FeCo 자성 금속 중공형 섬유 고분자 복합재의 전자파 차폐 특성 연구
Characterization of FeCo Magnetic Metal Hollow Fiber/EPDM Composites for Electromagnetic Interference Shielding
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
무전해 도금을 통해 제조한 FeCo 자성 금속 중공형 섬유와 EPDM 고분자를 이용하여 전자파 차폐 복합재를 제작하였다. 열처리 공정을 통하여 섬유의 종횡비를 제어하였으며 중공형 구조로 섬유를 제조한 후, 이를 EPDM 수지에 첨가하여 복합재를 제조하였다. 자성 금속 중공형 섬유의 종횡비가 클수록 낮은 표면 저항 특성과 우수한전자파 차폐 성능을 나타내었다. 약 100 μm 길이의 자성 금속 중공형 섬유를 이용한 두께 150 μm 전자파 차폐 복합재의 경우 밀도 1.18 g/cm3, 약 30 ohm/sq의 표면 저항, 그리고 30 dB의 전자파 차폐 성능을 나타내었다. 이는 종횡비가 큰 섬유에 의한 퍼콜레이션 임계치 이상의 전도성 네트워크 형성과 더불어, 낮은 표면 저항에 기인한 임피던스 차이에 의한 반사 손실 증가, 흡수 손실, 그리고 다중 내부 반사 손실에 의하여 우수한 전자파 차폐 성능을 나타내는 것으로 판단된다.
Abstract
Electromagnetic interference shielding composite with low density (1.18 g/cm3) was fabricated using electroless plated FeCo magnetic metal hollow fibers and ethylene propylene diene monomer (EPDM) polymer. Aspect ratio of the fibers were controlled and their hollow structure was obtained by heat treatment process. The FeCo hollow fibers were then mixed with EPDM to manufacture the composite. The higher aspect ratio of the magnetic metal hollow fibers resulted in high electromagnetic interference shielding effectiveness (30 dB) of the composite due to its low sheet resistance (30 ohm/sq). The enhanced electromagnetic interference shielding effectiveness was mainly attributed to the formation of conducting network over the percolation threshold by high aspect ratio of fibers as well as an increase of the reflection loss by impedance mismatch owing to low sheet resistance, absorption loss, and multiple internal reflections loss.
참고문헌 (22)
- Lee, S. E, "Effect of Fluorination of Carbon Nanotubes on Physico-chemical and EMI Shielding Properties of Polymer Composites", Polymer Korea, 39, pp.114~121 (2014)
- Chen, C. S, "Optimum Injection Molding Processing Condition on EMI Shielding Effectiveness of Stainless Steel Fiber Filled Polycarbonate Composite", International Communications in Heat and Mass Transfer, 35, pp.744~749 (2008)
- 홍명선, "무전해 니켈도금된 탄소섬유강화 에폭시기지 복합재료의 전자파 차폐특성", 공업화학, 22(6), pp.672~678 (2011), 한국공업화학회
- Al-Ghamdi, A.A, "New Electromagnetic Wave Shielding Effectiveness at Microwave Frequency of Polyvinyl Chloride Reinforced Graphite", Copper Nanoparticles, 2010, pp.41, 1693~1701
- Lu, N. N, "Electromagnetic Interference Shielding Effectiveness of Magnesium Alloy-Fly Ash Composites", Journal of Alloys and Compounds, 650, pp.871~877 (2015)
- Park, K. Y, "Application of MWNT-added Glass Fabric", Epoxy Composites to Electromagnetic Wave Shielding Enclosures, 2007, pp.81, 401~406
- Al-Saleh, M. H, "Electromagnetic Interference Shielding Mechanisms of CNT", Polymer Composites, 2009, pp.47, 1738~1746
- Rochon, P, "Strong Shielding due to an Electromagnetically Thin Metal Sheet", American Journal of Physics, 58, pp.276~ (1990)
- Bigg, D.M, "Plastic Composites for Electromagnetic Interference Shielding Applications", Polymer Composites, 4, pp.40~46 (1983)
- Stubhan, T, "High Fill Factor Polymer Solar Cells Comprising a Transparent, Low Temperature Solution Processed Doped Metal Oxide", Metal Nanowire Composite Electrode, 2012, pp.107, 248~251
- Silva, A. B, "Novel Composites of Copper Nanowire", PVDF with Superior Dielectric Properties, 2014, pp.55, 226~234
- Al-Saleh, M. H, "Copper Nanowire", Polystyrene Nanocomposites : Lower Percolation Threshold and Higher EMI Shielding, 2011, pp.42, 92~97
- Hu, M, "Flexible Transparent PES", Silver Nanowires, Langmuir, pp.2012, 28[DOI]
- Uysal, M, "The Preparation of Core-Shell Al2O3", Ni Composite Powders by Electroless Plating, 2013, pp.39, 5485~5493
- Dadvand, N, "Preparation and Characterization of Co–Fe–B Thin Films Produced by Electroless Deposition", Journal of Materials Science : Materials in Electronics, 19, pp.51~59 (2008)
- Meng, X, "Preparation of FeCo-, FeNi- and NiCo-Alloy Coated Cenosphere Composites by Heterogeneous Precipitation", Particuology, 10, pp.334~338 (2012)
- Wilson, L, "Decoration of Carbon Nanotubes with Iron–Cobalt(FeCo)Alloy using Polymer-Stabilization and Electroless Deposition Techniques for Thermotherapy Applications", Journal of Materials Chemistry, 22, pp.595~601 (2012)
- Yu, Y. H, "Enhanced Thermal and Mechanical Properties of Epoxy Composites Filled with Silver Nanowires and Nanoparticles", Journal of the Taiwan Insititute of Chemical Engineers, 44, pp.654~659 (2013)
- Qin, D. H, "Fine Magnetic Properties Obtained in FeCo Alloy Nanowire Arrays", Chemical Physics Letters, 358, pp.484~488 (2002)
- Mall, S, "Electromagnetic Interference and Electrical Conductivity Behavior of Carbon", Polycyanate Composite With Nickel NanostrandsTM Under Fatigue, 2011, pp.32, 483~490
- Lan, M, "Electromagnetic Shielding Effectiveness and Mechanical Property of Polymer– Matrix Composites Containing Metallized Conductive Porous Flake-Shaped Diatomite", Composites : Part B, 67, pp.132~137 (2014)
- 임윤지, "다중벽 탄소나노튜브강화 폴리프로필렌 나노복합재료의 전자파 차폐효과 및 기계적 특성", 폴리머, 36(4), pp.494~499 (2012), 한국고분자학회[DOI]