A CAD/CAM-based strategy for concurrent endodontic and restorative treatment
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/ CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.
Abstract
This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/ CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.
참고문헌 (45)
- Pratt I, "Eight-year retrospective study of the critical time lapse between root canal completion and crown placement : its influence on the survival of endodontically treated teeth", J Endod, 42, pp.1598~1603 (2016)
- Ricucci D, "Recurrent apical periodontitis and late endodontic treatment failure related to coronal leakage : a case report", J Endod, 37, pp.1171~1175 (2011)
- Rocca GT, "Crown and post-free adhesive restorations for endodontically treated posterior teeth : from direct composite to endocrowns", Eur J Esthet Dent, 8, pp.156~179 (2013)
- Marzouk MA, "Designs of cavity and tooth preparations for cast restorations. Operative dentistry, modern theory and practice", pp.1~326 (1997), All India Publishers and Distributors
- Kollmuss M, "Comparison of chairside and laboratory CAD", CAM to conventional produced all-ceramic crowns regarding morphology, occlusion, and aesthetics, 2016, pp.20, 791~797
- Blatz MB, "The effect of resin bonding on long-term success of high-strength ceramics", J Dent Res, 97, pp.132~139 (2018)
- Benk J, "Conservative restorative treatment using a single-visit, all-ceramic CAD", CAM system, 2007, pp.19, 35~40
- Vafiadis D, "Single visit fabrication of a porcelain laminate veneer with CAD", CAM technology : a clinical report, 2011, pp.106, 71~73
- Mörmann WH, "The Cerec system : computer-assisted preparation of direct ceramic inlays in 1 setting", Quintessenz, 38, pp.457~470 (1987)
- Li RW, "Ceramic dental biomaterials and CAD", CAM technology : state of the art, 2014, pp.58, 208~216
- Goujat A, "Mechanical properties and internal fit of 4 CAD-CAM block materials", J Prosthet Dent, 119, pp.384~389 (2018)
- Manfredi M, "Single versus multiple visits for endodontic treatment of permanent teeth", Cochrane Database Syst Rev, 12, pp.CD005296~ (2016)
- Yee K, "survival rates of teeth with primary endodontic treatment after core", post and crown placement, 2018, pp.44, 220~225
- Gesi A, "Incidence of periapical lesions and clinical symptoms after pulpectomy--a clinical and radiographic evaluation of 1-versus 2-session treatment", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 101, pp.379~388 (2006)
- Pimentel Corrêa AC, "Sodium thiosulfate for recovery of bond strength to dentin treated with sodium hypochlorite", J Endod, 42, pp.284~288 (2016)
- Chandrashekhar S, "A comparative evaluation of shear bond strength of composite resin to pulp chamber dentin treated with sodium thiosulfate and proanthocyanidin : an in vitro study", J Conserv Dent, 21, pp.671~675 (2018)
- Khullar P, "A survey report on effect of root canal fillings and coronal restorations on the periapical status of endodontically treated teeth in a selected group of population", Int J Clin Pediatr Dent, 6, pp.89~94 (2013)
- Siqueira JF Jr, "Aetiology of root canal treatment failure : why well-treated teeth can fail", Int Endod J, 34, pp.1~10 (2001)
- Vire DE, "Failure of endodontically treated teeth : classification and evaluation", J Endod, 17, pp.338~342 (1991)
- Landys Borén D, "Long-term survival of endodontically treated teeth at a public dental specialist clinic", J Endod, 41, pp.176~181 (2015)
- Schmalz G, "Effect of dimension of luting space and luting composite on marginal adaptation of a class II ceramic inlay", J Prosthet Dent, 73, pp.392~399 (1995)
- van Dijken JW, "Marginal breakdown of 5-year-old direct composite inlays", J Dent, 24, pp.389~394 (1996)
- Southard DW, "Immediate core buildup of endodontically treated teeth : the rest of the seal", Pract Periodontics Aesthet Dent, 11, pp.519~526 (1999)
- Goldfein J, "Rubber dam use during post placement influences the success of root canal-treated teeth", J Endod, 39, pp.1481~1484 (2013)
- Yadav K, "Endodontic management of a mandibular first molar with radix entomolaris and conservative post-endodontic restoration with CAD", CAM onlay: a novel clinical technique, 2016, pp.10, ZD13~ZD15
- Siqueira JF, "Biological principles of endodontic treatment of teeth with vital pulp", Rev Bras Odontol, 68, pp.161~165 (2011)
- Buonocore MG, "A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", J Dent Res, 34, pp.849~853 (1955)
- Pasqualini D, "Micro-computed tomography evaluation of ProTaper Next and BioRaCe shaping outcomes in maxillary first molar curved canals", J Endod, 41, pp.1706~1710 (2015)
- da Silva Limoeiro AG, "Micro-computed tomographic evaluation of 2 nickel-titanium instrument systems in shaping root canals", J Endod, 42, pp.496~499 (2016)
- Weine F, "Endodontic therapy", pp.209~222 (1972), C.V. Mosby
- Albrecht LJ, "Evaluation of apical debris removal using various sizes and tapers of ProFile GT files", J Endod, 30, pp.425~428 (2004)
- de Azevedo Cubas GB, "The effect of luting agents and ceramic thickness on the color variation of different ceramics against a chromatic background", Eur J Dent, 5, pp.245~252 (2011)
- Murgueitio R, "Three-year clinical follow-up of posterior teeth restored with leucite-reinforced ips empress onlays and partial veneer crowns", J Prosthodont, 21, pp.340~345 (2012)
- Huth KC, "Clinical study of indirect composite resin inlays in posterior stress-bearing cavities placed by dental students : results after 4 years", J Dent, 39, pp.478~488 (2011)
- Sahafi A, "Effect of surface treatment of prefabricated posts on bonding of resin cement", Oper Dent, 29, pp.60~68 (2004)
- Dalpino PH, "Fracture resistance of teeth directly and indirectly restored with composite resin and indirectly restored with ceramic materials", Am J Dent, 15, pp.389~394 (2002)
- Tyas MJ, "Minimal intervention dentistry--a review. FDI commission project 1-97", Int Dent J, 50, pp.1~12 (2000)
- Tian T, "Evaluation of microtensile bond strength on ceramic-resin adhesion using two specimen testing substrates", Int J Adhes Adhes, 54, pp.165~171 (2014)
- Sandoval MJ, "In vitro evaluation of marginal and internal adaptation of class II CAD", CAM ceramic restorations with different resinous bases and interface treatments, 2015, pp.19, 2167~2177
- Arrais CA, "Micromorphology of resin", dentin interfaces using 4th and 5th generation dual-curing adhesive, J Adhes Dent, pp.2009, 11[DOI]
- Carvalho AO, "Influence of adhesive core buildup designs on the resistance of endodontically treated molars restored with lithium disilicate CAD", CAM crowns, 2016, pp.41, 76~82
- Teruya JI, "Odontopediatria na primeira infância", pp.413~429 (2001), Santos
- Ernest CP, "In vitro shear bond strength of self-etching adhesives in comparison to 4th and 5th generation adhesives", J Adhes Dent, 6, pp.293~299 (2004)
- Radovic I, "Self-adhesive resin cements : a literature review", J Adhes Dent, 10, pp.251~258 (2008)
- Ferracane JL, "Self-adhesive resin cements-chemistry, properties and clinical considerations", J Oral Rehabil, 38, pp.295~314 (2011)