무전해 Ni 도금법을 이용한 전자파 차폐용 도전성 EPDM 고무의 제조
Preparation of conductive EPDM rubber sheets by electroless Ni-plating for electromagnetic interference shielding applications
0
조회
0
다운로드
0
인용
0
참고문헌
초록
본 연구에서는 전자파 차폐형 MCT(multi cable transit)의 인서트블록에 사용되는 유연성 EPDM(ethylene propylene diene monomer)고무 상에 무전해 도금을 이용하여 니켈도금을 실시하였다. 도금욕의 공정변수 조절 즉 pH 및 온도에 따라 Ni 도금층의 결정성 및 부착력이 결정되었다. pH와 온도를 달리하여 합성 한 결과 pH 7 및 8, 60~70oC에서 얻은 도금막들에서 잘 발달된 결정상과 높은 전기 전도도를 가짐을 알 수 있었다. pH 7, 70oC에서 도금 시 가장 높은 부착력및 전기전도도를 얻을 수 있었으며, 또한 400 MHz~1 GHz 범위에서 우수한 전자파 차단능을 얻을 수 있었다.
Abstract
In the study, electroless Ni-plating on flexible ethylene-propylene-diene-monomer (EPDM) rubber sheets for the application of an insert block for shielding electromagnetic interference of multi cable transit (MCT) systems was investigated. Ni crystallinity and adhesion have been found to vary with processing parameters such as pH and temperature of the plating bath. It was shown that Ni-films having the high crystallinity and optimum electric conductivity were obtained on EPDM rubber sheets under pH 7 and 8 at 60~70oC. The conductive Ni-plated EPDM rubber prepared at pH 7 at 70oC showed the enhanced adhesion and electric conductivity, and the high electromagnetic interference shielding effect in the 400 MHz~1 GHz range.
참고문헌 (15)
- M. Stoppa, "Wearable electronics and smart textiles: a critical review", Sensors, 14, pp.11957~ (2014)
- N.C. Das, "Electromagnetic interference shielding effectiveness of carbon black and carbon fibre filled EVA and NR based composites", Composites, 31A, pp.1069~ (2000)
- K. Sasikumar, "Magnetoactive elastomeric composites: cure, tensile, electrical and magnetic properties", Bull. Mater. Sci, 29, pp.637~ (2006)
- 이세종, "생체모방 액츄에이터용 다중탄소나노튜브", 고분자 나노복합체, 2005, pp.15(3), 108~113[DOI]
- Roxtec multi-cable transit devices:applications and design practices, , Roxtec, ~ (2014)
- D.Y.W. Yu, "The yield strength of thin copper films on Kapton", J. Appl. Phys, 95, pp.2991~ (2004)
- S. Rosset, "Metal ion implantation for the fabrication of stretchable electrodes on elastomers", Adv. Funct. Mater, 19, pp.470~ (2009)
- S. Griehl, "Thick metallization-layers on polymers through vacuum-technology", J. Surf. Coat. Technol, 169, pp.24~ (2003)
- K. De Bruyn, "Study of pretreatment methods for vacuum metallization of plastics", Surf. Coat. Technol, 163, pp.710~ (2003)
- S. P. Lacour, "Stretchable interconnects for elastic electronic surfaces", Proc. IEEE 93, 93, pp.1459~ (2005)
- M. C. Zhang, "Electroless plating of copper and nickel on surface modified poly (tetrafluoroethylene) films", J. Electrochem. Soc, 148, pp.71~ (2001)
- D. Li, "Electroless copper deposition on aluminum-seeded ABS plastics", J. Mater. Sci, 43, pp.7121~ (2008)
- P. Dechasit, "Ni electroless plating of ABS polymer by palladium and tin-free process", J. Met. Mater. Miner, 21, pp.19~ (2011)
- 이병우, "무전해 니켈도금에 의한 도전성 실리콘고무 시트의 제조", 한국표면공학회지, 47(5), pp.269~274 (2014), 한국표면공학회[DOI]
- "IEEE Std. 299, IEEE standard method for measuring the effectiveness of electromagnetic shielding enclosure", ~ (1997)