An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part II = Application to the ship’s ballast tank

키워드

참고문헌 (48)

1. Bai, Y., "Time-dependent reliability assessment of offshore jacket platforms", Ships Offshore Struct, 11(6), pp.591~602 (2016)
2. Chernov, B. B., "Predicting the corrosion of steels in seawater from its physiochemical characteristics", Protect. Met, 26(2), pp.238~241 (1990)
3. Chernov, B. B., "Physiochemical modelling of metal corrosion in seawater", Protect. Met, 27(5), pp.612~615 (1991)
4. Jinju Cui, "Case studies on the probabilistic characteristics of ultimate strength of stiffened panels with uniform and non-uniform localized corrosion subjected to uniaxial and biaxial thrust", International Journal of Naval Architecture and Ocean Engineering, 11(1), pp.97~118 (2019), 대한조선학회[DOI]
5. Garbatov, Y., "Corrosion wastage modeling of deteriorated ship structures", Int. Shipbuild. Prog, 55, pp.109~125 (2008)
6. Garbatov, Y., "Spatial corrosion wastage modelling of steel plates subjected to marine environments", The 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2017) (2017)
7. Garbatov, Y., "Non-linear time dependent corrosion wastage of deck plates of ballast and cargo tanks of tankers", J. Offshore Mech. Arctic Eng, 129, pp.48~55 (2007)
8. Guedes Soares, C, "Safety and Reliability" (1998)
9. Guedes Soares, C., "Non-linear corrosion model for immersed steel plates accounting for environmental factors", Trans. -Soc. Nav. Archit. Mar. Eng, 111, pp.194~211 (2005)
10. Guedes Soares, C., "Corrosion wastage model for ship crude oil tanks", Corrosion Sci, 50(11), pp.3095~3106 (2008)
11. Report of the Maritime Safety Committee on its Eighty-Seventh Session, "IMO", Maritime Safety Committee. International Maritime Organization, ~, pp.MSC 87 (2010), 26
12. IMO, "International Goal-Based Ship Construction Standards for Bulk Carriers and Oil Tankers", International Maritime Organization, ~ (2015)
13. Kim, H. C., "Korea’s Ship - Chapter 16: Design Life of Ship and Prospect of Technology Development" (2010), Jisungsa Publisher
14. Kim, D. K., "Ultimate strength performance of bulk carriers with various corrosion additions", Ships Offshore Struct, 10(1), pp.59~78 (2015)
15. Kim, D. K., "Time-dependent corrosion damage on the development of residual strength-grounding damage index diagram", Ocean Eng, 76, pp.163~171 (2014)
16. 김도균, "Ultimate strength performance of tankers associated with industry corrosion addition practices", International Journal of Naval Architecture and Ocean Engineering, 6(3), pp.507~528 (2014), 대한조선학회
17. Kim, D. K., "Ultimate strength prediction of T-bar stiffened panel under longitudinal compression by data processing : A refined empirical formulation", Ocean Eng, 192, pp.106522~ (2019)
18. Kim, D. K., "The necessity of applying the common corrosion addition rule to container ships in terms of ultimate longitudinal strength", Ocean Eng, 49, pp.43~55 (2012)
19. 김도균, "Effect of corrosion on the ultimate strength of double hull oil tankers – Part I: stiffened panels", Structural Engineering and Mechanics, An Int＇l Journal, 42(4), pp.507~530 (2012), 국제구조공학회[DOI]
20. 김도균, "Effect of corrosion on the ultimate strength of double hull oil tankers – Part II: hull girders", Structural Engineering and Mechanics, An Int＇l Journal, 42(4), pp.531~549 (2012), 국제구조공학회[DOI]
21. Kim, D. K., "An advanced technique to predict timedependent corrosion damage of onshore, offshore, nearshore and ship structures : Part I = Generalisation", Int. J. Nav. Architect. Ocean Eng (2020)
22. Kim, D. K., "A method for empirical formulation of current profile", Ships Offshore Struct, 14(2), pp.176~192 (2019)
23. Kim, D. K., "Safety assessment of corroded jacket platform considering decommissioning event", Int. J. Automot. Mech. Eng, 14(3), pp.4462~4485 (2017)
24. Melchers, R. E., "Probabilistic modelling of immersion corrosion of steels in marine waters", The 20th International Conference on Offshore Mechanics and Arctic Engineering Conference (OMAE 2001) (2001)
