Probabilistic estimates of corrosion rate of fuel tank structures of aging bulk carriers
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper considers corrosion wastage of two ship hull structure members as a part of investigated fuel oil tanks of 25 aging bulk carriers. Taking into account that many factors which influence corrosion wastage of ship hull structures are of uncertain nature, the related corrosion rate (c1) is considered here as a real-valued continuous distribution, assuming that the corrosion wastage starts after 5, 6 or 7 years. In all considered cases, by using available data and applying three basic statistical tests, it is established that between two-parameter continuous distributions, normal,Weibull and logistic distributions are best fitted distributions for the mentioned corrosion rate (c1). Note that the presented statistical, numerical and graphical results concerning two mentioned ship hull structure members allow to compare and discuss the corresponding probabilistic estimates for the corrosion rate (c1).
Abstract
This paper considers corrosion wastage of two ship hull structure members as a part of investigated fuel oil tanks of 25 aging bulk carriers. Taking into account that many factors which influence corrosion wastage of ship hull structures are of uncertain nature, the related corrosion rate (c1) is considered here as a real-valued continuous distribution, assuming that the corrosion wastage starts after 5, 6 or 7 years. In all considered cases, by using available data and applying three basic statistical tests, it is established that between two-parameter continuous distributions, normal,Weibull and logistic distributions are best fitted distributions for the mentioned corrosion rate (c1). Note that the presented statistical, numerical and graphical results concerning two mentioned ship hull structure members allow to compare and discuss the corresponding probabilistic estimates for the corrosion rate (c1).
참고문헌 (28)
- Gardiner, C. P., "Corrosion Analysis of Bulk Carriers", PhD, pp.1999
- Gardiner, C. P., "Corrosion analysis of bulk carriers, Part I : operational parameters influencing corrosion rates", Mar. Struct, 16, pp.547~566 (2003)
- Gudze, M. T., "Operational based corrosion analysis in naval ships", Corrosion Sci, 50(12), pp.3296~3307 (2008)
- Gudze, M. T., "Prediction of naval ship ballast tank corrosion using operational profiles", Int. J. Marit. Eng, 148(Part A3), pp.148~ (2006)
- Guedes Soares, C., "Reliability of maintained ship hulls subjected to corrosion", J. Ship Res, 40(3), pp.235~243 (1996)
- Guedes Soares, C., "Reliability of maintained ship hull girders subjected to corrosion and fatigue", Struct. Saf, 20, pp.201~219 (1998)
- Guedes Soares, C., "Structural Safety and Reliability, vol. 3", pp.2013~2020 (1998), Balkema
- Guedes Soares, C., "Reliability of maintained ship hulls subjected to corrosion and fatigue under combined loading", J. Constr. Steel Res, 52, pp.93~115 (1999)
- Guedes Soares, C., "Effect of environmental factors on steel plate corrosion under marine immersion conditions, Corrosion Engineering", Sci. Technol, 46, pp.524~541 (2011)
- Ivosevic, S., "Maritime Faculty Kotor, Kotor, Montenegro", PhD, pp.2012
- Ivosevic, S., "An approach to the probabilistic corrosion rate estimation model for inner bottom plates of bulk carriers", Brodogradnja, 2017, pp.68(4), 57~70
- Jurisic, P., "Comparative analysis based on two nonlinear corrosion models commonly used for prediction of structural degradation of oil tankers", Trans. FAMENA, 38(2), pp.21~30 (2014)
- Jurisic, P., "Aging effects on ship structural integrity", Brodogradnja, 68(2), pp.15~28 (2017)
- Melchers, R. E., "Probabilistic model for marine corrosion of steel for structural reliability assessment", J. Struct. Eng, 129(11), pp.1484~1493 (2003)
- Paik, J. K., "Corrosion analysis of seawater ballast tank structures", Int. J. Marit. Eng, 146(Part A1), pp.1~12 (2004)
- Paik, J. K., "Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers", Ocean Eng, 25(10), pp.837~860 (1998)
- Paik, J. K., "A time-dependent corrosion wastage model for seawater ballast tank structures of ships", Corrosion Sci, 46(2), pp.471~486 (2004)
- Paik, J. K., "Time-variant ultimate longitudinal strength of corroded bulk carriers", Mar. Struct, 16, pp.567~600 (2003)
- Paik, J. K., "Ultimate strength of aging ships", J. Eng. Marit. Environ, 1(1), pp.57~77 (2002)
- Paik, J. K., "A time-dependent corrosion wastage model for bulk Carrier structures", Int. J. Marit. Eng, 145(Part A2), pp.61~87 (2003)
- Paik, J. K., "Time-dependent risk assessment of aging ships accounting for general", pit corrosion, fatigue cracking and local denting damage, 2003, pp.111, 159~197
- Evaluation of Corrosion Damage in Crude and Product Carriers, "Pollard, R. R.", Department of Naval Architecture & Offshore Engineering, University of California, 67~, pp.Report No. SMP-I (1991)
- Qin, S., "Effect of corrosion models on the time-dependent reliability of steel plated elements", Mar. Struct, 16, pp.15~34 (2003)
- RINA, "Guide for the Structural Design of Oil Tankers", Registro Italiano Navale, ~ (2004)
- Venkatesan, R., "Studies on Corrosion of Some Structural Materials in Deep Sea Environment", pp.2000
- Influence of Corrosion on Ship Structural Performance, "Viner, A. C.", Lloyd’s Register of Shipping, ~, pp.Hull New Construction Division No. 85 (1985), 29
- Yamamoto, N., "study on the degradation of coating and corrosion of ship's hull based on the probabilistic approach", Proceedings of the International Offshore Mechanics and Arctic Engineering Symposium (OMAE’96), 2, pp.159~166 (1996)
- Yamamoto, N., "Effect of corrosion and its protection on hull strength(2nd report)", J. Soc. Nav. Archit. Jpn, 176, pp.281~289 (1994)