FDM 3D 프린팅 기술로 제작된 3D 프린팅 레이스/보일 복합직물의 역학적 특성 및 세탁성 평가
Evaluation of Mechanical Properties and Washability of 3D Printed lace/voil Composite Fabrics Manufactured by FDM 3D printing Technology
0
조회
0
다운로드
14
인용
0
참고문헌
키워드
초록
In this study, fused deposition modellig(FDM) 3D printing technology has been applied directly to polyester voil fabric to produce 3D printed lace/voil composite fabrics. A stereolithograpy(STL) file with a lace type 3D modelling under the various thickness were prepared and transformed into a g-code file using a g-code generator. The extrusion conditions for FDM 3D printing were controlled by 50mm/s of nozzle speed, 235oC of nozzle temperature, 40oC of heating bed temperature. 3D printed lace/voil composite fabriscs manufactured by 3D printing based on FDM using a thermoplactic polyurethane(TPU) filaments were obtained. To evaluate the mechanical properties and washability of the fabricated 3D printed lace/voil composite fabric, KES-FB system test, washing fastness test and dry cleaning resistance test were conducted. As 3D printing thickness increased, KOSHI, NUMERI, and FUKURAMI of 3D printed lace/voil composite fabric increased. From the results of the primary hand value test, 3D printed lace/voil composite fabrics were confirmed to be applicable to women's summer garments. As a result of the washability and dry cleaning resistance test of the 3D printed lace/voil composite fabrics, all samples were graded 4-5.
Abstract
In this study, fused deposition modellig(FDM) 3D printing technology has been applied directly to polyester voil fabric to produce 3D printed lace/voil composite fabrics. A stereolithograpy(STL) file with a lace type 3D modelling under the various thickness were prepared and transformed into a g-code file using a g-code generator. The extrusion conditions for FDM 3D printing were controlled by 50mm/s of nozzle speed, 235oC of nozzle temperature, 40oC of heating bed temperature. 3D printed lace/voil composite fabriscs manufactured by 3D printing based on FDM using a thermoplactic polyurethane(TPU) filaments were obtained. To evaluate the mechanical properties and washability of the fabricated 3D printed lace/voil composite fabric, KES-FB system test, washing fastness test and dry cleaning resistance test were conducted. As 3D printing thickness increased, KOSHI, NUMERI, and FUKURAMI of 3D printed lace/voil composite fabric increased. From the results of the primary hand value test, 3D printed lace/voil composite fabrics were confirmed to be applicable to women's summer garments. As a result of the washability and dry cleaning resistance test of the 3D printed lace/voil composite fabrics, all samples were graded 4-5.
참고문헌 (18)
- Cho, G. S., "Clothing and environment" (2009), Dongsumoonhwasa
- Choi, G. B., "Adaptive modeling method for 3-D printing with various polymer materials", Fibers and Polymers, 17(7), pp.977~983 (2016)[DOI]
- 전재훈, "보급형 3D 프린터를 활용한 착용형 패션 프로토타입 개발", 한국의류학회지, 41(3), pp.468~486 (2017), 한국의류학회
- Gurcum, B. H., "Implementing 3D printed structures as the newest textile form", Journal of Fashion Technology & Textile Engineering, S4 (2018)
- Kang, M. Y., "Design development of lace type 3D textile", Proceedings of the Society of Fashion & Textile Industry, Fall Conference, pp.241~ (2017)
- Kang, M. Y., "Analysis of physical properties of lace type 3D textile", Proceedings of the Society of Fashion & Textile Industry, Fall Conference, pp.24~ (2017)
- Kawabata, S., "The standardization and analysis of hand evaluation, 2nd Ed." (1980)
- Kim, H. J., "Development of textile design using oriental motif by applying 3D modeling technique", Proceedings of the Korean Society of Clothing and Textiles, Fall Conference, pp.103~ (2017)
- Kim, M. J., "Analysis of physical properties of 3D textiles by 3D printing output condition and heat treatment process", Proceedings of the Korean Society of Clothing and Textiles, Fall Conference, pp.107~ (2017)
- 김슬기, "3D프린팅을 이용한 텍스타일 제조 기술동향", 한국의류산업학회지, 20(2), pp.117~127 (2018), 한국의류산업학회[DOI]
- 구다솜, "3D 스캐너와 3D 프린터를 활용한 손목보호대 개발", 한국의류산업학회지, 19(3), pp.312~319 (2017), 한국의류산업학회[DOI]
- Korean agency for technology., "KS K ISO 6330:2011 Textiles - Domestic washing and drying procedures for textile testing", Korean agency for technology and standards, ~ (2011)
- Korean agency for technology., "KS K ISO 105-D01:2015 - Textiles - Tests for colour fastness - Part D01:Colour fastness to dry cleaning", Korean agency for technology and standards, ~ (2015)
- 이선희, "용융 수지 압출 조형방식 3D 프린팅으로 제조된 텍스타일의 형태 및 물성", 한국섬유공학회지, 52(4), pp.272~279 (2015), 한국섬유공학회
- Lee, S. H., "Characterization of lace type 3D textiles manufactured by 3-dimensional fused deposition modelling", Proceeding's of 14th Asian Textile Conferences (2017)
- Lee, S. H., "Tensile property and stiffness of 3D printing lace and their voil composite fabrics manufactured by various roller processing", Fibers and Polymers (2018)
- 박정현, "3D 프린팅 기술을 활용한 낙상충격 보호패드 구조설계 및 필라멘트 소재에 따른 특성 비교", 한국의류학회지, 41(5), pp.939~949 (2017), 한국의류학회
- Pei, E., "Direct 3d printing of polymers onto textiles: Experimental studies and applications", Rapid Prototyping Journal, 21(5), pp.556~571 (2015)[DOI]