3차원 인체형상과 3차원 동작분석에 의한 방화복 소매패턴 개발
Development of Sleeve Patterns of Structural Firefighting Protective Clothing using by 3D Body Shape and 3D Motion Analysis
0
조회
0
다운로드
12
인용
0
참고문헌
키워드
초록
This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder’s flexion and the joint angle of the range of wrist’s ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern,we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers’ range of motion.
Abstract
This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder’s flexion and the joint angle of the range of wrist’s ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern,we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers’ range of motion.
참고문헌 (20)
- Adams. P. S, "A model for protective clothing effects on performance", International Journal of Clothing Science and Technology, 6(4), pp.6~16 (1994)
- 조자영, "기능성 의복의 인간공학적 평가 체계 개발 및 적용: 방염복의 평가 및 개선 대상 파악", 대한인간공학회지, 26(2), pp.1~13 (2007), 대한인간공학회
- Chung, J. S., "A study of the Korean standards for firefighters’ uniforms", Journal of the Korean Economics Association, 36(9), pp.1~11 (1998)
- 한설아, "한국 소방용 방화복에 대한 만족도 조사", 복식, 58(9), pp.166~175 (2008), 한국복식학회
- Huck. J., "Protective overalls : evaluation of garment design and fit", International Journal of Clothing Science and Technology, 9(1), pp.45~61 (1996)
- Huck. J., "Coveralls for grass fire fighting", International Journal of Clothing Science and Technology, 9(5), pp.346~359 (1997)
- Huck. J., "Protective clothing systems : A technique for evaluating restriction of wearer mobility", Applied Ergonomics, 19(3), pp.185~190 (1988)
- 정정숙, "한국 소방대원 방수피복의 소재특성에 관한 비교 연구", Family and Environment Research, 40(5), pp.15~24 (2002), 대한가정학회
- Kim. D. S., "A study on the durability of protective cloth of fire fighter", 박사, pp.2006
- Kim, E. K., "A Study on the Actual Condition of Korean Firefighter’s Protective Clothing", Journal of the Korean Society of Clothing and Textiles, 21(1), pp.93~103 (1997)
- Kim, S. S., "A study of the working clothes at construction worksites to improve movement and physiological functionality", 박사, pp.2005
- Kim, Y. H., "Fire fighter coverall : A study in functional apparel design", 박사, pp.1996
- Korean Agency for Technology and Standards, "5 th Size korea. Ministry of Knowledge Economy", Korean Agency for Technology and Standards, ~ (2004)
- Lim, H. K., "A study of measurement on reach of motion using a 3-D motion analysis system for korean adults(20’s and 30’s)", Korean Journal of Sports Biomechanics, 8(2), pp.1~20 (1998)
- Ministry of public administration and security, "Firefighters protective clothing", Ministry of public administration and security, ~ (2004)
- Park, S. S., "Sports biomethanics" (2005), Dkbooks
- Ryu, S. A., "A Study on the Lower Body Range of Motion(Using a 3-D Motion Analysis System)bout Korean Adults", The Research Journal of the Costume Culture, 8(5), pp.741~753 (2000)
- Shin, D. S., "Evaluation for thermal protective performance of protective clothing", 석사, pp.2006
- Yoo, H. S., "Change of physical and mechanical properties of firefighter protective clothing after radiant heat exposure", Journal of the Korean Society of Clothing and Textiles, 23(6), pp.853~863 (1999)
- 윤훈용, "한국 중장년층의 동작범위에 관한 연구", 대한인간공학회지, 21(2), pp.35~46 (2002), 대한인간공학회