Control of surface defects on plasma-MIG hybrid welds in cryogenic aluminum alloys
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Lately, high production rate welding processes for Al alloys, which are used as LNG FPSO cargo containment system material, have been developed to overcome the limit of installation and high rework rates. In particular, plasma-metal inert gas (MIG) hybrid (PMH) welding can be used to obtain a higher deposition rate and lower porosity, while facilitating a cleaning effect by preheating and post heating the wire and the base metal. However, an asymmetric undercut and a black-colored deposit are created on the surface of PMH weld in Al alloys. For controlling the surface defect formation, the wire feeding speed and nozzle diameter in the PMH weld was investigated through arc phenomena with high-speed imaging and metallurgical analysis.
Abstract
Lately, high production rate welding processes for Al alloys, which are used as LNG FPSO cargo containment system material, have been developed to overcome the limit of installation and high rework rates. In particular, plasma-metal inert gas (MIG) hybrid (PMH) welding can be used to obtain a higher deposition rate and lower porosity, while facilitating a cleaning effect by preheating and post heating the wire and the base metal. However, an asymmetric undercut and a black-colored deposit are created on the surface of PMH weld in Al alloys. For controlling the surface defect formation, the wire feeding speed and nozzle diameter in the PMH weld was investigated through arc phenomena with high-speed imaging and metallurgical analysis.
참고문헌 (17)
- Kim, S. J., "A benchmark study on ultimate strength analysis methods of ship stiffened panel", 석사, pp.2012
- Lee, J. C., "Development of framework for NRSM based optimal shape design", Proceedings of KIIS Spring Conference 2013, 23(1), pp.3~4 (2013)
- 이재철, "신경반응표면을 이용한 공학 구조물 설계 프레임워크구축 및 검증에 관한 연구", 한국지능시스템학회 논문지, 24(1), pp.46~51 (2014), 한국지능시스템학회
- Lee, J. C., "A study on prediction method for added resistance in waves using the Genetic Programming", roceedings of the Annual Autumn Conference, Changwon, pp.482~490 (2014)
- Sukomal Mandal, "Damage level prediction of non-reshaped berm breakwater using ANN, SVM and ANFIS models", International Journal of Naval Architecture and Ocean Engineering, 4(2), pp.112~122 (2012), 대한조선학회[DOI]
- Mayers, R. H., "Response surface methodology – process and product optimization using Designed experiments" (1995), John Wiley & Sons
- Pail, J. K., "Ultimate limit state design of steel-plated structures" (2003), John Wiley&Sons
- Robert, H. N., "Theory of the back-propagation neural network", International Joint Conference, 1, pp.593~605 (1989)
- Ross, P. J., "Taguchi techniques for quality engineering. 2nd" (1996), McGraw-Hill Professional Publishing
- 신성철, "뉴로퍼지시스템에 의한 반류분포 추정에 관한 연구", 한국지능시스템학회 논문지, 17(2), pp.154~159 (2007), 한국지능시스템학회
- Yang, H., "Dynamic reliability based design optimisation of the tripod sub-structure of offshore wind turbines", Renewable Energy, 78, pp.16~25 (2015)
- Yu, L., "A response surface approach to fatigue reliability of ship structures", Ships and Offshore Structures, 4(3), pp.253~259 (2009)
- Schnick, M., "Simulation of plasma and shielding gas flows in welding and cutting arcs with ansys CFX", International Scientific Colloquium on ‘Modelling for Material Processing’, Riga, Latvia, pp.143~148 (2006)
- Tanaka, M., "Visualization of metal vapor behavior in TIG welding : Visualization of phenomena of welding arc by imaging spectroscopy", Quarterly Journal of the Japan Welding Society, 30(2), pp.164~170 (2012)
- Ton, H., "Physical properties of the plasma-MIG welding arc", Journal of Physics D : Applied Physics, 8, pp.922~933 (1975)
- Woods, R. A., "Metal transfer in aluminum alloys", Welding Journal, pp.59-s~66-s (1980)
- Youn, K. H., "Gas metal arc welding of aluminum alloy(in Korean)", Journal of KJWS, 12(1), pp.16~27 (1994)