Computerized Human Body Modeling and Work Motion-capturing in a 3-D Virtual Clothing Simulation System for Painting Work Clothes Development
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.
Abstract
By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.
참고문헌 (15)
- 배현숙, "조선소 도장작업자의 작업환경 및 작업복 착의실태 분석", 한국의류학회지, 34(3), pp.518~528 (2010), 한국의류학회
- 배현숙, "산업현장의 작업환경 및 공정에 따른 작업복 착의실태-기계·자동차·조선업을 중심으로-", 한국의류학회지, 34(8), pp.1378~1391 (2010), 한국의류학회
- Kim, H., "Study on the skin absorption", Journal of Korean Society of Occupational and Environmental Hygiene, 7(2), pp.279~288 (1997)
- 박진아, "메카트로닉스 산업용 일반 작업복 개발 - 춘하 및 동절기 작업복 평가를 중심으로 -", 복식, 61(9), pp.97~113 (2011), 한국복식학회
- 박진아, "남성용 작업복 팬츠 3차원 가상착의 시뮬레이션 평가", 복식, 63(8), pp.27~42 (2013), 한국복식학회[DOI]
- 박진아, "3차원 가상착의 시뮬레이션을 이용한 20~50대 연령별 남성 작업복 점퍼 패턴 설계 및 외관평가", 패션 비즈니스, 16(1), pp.103~120 (2012), 한국패션비즈니스학회
- 박진아, "The Analysis of the Painting Work Clothes Clothing Comfort and Wearer Mobility Considering the Work Environment in the Machine and Shipbuilding Industries", 패션 비즈니스, 16(3), pp.13~31 (2012), 한국패션비즈니스학회[DOI]
- 박진아, "The Classification of Manufacturing Work Processes to Develop Functional Work Clothes - With a Reference to the Automobile, Machine and Shipbuilding Industries -", 패션 비즈니스, 16(6), pp.21~35 (2012), 한국패션비즈니스학회
- Rosenblad, W. E., "User-oriented Product Development Applied to Functional Clothing Design", Applied Ergonomics, 16(4), pp.279~ (1985)
- 심상효, "자동차 정비업체 도장공정의 작업환경 및 근로자 노출 실태에 관한 연구", 한국환경보건학회지, 35(3), pp.153~161 (2009), 한국환경보건학회
- Concurrent Engineering in the Design of Protective Clothing: Interfacing with Equipment Design, Performance of Protective Clothing:Improvement through Innovation, "Ashdown, S. P.", ASTM, 471~485 (1996)
- "Industrial Accident Statistics" (2012)[URL]
- "DC Suite, Physan Co." (2015)[URL]
- "3DS Max®" (2015)[URL]
- "Maya®" (2015)[URL]