Design of reliability critical system using axiomatic design with FMECA
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In product design, the initial design stage is being increasingly emphasized because it significantly influences the successive product development and production stages. However, for larger and more complex products, it is very difficult to accurately predict product reliability in the initial design stage. Various design methodologies have been proposed to resolve this issue, but maintaining reliability while exploring design alternatives is yet to be achieved. Therefore, this paper proposes a methodology for conceptual design considering reliability issues that may arise in the successive detailed design stages. The methodology integrates the independency of axiomatic design and the hierarchical structure of failure mode, effects, and criticality analysis (FMECA), which is a technique widely used to analyze product reliability. We applied the proposed methodology to a liquefied natural gas fuel gas supply system to verify its effectiveness in the reliability improvement of the design process.
Abstract
In product design, the initial design stage is being increasingly emphasized because it significantly influences the successive product development and production stages. However, for larger and more complex products, it is very difficult to accurately predict product reliability in the initial design stage. Various design methodologies have been proposed to resolve this issue, but maintaining reliability while exploring design alternatives is yet to be achieved. Therefore, this paper proposes a methodology for conceptual design considering reliability issues that may arise in the successive detailed design stages. The methodology integrates the independency of axiomatic design and the hierarchical structure of failure mode, effects, and criticality analysis (FMECA), which is a technique widely used to analyze product reliability. We applied the proposed methodology to a liquefied natural gas fuel gas supply system to verify its effectiveness in the reliability improvement of the design process.
참고문헌 (28)
- Abdelkader, B., "A state of the art review of FMEA", FMECA, 1994, pp.1(4), 515~543
- Arcidiacono, G., "FMECA application to a continuous rolling machine for sole leather", International Conference on Engineering Design, 25 (1997)
- Arcidiacono, G., "Axiomatic design for reliability", ATA Mot. Car Eng. J, 53, pp.309~315 (2000)
- Arcidiacono, G., "The integration of reliability techniques as an aid to the design optimization of an earth moving machine", ASME International, Proceedings of International ME 2001 Congress and Exposition (2001)
- Arcidiacono, G., "Reliability improvement of a diesel engine using the FMETA approach", Qual. Reliab. Eng. Int, 20, pp.143~154 (2004)
- 안천헌, "FMECA 적용을 통한 벨트식 도어시스템 신뢰성 향상에 관한 연구", 한국철도학회논문집, 13(1), pp.58~64 (2010), 한국철도학회
- Chen, Z., "Study on integrating application method for AD and TRIZ", IFIP Int. Fed. Inf. Process, 207, pp.421~432 (2006)
- Goo, B. G., "A methodology to improve the reliability of the design: axiomatic design with FMECA", Proceedings of the Society of CAD, 2011, pp.1, 717~731
- 허균영, "INTERACTIVE SYSTEM DESIGN USING THE COMPLEMENTARITY OF AXIOMATIC DESIGN AND FAULT TREE ANALYSIS", Nuclear Engineering and Technology, 39(1), pp.51~62 (2007), 한국원자력학회
- "IEEE Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems, IEEE Std 352", The Institute of Electrical and Electronics, ~ (1987)
- Joseph, A., "A modified FMEA tool for use in identifying and addressing common cause failure risks in industry", Annu. Rel. Maint. Sym, 1, pp.19~24 (1999)
- Kulak, O., "Multi-attribute information technology project selection using fuzzy axiomatic design", J. Enterp. Inf. Manag, 18, pp.275~288 (2005)
- 이건상, "트리즈와 공리적 설계를 이용한 새로운 자전거용 자동변속장치의 개념설계에 대한 연구", 대한기계학회논문집 A, 33(03), pp.269~275 (2009), 대한기계학회
- Park, G. J., "Introduction to Mechanical Design" (2007), Dong-Myeong Press
- Pickard, K., "Multiple failure mode and effects analysis e an approach to risk assessment of multiple failures with FMEA", Rel. Maint. Sym, 1, pp.457~462 (2005)
- Rausand, M., "System Reliability Theory Models, Statistical Methods, and Applications" (2004), John Wiley & Sons, Inc
- Suh, N. P., "Axiomatic design theory for systems", Res. Eng. Des, 10, pp.189~209 (1998)
- Suh, N. P., "Principles of Design" (1990), Oxford University Press
- Seung, J. R., "Using cost based FMEA to enhance reliability and serviceability", Intell. Maint. Syst, 17, pp.179~188 (2003)
- 신광섭, "TRIZ를 도입한 공리적 설계방법에 의한 레이저 마커의 빔 분해기 개념설계", 한국정밀공학회지, 21(5), pp.166~173 (2004), 한국정밀공학회
- 박경진, "공리적 설계에서 트리즈를 이용한 연성설계의 비연성화 과정", 대한기계학회논문집 A, 31(1), pp.77~88 (2007), 대한기계학회
- Shirwaiker, R., "Triz and axiomatic design : a review of case-studies and a proposed synergistic use", J. Intell. Manuf, 19, pp.33~47 (2008)
- Seo, S.W., "A Pump-free Pressure Boosting System for LNG Fuel Gas Supply System", MS, Dept. of Mechanical Engineering, pp.2012
- Seo, S. W., "An economic evaluation of operating expenditures for LNG fuel gas supply systems onboard", Ships Offshore Struct, 11(2), pp.213~223 (2014)
- Telsang, M., "Industrial Engineering and Production Management" (2006), S Chand &Co Ltd
- Wuersig, G. M., "LNG as Ship Fuel" (2014), DNV GL
- Yang, K., "A comparison of TRIZ and axiomatic design", First International Conference on Axiomatic Design, 1, pp.235~242 (2000)
- Zigmund, B., "Bouncing failure analysis(BFA) : the unified FTA-FMEA methodology", Annu. Rel. Maint. Sym, 1, pp.463~467 (2005)