3D프린팅을 이용한 편성물의 역학적 특성 연구 -PLA, TPU 필라멘트를 중심으로-
A Study on the Mechanical Properties of Knit Fabric Using 3D Printing -Focused on PLA, TPU Filament-
0
조회
0
다운로드
19
인용
0
참고문헌
키워드
초록
Using FDM 3D printing, yarn shape and composition were modeled and 3D printed with PLA and TPU filaments currently used for apparel. Based on this, mechanical characteristics were measured to determine 3D printing yarn according to type of filaments in the 3D printed output and deformation and recovery characteristics due to differences in structure type. As a result of examining tensile and shear characteristics of PLA and TPU 3D printing compiles, TPU overall was measured with significantly lower stress than PLA. This is due to high elasticity of TPU's character, revealing that it has better flexibility than PLA. In addition, during deformation due to external forces, the more freedom between the head and foot parts of the loop, and the lower the force associated with each other, the more flexible it is. TPU revealed that it was easier to tension and recovery from tensile deformation than PLA, indicating potential for clothing materials using 3D printing. If high-molecular materials, such as PLA flexibility, it is likely to provide some flexibility through development of styles, including degree of freedom in modeling. Based on this, we provide basic data for developing 3D printing textures that can be satisfied with textile for apparel.
Abstract
Using FDM 3D printing, yarn shape and composition were modeled and 3D printed with PLA and TPU filaments currently used for apparel. Based on this, mechanical characteristics were measured to determine 3D printing yarn according to type of filaments in the 3D printed output and deformation and recovery characteristics due to differences in structure type. As a result of examining tensile and shear characteristics of PLA and TPU 3D printing compiles, TPU overall was measured with significantly lower stress than PLA. This is due to high elasticity of TPU's character, revealing that it has better flexibility than PLA. In addition, during deformation due to external forces, the more freedom between the head and foot parts of the loop, and the lower the force associated with each other, the more flexible it is. TPU revealed that it was easier to tension and recovery from tensile deformation than PLA, indicating potential for clothing materials using 3D printing. If high-molecular materials, such as PLA flexibility, it is likely to provide some flexibility through development of styles, including degree of freedom in modeling. Based on this, we provide basic data for developing 3D printing textures that can be satisfied with textile for apparel.
참고문헌 (15)
- Choi, K., "An energy model of plain knitted fabric", Textile research journal, 73(8), pp.739~748 (2003)[DOI]
- 김효진, "텍스타일 스트럭처 원리와 연계된3D 프린팅 개발 유형 분석", 패션 비즈니스, 22(2), pp.1~13 (2018), 한국패션비즈니스학회[DOI]
- 김슬기, "3D프린팅을 이용한 텍스타일 제조 기술동향", 한국의류산업학회지, 20(2), pp.117~127 (2018), 한국의류산업학회[DOI]
- 김태진, "PLA", PBAT, 폴리머, pp.2016, 40(3)[DOI]
- Lee, C., "A characteristic analysis on 3D printing materials for textiles", Korea Science & Art Forum, pp.24~ (2016)
- 이정민, "네틀 데님소재의 태의 변화에 관한 연구", 패션 비즈니스, 22(2), pp.107~117 (2018), 한국패션비즈니스학회[DOI]
- Lee, J., "Study of textile structure using 3D printing focused on the comparison of - FDM and DLP -", Korea Science & Art Forum, 31, pp.329~340 (2017)
- 이종석, "3D프린팅 패브릭을 활용한 패션 디자인 연구", 브랜드디자인학연구, 14(3), pp.247~256 (2016), 사단법인 한국브랜드디자인학회[DOI]
- 이선희, "용융 수지 압출 조형방식 3D 프린팅으로 제조된 텍스타일의 형태 및 물성", 한국섬유공학회지, 52(4), pp.272~279 (2015), 한국섬유공학회
- 이선희, "고탄성 특성을 보유한 친환경 우븐 바닥재에 관한 연구(II) - TPU 코팅사 및 바닥재의 특성-", 한국의류산업학회지, 14(4), pp.635~640 (2012), 한국의류산업학회
- Lussenburg, K., "Designing with 3D printed textiles: A case study of material driven design", iCAT 2014: Proceedings of the 5th International Conference on Additive Technologie, pp.16~17 (2014)
- Pei, E., "Direct 3D printing of polymers onto textiles: Experimental studies and applications", Rapid Prototyping Journal, 21(5), pp.556~571 (2015)[DOI]
- 김유진, "3D 프린터 용 PLA", LDPE 고분자 블렌드 모노필라멘트, 2018, pp.55(3), 158~163[DOI]
- 신윤정, "3D 프린터 필라멘트 제작용 대나무", PLA 바이오복합재료 개발 연구, 2018, pp.46(1), 107~113[DOI]
- "The National IT Industry Promotion Agency" (2018)[URL]