고규소 알루미늄 합금의 표면에 PEO 공정에 의하여 형성된 산화물 층의 부식 거동
Corrosion behavior of oxide layer formed on surface of high silicon aluminum alloy by PEO process
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Ceramic oxide layer was formed on the surface of high silicon aluminum alloy by using PEO (plasma electrolytic oxidation) process. The microstructure of the oxide layer was analyzed using scanning electron microscopy (SEM) and x-ray diffraction patterns (XRD). The high silicon aluminum alloy prior to PEO process consists of Al, Si and Al2Cu phases in XRD analysis, whereas Al2Cu phase selectively disappeared after PEO treatment. Considerable decrease of relative intensity in most of peaks in XRD results of the high silicon aluminum alloy treated by PEO process was observed. It may be attributed to the formation of amorphous phases after PEO treatment. The corrosion behavior of the high silicon aluminum alloy treated by PEO process was investigated using electrochemical impedance spectroscopy (EIS) and other electrochemical techniques (i.e., open circuit potential and polarization curve). Electroanalytical studies indicated that the high silicon aluminum alloy treated by PEO process shows greater corrosion resistance than that untreated by PEO process.
Abstract
Ceramic oxide layer was formed on the surface of high silicon aluminum alloy by using PEO (plasma electrolytic oxidation) process. The microstructure of the oxide layer was analyzed using scanning electron microscopy (SEM) and x-ray diffraction patterns (XRD). The high silicon aluminum alloy prior to PEO process consists of Al, Si and Al2Cu phases in XRD analysis, whereas Al2Cu phase selectively disappeared after PEO treatment. Considerable decrease of relative intensity in most of peaks in XRD results of the high silicon aluminum alloy treated by PEO process was observed. It may be attributed to the formation of amorphous phases after PEO treatment. The corrosion behavior of the high silicon aluminum alloy treated by PEO process was investigated using electrochemical impedance spectroscopy (EIS) and other electrochemical techniques (i.e., open circuit potential and polarization curve). Electroanalytical studies indicated that the high silicon aluminum alloy treated by PEO process shows greater corrosion resistance than that untreated by PEO process.
참고문헌 (22)
- F. Monfort, "Development of anodic coatings on aluminium under sparking conditions in silicate electrolyte", Corrosion Science, 49, pp.672~693 (2007)
- 박덕용, "Corrosion behaviors of plasma electrolytic oxidation (PEO) treated highsilicon aluminum alloys", 한국표면공학회지, 55(3), pp.144~155 (2022), 한국표면공학회
- E. Matykina, "Incorporation of zirconia into coatings formed by DC plasma electrolytic oxidation of aluminium in nanoparticle suspensions", Applied Surface Science, 255, pp.2830~2839 (2008)
- L. O. Snizhko, "Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions", Electrochimica Acta, 49, pp.2085~2095 (2004)
- E. V. Parfenov, "Impedance spectroscopy characterisation of PEO process and coatings on aluminium", Thin Solid Films, 516, pp.428~432 (2007)
- K. Nogita, "Determination of strontium segregation in modified hypoeutectic Al–Si alloy by micro x-ray fluorescence analysis", Scripta Materialia, 55, pp.787~790 (2006)
- K. B. Shah, "Aging temperature and abrasive wear behaviour of cast Al–(4%, 12%, 20%)Si–0.3% Mg alloys", Materials and Design, 28, pp.1968~1974 (2007)
- F. Xu, "The mechanism of PEO process on Al–Si alloys with the bulk primary silicon", Applied Surface Science, 255, pp.9531~9538 (2009)
- J. He, "Influence of silicon on growth process of plasma electrolytic oxidation coating on Al–Si alloy", Journal of Alloys and Compounds, 471, pp.395~399 (2009)
- W. Xue, "Analyses of microarc oxidation coatings formed on Si-containing cast aluminum alloy in silicate solution", ISIJ International, 42, pp.1273~1277 (2002)
- W. Xue, "Preparation of anti-corrosion films by microarc oxidation on an Al–Si alloy", Applied Surface Science, 253, pp.6118~6124 (2007)
- M. M. Krishtal, "Effect of structure of aluminum-silicon alloys on the process of formation and characteristics of oxide layer in microarc oxidizing", Metal Science and Heat Treatment, 46, pp.377~384 (2004)
- Y. J. Oh, "Effects of alloying elements on microstructure and protective properties of Al2O3 coatings formed on aluminum alloy substrates by plasma electrolysis", Surface and Coatings Technology, 204, pp.141~148 (2009)
- D. Y. Hwang, "Corrosion resistance of oxide layers formed on AZ91 Mg alloy in KMnO4 electrolyte by plasma electrolytic oxidation", Electrochimica Acta, 54, pp.5479~5485 (2009)
- L. Wang, "Silicon effects on formation of EPO oxide coatings on aluminum alloys", Thin Solid Films, 494, pp.211~218 (2006)
- 송의석, "6061 알루미늄 합금의 플라즈마 전해산화 피막의 표면기공율 및 부식특성에 미치는 Na3PO4 농도 및 NaAlO2 봉공처리의 영향", 한국표면공학회지, 52(3), pp.117~122 (2019), 한국표면공학회[DOI]
- Z. Yang, "The correlation between the Na2SiO39H2O concentrations and the characteristics of plasma electrolyte oxidation ceramic coatings", Ceramics International, 45, pp.19388~19394 (2019)
- C. J. Hu, "Preparation of ceramic coatings on an Al-Si alloy by the incorporation of ZrO2 particles in microarc oxidation", Surface and Coatings Technology, 258, pp.275~283 (2014)
- W. Liu, "Corrosion and wear behavior of PEO coatings on D16T aluminum alloy with different concentrations of graphene", Coatings, 10, pp.249~ (2020)
- W. Liu, "Effects of graphene on structure and corrosion resistance of plasma electrolyte oxidation coatings formed on D16T Al alloy", Applied Surface Science, 475, pp.645~659 (2019)
- R. Aliramezani, "Characterization and properties of PEO coatings on 7075 Al alloy grown in alkaline silicate electrolyte containing KMnO4 additive", Surface and Coatings Technology, 329, pp.250~261 (2017)
- Y. Zhang, "Corrosion behavior and structure of plasma electrolytic oxidation coated aluminum alloy", International Journal of Electrochemical Science, 12, pp.6788~6800 (2017)