마를 시행하지 않은 2개의 그룹으로 나누었다. 시편은 37°C 항온기에 24시간 보관 후 만능시험기(Universal testing machine)을 이용하여 3점 굽힘강도를 측정하였다. 통계분석은 Two-way ANOVA와 Tukey’s HSD test, Paired t-test를 이용하여 분석하였다. 결과: 표면연마 여부와 관계없이 CAD/CAM milling으로 제작한 시편이 가장 높은 굽힘강도를 나타냈고, SLA 3D printing, DLP 3D printing, Conventional method 순으로 높은 굽힘강도를 나타냈다. 결론: 표면연마는 임시 수복용 레진의 굽힘강도에 유의한 영향을 끼치지 못했지만(P > 0.05), 제작방법에 의해서는 굽힘강도의 유의한 차이가 나타났다(P < 0.05).

Abstract

Purpose: The purpose of this study is to investigate the effect of surface polishing and fabrication method on the flexural strength of temporary restorative resin. Materials and Methods: Each of four fabrication methods was used to make 30 temporary restorative resin specimens and the specimens were divided into two groups depending on whether they were polished by mechanical polishing. Specimens were stored in 37°C thermostat for 24 hours. Flexural strength was measured using a universal testing machine (UTM). The data obtained through the experiment were analyzed with Two-way ANOVA, Tukey’s HSD test and Paired t-test. Results: CAD/CAM milling group showed the highest flexural strength regardless of surface polishing. In decreasing order, the flexural strength of the other fabrication method group was as follows SLA 3D printing, DLP 3D printing, and Conventional method group. Conclusion: Surface polishing did not affect flexural strength of the temporary restorative resin (P > 0.05). However, there were statistically significant differences in flexural strength depending on fabrication method (P < 0.05). (J Dent Rehabil Appl Sci 2021;37(1):16-22)

참고문헌 (22)

  1. Koumjian JH, "Marginal accuracy of provisional restorative materials", J Prosthet Dent, 63, pp.639~642 (1990)
  2. Burns DR, "A review of selected dental literature on contemporary provisional fixed prosthodontic treatment : report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics", J Prosthet Dent, 90, pp.474~497 (2003)
  3. Haselton DR, "Flexural Strength of Provisional Crown and Fixed Partial Denture Resins", J Prosthet Dent, 87, pp.225~228 (2002)
  4. Ireland MF, "In Vitro Mechanical Property Comparison of Four Resins Used for Fabrication of Provisional Fixed Restorations", J Prosthet Dent, 80, pp.158~162 (1998)
  5. Diaz-Arnold AM, "Microhardness of provisional fixed prosthodontics materials", J Prosthet Dent, 82, pp.525~528 (1999)
  6. Park JY, "In vitro assessment of the marginal and internal fits of interim implant restorations fabricated with different methods", J Prosthet Dent, 116, pp.536~542 (2016)
  7. Kim KB, "Three-dimensional evaluation of gaps associated with fixed dental prostheses fabricated with new technologies", J Prosthet Dent, 112, pp.1432~1436 (2014)
  8. 박상모, "3D 프린팅으로 제작된 여러 종류의 레진브릿지의 굴곡강도에 대한 연구", 구강회복응용과학지, 33(4), pp.260~268 (2017), 대한턱관절교합학회[DOI]
  9. Isil Karaokutan, "In vitro study of fracture strength of provisional crown materials", The Journal of Advanced of Prosthodontics, 7(1), pp.27~31 (2015), 대한치과보철학회[DOI]
  10. 조원탁, "제작방법에 따른 임시 수복용 레진의 파절강도 및 굴곡강도에 관한 연구", 대한치과보철학회지, 57(3), pp.225~231 (2019), 대한치과보철학회[DOI]
  11. Gonçalves TS, "Residual monomer of autopolymerized acrylic resin according to different manipulation and polishing methods. An in situ evaluation", Angle Orthod, 78, pp.722~727 (2008)
  12. Palitsch A, "Bonding of acrylic denture teeth to MMA", PMMA and light-curing denture base materials : the role of conditioning liquids, 2012, pp.40, 210~221
  13. Wang X, "High performance dental resin composites with hydrolytically stable monomers", Dent Mater, 34, pp.228~237 (2018)
  14. Donovan TE, "Physical properties of acrylic resin polymerized by four different techniques", J Prosthet Dent, 54, pp.522~524 (1985)
  15. Chee WW, "The effect of vacuum-mixed autopolymerizing acrylic resins on porosity and transverse strength", J Prosthet Dent, 60, pp.517~519 (1988)
  16. Yao J, "Comparison of the flexural strength and marginal accuracy of traditional and CAD", CAM interim materials before and after thermal cycling, 2014, pp.112, 649~657
  17. Tanapon Reeponmaha, "Comparison of fracture strength after thermo-mechanical aging between provisional crowns made with CAD", CAM and conventional method, 2020, pp.12(4), 218~224[DOI]
  18. Ayman AD, "The residual monomer content and mechanical properties of CAD", CAM resins used in the fabrication of complete dentures as compared to heat cured resins, 2017, pp.9, 4766~4772
  19. Matsumura H, "Three-body wear of four types of light-activated composite resin veneering materials", Quintessence Int, 25, pp.425~430 (1994)
  20. Peutzfeldt A, "Resin composites in dentistry : the monomer systems", Eur J Oral Sci, 105, pp.97~116 (1997)
  21. 이상호, "의료 3D 프린팅 기술의 전망 및 소아치과분야에서의 활용", 대한소아치과학회지, 43(1), pp.93~108 (2016), 대한소아치과학회[DOI]
  22. Dikova T, "Dimensional accuracy and surface roughness of polymeric dental bridges produced by different 3D printing processes", Arch Mater Sci Eng, 94, pp.65~75 (2018)

이 간행물의 다른 논문 (5건)

치과용 재료의 적층가공에 대한 문헌고찰강현구, 고경호, 조리라, 박찬진, 허윤혁, 원선pp. 1-15지르코니아 표면처리가 골유착에 미치는 영향송영균, 정진우pp. 23-30Heme effects of hemin on growth of peridontopathogens이성훈, 유현준pp. 31-38Selective Laser Sintering을 이용한 가철성 국소의치의 수복 증례임지훈, 신수연pp. 39-47장안모를 보이는 치주 질환자에서 하악 전치의 압하를 통한 과개 교합 치료 : 8년 경과 관찰박수병, 권은영, 김용일, 정경화, 김성식, 최윤경pp. 48-60
원문 보기