KCS용 벌브형 비대칭 타의 최적화에 대한 수치적 성능 연구
Numerical Study on Optimization of Bulb Type Twisted Rudder for KCS
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of 5°, and an asymmetric rudder bulb with a bulb diameter of 1.2H_H /1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.
Abstract
Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of 5°, and an asymmetric rudder bulb with a bulb diameter of 1.2H_H /1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.
참고문헌 (11)
- Carlton, J., "Marine Propellers and Propulsion" (1994), Butterworth-Heinemann
- Cha, K.J, "Design of Twisted Rudder with Bulb and Fin for KCS", Master, Naval Architecture and Ocean Engineering, pp.2017
- Heo, D.H, "Resistance and Propulsion Performance Comparison of Semi Spade Rudder and Asymmetric Full Spade Rudder by Numerical and Experimental Method", Master, Naval Architecture and Ocean Engineering, pp.2017
- 김인환, "대형 컨테이너선용 Twist 일체형 타 개발", 대한조선학회 논문집, 46(5), pp.479~487 (2009), 대한조선학회
- 김정현, "Twisted rudder for reducing fuel-oil consumption", International Journal of Naval Architecture and Ocean Engineering, 6(3), pp.715~722 (2014), 대한조선학회
- Kwon, J.I, "A Study on the Biased Asymmetric Pre-swirl Stator For a Container Ship", Master, Naval Architecture and Ocean Engineering, pp.2013
- Mewis, F., "Power-and Cost-Savings for Container Vessels by Hydrodynamic Energy Saving Devices", Proceedings of the 4th International Ship Efficiency Conference (2013)
- Nielsen, J. R., "Combined Kappel Propeller and Rudder Bulb System For Improved Propulsion Efficiency", Proceedings of the 34th Motorship Propulsion & Future Fuels Conference (2012)
- Okada, Y., "The development of 'Ultimate Rudder' for EEDI", Proceedings of International Conference on Computational Methods in Marine Engineering (2015)
- Shin, K. W., "CFD-Based Optimization of Rudder Bulb Systems", Proceedings of World Maritime Technology Conference (2012)
- Tae, H.J, "A Numerical and Experimental Performance Study on Rudder with Wavy Configuration at High Angles of Attack", Master, Naval Architecture and Ocean Engineering, pp.2017