25. Melchers, R. E., "Mathematical modelling of the diffusion controlled phase in marine immersion corrosion of mild steel", Corrosion Sci, 45(5), pp.923~940 (2003)
26. Melchers, R. E., "Modeling of marine immersion corrosion for mild and low alloy steels-Part 1 : phenomenological model", Corrosion(NACE), 59(4), pp.319~334 (2003)
27. Melchers, R. E., "Modeling and prediction of long-term corrosion of steel in marine environments", Int. J. Offshore Polar Eng, 22, pp.257~263 (2012)
28. Melchers, R. E., "A conceptual model for the interaction between carbon content and manganese sulphide inclusions in the short-term seawater corrosion of low carbon steel", Metals, 6(6), pp.1~13 (2016)
29. Mohd Hairil, M., "A time-variant corrosionwastage model for subsea gas pipelines", Ships Offshore Struct, 9(2), pp.161~176 (2014)
30. Mohd Hairil, M., "On the burst strength capacity of an aging subsea gas pipeline", J. Offshore Mech. Arctic Eng, 136(4), pp.1~7 (2014)
31. Mohd Hairil, M., "Investigation of the corrosion progress characteristics of offshore subsea oil well tubes", Corrosion Sci, 67, pp.130~141 (2013)
32. Ozguc, O., "Conversion of an oil tanker into FPSO in Gulf of Mexico: strength and fatigue assessment", Ships Offshore Struct (2020)[DOI]
33. Paik, J. K., "Advanced method for the development of an empirical model to predict time-dependent corrosion wastage", Corrosion Sci, 63, pp.51~58 (2012)
34. Paik, J. K., "Ultimate strength performance of Suezmax tanker structures: pre-CSR versus CSR designs", Int. J. Maritime Eng, 151(Part A2), pp.39~58 (2009)
35. Paik, J. K., "A time-dependent corrosion wastage model for the structures of single-and double-hull tankers and FSOs and FPSOs", Mar. Technol, 40(3), pp.201~217 (2003)
36. Paik, J. K., "Condition Assessment of Aged Structures" (2008), CRC Press
37. Paik, J. K., "A time-dependent corrosion wastage model for seawater ballast tank structures of ships", Corrosion Sci, 46(2), pp.471~486 (2004)
38. Paik, J. K., "A time-dependent corrosion wastage model for bulk carrier structures", Int. J. Maritime Eng, 145(A2), pp.61~87 (2003)
39. Petersen, R. B., "Model for the long-term corrosion of cast iron pipes buried in soil", The 5th International Symposium on Life-Cycle Engineering (IALCCE 2016) (2016)
40. Ahmad Rahbar-Ranji, "Ultimate strength of stiffened plates with pitting corrosion", International Journal of Naval Architecture and Ocean Engineering, 7(3), pp.509~525 (2015), 대한조선학회
41. Rajput, A., "Fresh and sea water immersion corrosion testing on marine structural steel at low temperature", Ships Offshore Struct (2019)[DOI]
42. Ringsberg, J. W., "Reduction in ultimate strength capacity of corroded ships involved in collision accidents", Ships Offshore Struct, 13(Sub 1), pp.155~166 (2018)
43. Wang, Y, "Assessing the performances of elastic-plastic buckling and shell-solid combination in finite element analysis on plated structures with and without idealised corrosion defects", Thin-Walled Struct, 127, pp.17~30 (2018)
44. Wang, R., "Experimental and numerical study of localized pitting effect on compressive behavior of tubular members", Mar. Struct, 72, pp.102784~ (2020)
45. Wang, R., "Compressive strength of tubular members with localized pitting damage considering variation of corrosion features", Mar. Struct, 73, pp.102805~ (2020)
46. Wong, E. W. C., "A simplified method to predict fatigue damage of TTR subjected to shortterm VIV using artificial neural network", Advances in Engineering Software, 126, pp.100~109 (2018)
47. Yamamoto, N., "A study on the degradation of coating and corrosion of ship’s hull based on the probabilistic approach", J. Offshore Mech. Arctic Eng, 120(3), pp.121~128 (1998)
48. Yang, H. Q., "A study on time-variant corrosion model for immersed steel plate elements considering the effect of mechanical stress", Ocean Eng, 125, pp.134~146 (2016)