3차원 가상착의를 활용한 방호복 평가
Evaluation of Protective Clothing Using 3D Virtual Fitting
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing`s allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.
Abstract
The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing`s allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.
참고문헌 (27)
- 문지현, "시판 부직포 전신 보호복의 패턴형상 및 유형분석", 한국의류학회지, 40(2), pp.273~286 (2016), 한국의류학회
- 박진아, "3차원 가상착의 시스템을 활용한 남성용 커버롤 도장 작업복의 작업동작 적합성 평가", 패션 비즈니스, 24(4), pp.63~84 (2020), 한국패션비즈니스학회[DOI]
- 문수희, "COVID-19 감염병전담병원 간호사의 조직몰입에 미치는 영향요인", 중환자간호학회지, 15(2), pp.39~49 (2022), 한국중환자간호학회[DOI]
- H. Lee, "The Development of Sizing Systems for Disposable Protective Coveralls Considering Korean Men and Women", 박사, pp.2018
- S. L. Davey, "Heat Stress and PPE during COVID-19: Impact on Healthcare Workers` Performance, Safety and Well-being in NHS Settings", Journal of Hospital Infection, 108, pp.185~ (2021)
- M. A. Alarfaj, "Impact of Wearing Personal Protective Equipment on the Performance and Decision Making of Surgeons during the COVID-19Pandemic: An Observational Cross-sectional Study", Medicine, 100(37), pp.1~ (2021)
- 임가영, "COVID-19 감염병 대응 의료진의 개인보호구 개선사항 분석 및 동작 프로토콜 개발 - 동작적합성과 쾌적성을 중심으로 -", 한국지역사회생활과학회지, 32(3), pp.363~379 (2021), 한국지역사회생활과학회
- L. Lou, "Wearable Cooling and Dehumidifying System for Personal Protective Equipment(PPE)", Energy and Buildings, 276, pp.1~ (2022)
- R. K. Vidua, "Problems Arising from PPE When Worn for Long Periods", Medico-Legal Journal, 88(1_suppl), pp.47~ (2020)
- 방창훈, "소방용 보호장구 착용시 능동적 냉각방법에 따른 신체반응 연구 - 얼음조끼 장착 중심으로 -", 한국방재학회논문집, 15(1), pp.207~213 (2015), 한국방재학회
- 엄란이, "여름철 환경에서 팬이 있는 조끼의 인체 착용 효과", 한국의류학회지, 43(6), pp.856~865 (2019), 한국의류학회[DOI]
- 정재연, "여름철 작업자들의 고체온증 예방을 위한 액체냉각복 개발 및 효과적인 냉각온도와인체 냉각부위 탐색", 한국의류산업학회지, 22(2), pp.250~260 (2020), 한국의류산업학회
- 김도형, "소방복 내 노멕스 냉각복 착용이 모의 소방동작 동안 소방관의 작업 효율에 미치는 영향", 한국생활환경학회지, 26(1), pp.9~24 (2019), 한국생활환경학회[DOI]
- Yijie Zhang, "Numerical investigation of heat transfer in a garment convective cooling system", Fashion and Textiles, 9(1), pp.1~14 (2022), 한국의류학회[DOI]
- 방창훈, "소방훈련시 화학보호복 착용에 따른 동작만족도 연구", 한국화재소방학회 논문지, 34(3), pp.110~115 (2020), 한국화재소방학회[DOI]
- 김인수, "과수재배 농업인을 위한 기능성 농약 방제복 개발 및 평가", 한국지역사회생활과학회지, 33(4), pp.703~716 (2022), 한국지역사회생활과학회
- 권주연, "COVID-19 감염병 대응 의료진용 개인보호복의 동작성 및 생리적 부담 평가를 위해 개발된 모의 작업 프로토콜의 타당도", 한국의류산업학회지, 24(5), pp.655~665 (2022), 한국의류산업학회
- 이옥경, "육군용 화생방보호의 개발을 위한 기초 실태 조사", 한국생활과학회지, 31(1), pp.99~112 (2022), 한국생활과학회[DOI]
- 오영순, "농약방제복 착용실태 및 만족도에 관한 연구", 한국의상디자인학회지, 16(4), pp.217~228 (2014), 한국의상디자인학회
- 문지현, "일회용 전신 보호복 치수 설계를 위한 한국인 인체 치수 분석", 한국의류학회지, 37(8), pp.1117~1129 (2013), 한국의류학회
- 전은경, "국내 시판 일회용 올인원 방역 보호복의 사이즈 분석", 한국의류학회지, 37(5), pp.655~666 (2013), 한국의류학회
- 김시연, "소방방화복을 착용했을 때의 소방진압 업무 적합도 평가 프로토콜의 개발", 한국화재소방학회 논문지, 30(1), pp.138~148 (2016), 한국화재소방학회[DOI]
- 이효현, "대한민국 해군 기존 하절기 함상복과 개발 하절기 함상복의 동작적합성 및 착용 생리반응 평가", 한국생활환경학회지, 23(6), pp.853~867 (2016), 한국생활환경학회[DOI]
- J. Larsson, "Physiological Demands and Characteristics of Movement during Simulated Combat", Military Medicine (2022)
- B. Schram, "The perceived effects and comfort of various body armour systems on police officers while performing occupational tasks", Annals of Occupational and Environmental Medicine, 30(1), pp.1~10 (2018), 대한직업환경의학회[DOI]
- 이진숙, "3차원 가상착의와 실제착의를 통한 비만여성의 바지 맞음새 비교", 패션 비즈니스, 17(2), pp.33~45 (2013), 한국패션비즈니스학회[DOI]
- 신장희, "체형별 신체밀착형 Basic Bodice Block 설계 및 3차원 가상착의평가 - 20대 전반 여성을 중심으로 -", 한국의상디자인학회지, 15(2), pp.1~13 (2013), 한국의상디자인학회