SLS 3D 프린팅 기술을 적용한 직물 유연성이 발현된 직물구조적인 설계디자인
Textile Structural Design with Fabric Flexibility using SLS 3D Printing Technology
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Recently, 3D printing technology, which is suitable for small-volume production of many varieties, has become considered a key manufacturing technology in the 4th industrial revolution. However, the nature of 3D printing technology means it is not yet able to be applied to traditional textiles due to Fabric Flexibility. The aim of this study is to investigate Textile Structural Design by finding the optimal yarn thickness for Selective Laser Sintering (SLS) 3D printed structures on geogrid dobby woven fabric that gives the optimal flexibility and tensile strength in the final product. The test results for tensile load strength of the 3D printed test samples, using 1.0mm, 0.8mm, 0.6mm and 0.4mm yarn thicknesses, showed that all were found to be above 250N, this higher than the tensile strength of 180N that is recommended for textile products. Based on these results, the four dobby structural patterns with 3D printing produced had four yarn thicknesses: 1.0mm, 0.8mm, 0.6mm, and 0.4mm. The thinner the yarn, the more flexible the fabric; as such the optimal conditions to produce SLS-based 3D printed textiles with suitable strength and flexibility used a thickness of yarn in the range of 0.4mm to 0.6mm.
Abstract
Recently, 3D printing technology, which is suitable for small-volume production of many varieties, has become considered a key manufacturing technology in the 4th industrial revolution. However, the nature of 3D printing technology means it is not yet able to be applied to traditional textiles due to Fabric Flexibility. The aim of this study is to investigate Textile Structural Design by finding the optimal yarn thickness for Selective Laser Sintering (SLS) 3D printed structures on geogrid dobby woven fabric that gives the optimal flexibility and tensile strength in the final product. The test results for tensile load strength of the 3D printed test samples, using 1.0mm, 0.8mm, 0.6mm and 0.4mm yarn thicknesses, showed that all were found to be above 250N, this higher than the tensile strength of 180N that is recommended for textile products. Based on these results, the four dobby structural patterns with 3D printing produced had four yarn thicknesses: 1.0mm, 0.8mm, 0.6mm, and 0.4mm. The thinner the yarn, the more flexible the fabric; as such the optimal conditions to produce SLS-based 3D printed textiles with suitable strength and flexibility used a thickness of yarn in the range of 0.4mm to 0.6mm.
참고문헌 (30)
- (2016)[URL]
- "The Journal of Science and Technology Policy", 2016, 24~31
- Chun, S, "Development of 3D printing technology-based composite material printing device", Master, pp.2015
- 3D printing market and technology trends. S & T Market Reports, "Commercializations Promotion Agency for R&D Outcomes", COMPA, ~ (2019)
- "Continuum Fashion and Shapeways, 2011" (2011)[URL]
- "Iris Van Herpen’s new collection includes 3D printed magma dresses" (2016)[URL]
- (2015)[URL]
- "Iris Van Herpen, 2010" (2010)[URL]
- "Iris Van Herpen, 2015a" (2015)[URL]
- "Iris Van Herpen, 2015b" (2015)[URL]
- 김혜은, "3D 프린팅을 활용한 모자 디자인 제안 - 리본을 변형한 디자인을 중심으로 -", 한국패션디자인학회지, 16(3), pp.29~45 (2016), 한국패션디자인학회[DOI]
- 김효숙, "패션분야의 3D 프린팅 활용 현황에 관한 연구", 한국의상디자인학회지, 17(2), pp.125~143 (2015), 한국의상디자인학회
- 김효진, "텍스타일 스트럭처 원리와 연계된3D 프린팅 개발 유형 분석", 패션 비즈니스, 22(2), pp.1~13 (2018), 한국패션비즈니스학회[DOI]
- (2020)[URL]
- 김관배, "3D프린팅을 활용한 파라매트릭 디자인 제품에 관한 연구", 디자인융복합연구(구.인포디자인이슈), 17(3), pp.71~89 (2018), 디자인융복합학회(구.한국인포디자인학회)[DOI]
- Kim, Y., "A study on 3D printing fashion materials applying the modeling principle of fractal geometry: Focusing on basic texture application of fashion materials", doctor, pp.2017
- "KATRI", 2013
- Korea Consumer Agency, "Recommended quality standard for textile products", KCA, ~ (2010)
- 이종석, "3D 프린팅을 활용한 텍스타일 구조 연구 -FDM과 DLP방식의 비교 연구를 중심으로-", 한국과학예술융합학회, 31, pp.329~340 (2017), 한국전시산업융합연구원[DOI]
- 이종석, "DLP 방식 3D 프린팅을 활용한 패션 디자인 연구", 기초조형학연구, 18(5), pp.449~460 (2017), 한국기초조형학회
- (2019)[URL]
- 이웅섭, "FDM 3D 프린터 출력물을 활용한 하이힐 디자인 개발", 한국디자인포럼, (48), pp.521~530 (2015), 한국디자인트렌드학회[DOI]
- "Lost Luggage Kit, 2000" (2014)[URL]
- Park, J, "A study on fatigue characteristics of PA2200 injection molding core fabricated by SLS 3D printing", Master, pp.2020
- "Principle of SLS Techniques" (2013)[URL]
- Test reports: 3D printing tensile test(2020-M0146), "Reliability Solution Provider", RSP, ~ (2020)
- 송하영, "3D 프린팅을 활용한 패션단추 디자인 제안 -꽃잎 형상을 응용한 디자인 중심으로-", 한국디자인문화학회지, 25(1), pp.231~243 (2019), 한국디자인문화학회
- 송하영, "SLS 방식의 3D 프린팅 기술을 활용한 직물구조적인 디자인설계 연구 -유연성 있는 직조구조 직물설계를 중심으로-", 패션 비즈니스, 23(3), pp.67~84 (2019), 한국패션비즈니스학회[DOI]
- Shin, E., "Study to develop and enhance the utilization of 3D technology : Focused on case studies in dental field", master, pp.2018
- Yoo, H., (2012), Hyungseul Publishing Ltd