알루미늄 7075 합금의 PEO 처리 기술 및 첨가제 영향 분석
Study of PEO Process for Al 7075 and Effect of additives
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, we developed plasma electrolytic oxidation (PEO) process for aluminum 7075 alloy to improve the corrosion and mechanical properties. The electrolyte consists of potassium hydroxide and sodium silicate. Additionally, sodium stannate was added into the electrolyte to investigate its effect on PEO film formation. Titanium was used as the counter electrode. Plasma generation voltage reduced from 300V to 150 V by adding 4 g/L of sodium stannate. The thin oxide films were observed by SEM(Scanning Electron Microscopy)/EDS (Energy Dispersive Spectroscopy) for quantitative and qualitative analyses. XRD (X-ray diffraction) and XRF (X-ray Fluorescences) analyses were also carried out to identify oxide layer on aluminum 7075 surface. Vicker’s hardness test was performed on the PEO-treated aluminum 7075 surface.
Abstract
In this study, we developed plasma electrolytic oxidation (PEO) process for aluminum 7075 alloy to improve the corrosion and mechanical properties. The electrolyte consists of potassium hydroxide and sodium silicate. Additionally, sodium stannate was added into the electrolyte to investigate its effect on PEO film formation. Titanium was used as the counter electrode. Plasma generation voltage reduced from 300V to 150 V by adding 4 g/L of sodium stannate. The thin oxide films were observed by SEM(Scanning Electron Microscopy)/EDS (Energy Dispersive Spectroscopy) for quantitative and qualitative analyses. XRD (X-ray diffraction) and XRF (X-ray Fluorescences) analyses were also carried out to identify oxide layer on aluminum 7075 surface. Vicker’s hardness test was performed on the PEO-treated aluminum 7075 surface.
참고문헌 (13)
- S. Forero Sotomonte, "Growth of PEO ceramic coatings on AA 2024-T3 aluminium alloy", Journal of Physis : Conference Series, 687 (2016)
- L. Wen, "Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy", Corrosion Science, 52, pp.2687~2696 (2010)
- Vahid Dehnavi, "Corrosion properties of plasma electrolytic oxidation coatings on an aluminium alloy – The effect of the PEO process stage", Materials Chemistry and Physics, 161, pp.49~58 (2015)
- 최인혜, "PEO 전류밀도 조건에 따른 알루미늄도금 강재상 산화코팅막의 특성", 한국표면공학회지, 50(5), pp.366~372 (2017), 한국표면공학회[DOI]
- 정우철, "플라즈마 전해산화법에 의해 형성된 알루미늄 합금의 양극산화피막 내마모 특성에 관한 연구", 한국표면공학회지, 51(6), pp.381~386 (2018), 한국표면공학회[DOI]
- B.L. Jiang, "Surf. Eng", pp.116~117 (2010), Woodhead Publishing
- Y. Zhang, "Corrosion behavior and structure of plasma electrolytic oxidation coated aluminium alloy", Int. J. Electrochem. Sci, 12, pp.6788~6800 (2017)
- P. Wang, "Ceramic coating formation on high Si containing Al alloy by PEO process", Surface Engineering, 32, pp.428~434 (2016)
- V. S. Egorkin, "Increasing thickness and protective properties of PEO-coatings on aluminum alloy", Surface and coatings Technology, 334, pp.29~42 (2018)
- 주재훈, "소수성 처리 방법에 따른 플라즈마 전해 산화 처리된 마그네슘 합금의 내식성", 한국표면공학회지, 52(2), pp.96~102 (2019), 한국표면공학회[DOI]
- A. Algahtani, "Erosion and Corrosion Resistance of Plasma Electrolytic Oxidized 6082 Aluminum Alloy Surface at Low and High Temperatures", J. Mater. Res. Technol, 8, pp.2699~2709 (2019)
- M. Mohedano, "PEO of pre-anodized Al–Si alloys:Corrosion properties and influence of sealings", Applied Surface Science, 346, pp.57~67 (2015)
- 김배연, "플라즈마 전해 산화 코팅에 있어서 인산염 전해액과 모재 성분 변화가 Al 산화피막 물성에 미치는 영향 I. PEO층의 물성", 한국세라믹학회지, 49(3), pp.241~246 (2012), 한국세라믹학회[DOI]