Computational Analysis of KCS Model with an Equalizing Duct
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In order to minimize carbon emissions and greenhouse gas, the Energy Efficiency Design Index (EEDI) has become a major factor to be considered in recent years in a ship’s design and operation phases. Energy-Saving Devices (ESDs) improve the EEDI of a vessel and make them environmentally friendly. In this research, the performance of an equalizing duct-type ESD installed upstream of a Korea Research Institute of Ships & Ocean Engineering (KRISO) Container Ship (KCS) model’s propeller was investigated by computational fluid dynamics (CFD). Open-source CFD libraries, OpenFOAM, were used for computational analysis of the KCS with and without the ESD to verify the performance improvement. The flow field near the stern region and propulsive coefficients were considered for comparison. The results showed a considerable improvement when an ESD was used on the model. Using different sizes of the duct, the performance of the ESD was also compared. It was observed that with an increased duct size, the propulsive performance was improved.
Abstract
In order to minimize carbon emissions and greenhouse gas, the Energy Efficiency Design Index (EEDI) has become a major factor to be considered in recent years in a ship’s design and operation phases. Energy-Saving Devices (ESDs) improve the EEDI of a vessel and make them environmentally friendly. In this research, the performance of an equalizing duct-type ESD installed upstream of a Korea Research Institute of Ships & Ocean Engineering (KRISO) Container Ship (KCS) model’s propeller was investigated by computational fluid dynamics (CFD). Open-source CFD libraries, OpenFOAM, were used for computational analysis of the KCS with and without the ESD to verify the performance improvement. The flow field near the stern region and propulsive coefficients were considered for comparison. The results showed a considerable improvement when an ESD was used on the model. Using different sizes of the duct, the performance of the ESD was also compared. It was observed that with an increased duct size, the propulsive performance was improved.
참고문헌 (17)
- Bart Schuiling, "Hydrodynamic working principles of Energy Saving Devices in ship propulsion systems", International Shipbuilding Progress, 63(3-4), pp.255~290 (2017), IOS Press[DOI]
- Birk, L., "Fundamentals of Ship Hydrodynamics" (2019), John Wiley & Sons, Ltd.
- Gaggero, S., "The KRISO Container Ship (KCS) Test Case: An Open-Source Overview", eedings of VI International Conference on Computational Methods in Marine Engineering (MARINE 2015), pp.735~749 (2015)
- J.S. Go, "Effects of a duct before a propeller on propulsion performance", Ocean Engineering, 136, pp.54~66 (2017), Elsevier BV[DOI]
- Heinrich Streckwall, "On the working principle of pre-swirl stators and on their application benefit and design targets", International Shipbuilding Progress, 63(3-4), pp.87~107 (2017), IOS Press[DOI]
- Proceedings of CFD Workshop Tokyo 2005, "Hino, T.", NMRI, ~ (2005)
- Kim, K. S., "Practical Application of CFD for Design of Energy Saving Devices Mounted on Ship stern", Proceedings of Twenty-third International Offshore and Polar Engineering Conference (2013)
- Kourosh Koushan, "Experimental and Numerical Study of Pre-Swirl Stators PSS", Journal of Marine Science and Engineering, 8(1), pp.47~ (2020), MDPI AG[DOI]
- P Król, "Pre-swirl energy saving device in marine application", Journal of Physics: Conference Series, 1101, pp.012015~ (2018), IOP Publishing[DOI]
- Larsson, L., "Tokyo 2015: A Workshop on CFD in Ship Hydrodynamics. 2" (2015), National Maritime Research Institute (NMRI)
- Menter, F. R., "Zonal Two Equations k-w Turbulence Models for Aerodynamics Flows", 23rd Fluid Dynamics, Plasmadynamics, and Lasers Conference (1993), American Institute of Aeronautics and Astronautics
- Mewis, F., "Mewis Duct - New Developments, Solutions, and Conclusions", Proceedings of Second International Symposium on Marine Propulsors (2011)
- 박선호, "Investigation on the wall function implementation for the prediction of ship resistance", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.33~46 (2013), 대한조선학회
- Seb, B., "Numerical Characterization of a Ship Propeller", Master, pp.2017
- Seonguk Seo, "Effect of wave periods on added resistance and motions of a ship in head sea simulations", Ocean Engineering, 137, pp.309~327 (2017), Elsevier BV[DOI]
- Shen, Z., "Ship Motions of KCS in Head Waves with Rotating Propeller Using Overset Grid Method", Proceedings of International Conference on Ocean, Offshore and Arctic Engineering (2014)
- Bram van Leer, "Towards the ultimate conservative difference scheme. V. A second-order sequel to Godunov's method", Journal of Computational Physics, 32(1), pp.101~136 (1979), Elsevier BV[DOI]