Comparative analysis among deterministic and stochastic collision damage models for oil tanker and bulk carrier reliability

키워드

참고문헌 (48)

1. ABS, "Guide for Assessing Hull-Girder Residual Strength for Tankers" (1995)
2. ABS, "Guide for Assessing Hull-Girder Residual Strength for Bulk Carriers" (1995)
3. Alie, M.Z.M., "Residual longitudinal strength analysis of ship's hull girder with damages", Proceedings of the 22nd International Offshore and Polar Engineering Conference ISOPE 2012, pp.831~838 (2012)
4. Amlashi, H.K.K., "Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition - a case study Part 1: nonlinear finite element modelling and ultimate hull girder capacity", Mar. Struct., 21, pp.327~352 (2008)[DOI]
5. Ashman, K.M., "Detecting bimodality in astronomical datasets", Astron. J., 108, pp.2348~2361 (1994)[DOI]
6. Campanile, A., "On the exact solution of non-uniform torsion for beams with asymmetric cross section", World Acad. Sci. Eng. Technol., 31, pp.46~53 (2009)
7. Campanile, A., "On the influence of the warping shear stress on the hull girder strength", J. Sh. Res., 54(4), pp.231~243 (2010)
8. Campanile, A., "Statistical properties of bulk-carrier longitudinal strength", Mar. Struct., 39, pp.438~462 (2014)[DOI]
9. Campanile, A., "Statistical properties of bulk-carrier residual strength", Ocean Eng., 106, pp.47~67 (2015)[DOI]
10. Campanile, A., "Time-variant bulk carrier reliability analysis in pure bending intact and damage conditions", Mar. Struct., 46, pp.193~228 (2016)[DOI]
11. Campanile, A., "Incidence of residual stresses and steel properties variability on corroded bulk carrier reliability", Ocean Eng., 128, pp.58~80 (2016)[DOI]
12. Choung, J., "Assessment of residual strength of an asymmetrically damaged tanker considering rotational and translational shifts of neutral axis plane", Mar. Struct., 25, pp.71~84 (2012)
13. 정준모, "Residual ultimate strength of a very large crude carrier considering probabilistic damage extents", International Journal of Naval Architecture and Ocean Engineering, 6(1), pp.14~26 (2014), 대한조선학회
14. CSA - Direct Analysis of Ship Structures. Classification Notes 2011: 34.1, "DNV", ~ (2011)
15. Egge, E.D., "Calculation of the collision resistance of ships and its assessment for classification purposes", Mar. Struct., 4(1), pp.35~56 (1991)[DOI]
16. Fang, C., "Survivability and reliability of damage ships after collision and grounding", Ocean Eng., 32, pp.293~307 (2005)[DOI]
17. Fjeld, S., "Reliability of offshore structures", J. Pet. Technol., 30(10), pp.1486~1496 (1978)[DOI]
18. Graham, U., "Understanding Statistics" (1996), Oxford University Press
19. Guedes Soares, C., "Reliability based ship structural design", Trans. Soc. Nav. Archit. Mar. Eng. - SNAME, 104, pp.357~389 (1996)
20. Hart, D.K., "Structural reliability analysis of stiffened panels", RINA Trans., 128, pp.293~310 (1985)
21. Horte, T., "Calibration of the hull girder ultimate capacity criterion for double hull tankers", Proceedings of the 10th International Symposium on Practical Design of Ships and Other Floating Structures, pp.235~246 (2007)
22. Hussein, A.W., "Reliability and residual strength of double hull tankers designed according to the new IACS common structural rules", Ocean Eng., 36, pp.1446~1459 (2009)[DOI]
23. IACS, "Common Structural Rules for Bulk Carriers and Oil Tankers" (2015)
24. Technical Report for CSR-H External Release on 2014-06-01, "IACS", International Association of Classification Societies, ~ (2015)
25. IMO, "Regulations on Subdivision and Stability of Passenger Ships as an Equivalent to Part B of Chapter II of the International Convention for the Safety of Life at Sea, 1960. Resolution A.265(VIII)", ~ (1973)
26. IMO, "Interim Guidelines for Approval of Alternative Methods of Design and Construction of Oil Tankers under Regulation 13F(5) of Annex I of Marpol 73", 78. Resolution MEPC.66(37), 1995
27. IMO, "Revised Interim Guidelines for Approval of Alternative Methods of Design and Construction of Oil Tankers under Regulation 13F(5) of Annex I of Marpol 73", 78. Resolution MEPC.110(49), 2003
28. IMO, "International Convention for the Safety of Life at Sea, 2009" (2009)
29. Revision of the Damage Stability Regulations for ro-ro Passenger Ships. SLF55, "INF.7 Sub-Committee on Stability and Load Lines and on Fishing Vessels Safety", IMO, 2012
30. ISSC, "ISSC Committee VI.2: Ultimate Strength", 14th International Ship and Offshore Structures Congress (2000)
31. ISSC., "ISSC Committee III.1: Ultimate Strength", 18th international ship and offshore structures congress (2012)
32. Ivanov, L.D., "Statistical evaluation of the ship's hull cross section geometrical characteristics as a function of her age", Int. Shipbuild. Prog., 33(387), pp.198~203 (1986)
33. 김도균, "Comparison of residual strength-grounding damage index diagrams for tankers produced by the ALPS", HULL ISFEM and design formula method, 2013, pp.5(1), 47~61[DOI]
34. 김도균, "Ultimate strength performance of tankers associated with industry corrosion addition practices", International Journal of Naval Architecture and Ocean Engineering, 6(3), pp.507~528 (2014), 대한조선학회
35. Mansour, A.E., "Probability-based ship structural safety analysis", J. Sh. Res., 38(4), pp.329~339 (1994)
36. MathWorks, "Matlab User Guide R2014b" (2014)
37. Ozguc, O., "Analysis on the hull girder ultimate strength of a bulk carrier using simplified method based on an incremental-iterative approach", J. Offshore Mech. Arct. Eng., 130(2) (2008)
38. Paik, J.K., "Residual strength assessment of ships after collision and grounding", Mar. Technol., 35, pp.38~54 (1998)
39. Paik, J.K., "Ship structural safety and reliability", Prog. Struct. Eng. Mater., 3, pp.198~210 (2001)[DOI]
40. Saydam, D., "Performance assessment of damage ship hulls", Ocean Eng., 68, pp.65~76 (2013)[DOI]
41. Smith, M.J., "Automated assessment of ultimate hull girder strength", J. Offshore Mech. Arct. Eng., 125(3) (2003)
42. Sorensen, J.D., "Notes in Structural Reliability Theory and Risk Analysis" (2004)
43. Sprinthall, R.C., "Basic Statistical Analysis" (2011), Pearson Education Group
44. Teixeira, A., "Reliability of Marine Structures in the Context of Risk Based Design", pp.1997
45. VanDerHorn, E., "A statistical study on the material properties of shipbuilding steels", Proceedings of the 14th International Congress of the International Maritime Association of the Mediterranean, pp.371~378 (2011)
46. Vhanmane, S., "Ultimate strength analysis of ship hull girder under random material and geometric properties", J. Offshore Mech. Arct. Eng., 133(3) (2011)
47. Wirsching, P.H., "Reliability with respect to ultimate strength of a corroding ship hull", Mar. Struct., 10, pp.501~518 (1997)[DOI]
48. Zhu, B., "Reliability assessment of ship structures using Bayesian updating", Eng. Struct., 56, pp.1836~1847 (2013)[DOI]

관련 논문AI추천