Coloring agent가 지르코니아 색조 재현성에 미치는 영향
Effect of coloring agent on the color of zirconia
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
목적: 이 연구의 목적은 coloring agent의 종류와 적용 횟수가 지르코니아의 색조에 미치는 영향을 알아보는 것이다. 재료 및 방법: 단일구조 지르코니아(15.7 mm × 15.7 mm ×2.0 mm)를 준비하여 완성된 시편은 11개 실험군 그룹으로 coloring agent의 종류와 적용 횟수에 따라 a1-a5와 w1-w5로 나누었다. 색조의 측정은 분광측색기를 이용하여 이루어졌다. Coloring agent를 적용시키지 않은 그룹을 대조군으로 설정하였다. 각 그룹의 색차의 정도(ΔE*ab)와 translucency parameter (TP)를 분석하였다. 측정치는 two-way ANOVA, multiple comparison Scheffe test, Pearson correlation와 linear regression analysis를 이용하여 분석하였다. 결과: Coloring agent의 적용횟수가 증가할수록 두가지 종류 모두에서 지르코니아의 명도는 감소하고 황색계열은 증가했다. Coloring agent는 지르코니아의 투명도에는 영향을 미치지 않았다. 각 그룹 간의 색조차이는 0.87 ΔEab에서 9.43 ΔEab 였다. 결론: Coloring agent의 종류와 적용 횟수는 지르코니아의 색조 차이에 영향을 미치지 않았다.
Abstract
Purpose: The aim of this study was to evaluate the effect of two types of coloring agents and the number of application on the color of zirconia. Materials and methods: Monolithic zirconia specimens (15.7 mm × 15.7 mm × 2.0 mm) (n = 33) was prepared and divided into 11 groups. Each experimental group was coded as a1-a5, w1-w5 according to the type of coloring agent and number of application. Specimens with no coloring agent applied were set as control group. The color difference of specimen was measured by using double-beam spectrophotometer, and calculated color difference (ΔE*ab), translucency parameter (TP). All data was analyzed with two-way ANOVA, multiple comparison Scheffe test, Pearson correlation and linear regression analysis. Results: As the number of application increased, values of CIE L* was decreased, but values of CIE b* was increased in both coloring agents. However, there was no significant difference on values of translucency parameter. The color difference range of each group was 0.87 ΔE*ab to 9.43 ΔE*ab. Conclusion: In this study, type of coloring agent and the number of application did not affect the color difference of zirconia.
참고문헌 (23)
- Spear FM, "A multidisciplinary approach to esthetic dentistry", Dent Clin North Am, 51, pp.487~505 (2007)
- Suarez MJ, "Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs", Int J Prosthodont, 17, pp.35~38 (2004)
- Beuer F, "Prospective study of zirconia-based restorations:3-year clinical results", Quintessence Int, 41, pp.631~637 (2010)
- 최유성, "In vitro evaluation of fracture strength of zirconia restoration veneered with various ceramic materials", The Journal of Advanced of Prosthodontics, 4(3), pp.162~169 (2012), 대한치과보철학회[DOI]
- Premwara Triwatana, "Clinical performance and failures of zirconia-based fixed partial dentures: a review literature", The Journal of Advanced of Prosthodontics, 4(2), pp.76~83 (2012), 대한치과보철학회[DOI]
- Marchack BW, "Complete and partial contour zirconia designs for crowns and fixed dental prostheses:a clinical report", J Prosthet Dent, 106, pp.145~152 (2011)
- Aboushelib MN, "Effect of zirconia type on its bond strength with different veneer ceramics", J Prosthodont, 17, pp.401~408 (2008)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- Commission Internationale de l’Eclairage, "Colorimetry, CIE 015. 3rd ed", CIE Central Bureau, ~ (2004)
- Johnston WM, "Translucency parameter of colorants for maxillofacial prostheses", Int J Prosthodont, 8, pp.79~86 (1995)
- Johnston WM, "Assessment of appearance match by visual observation and clinical colorimetry", J Dent Res, 68, pp.819~822 (1989)
- Douglas RD, "Color stability of new-generation indirect resins for prosthodontic application", J Prosthet Dent, 83, pp.166~170 (2000)
- Crispin BJ, "Relative color stability of ceramic stains subjected to glazing temperatures", J Prosthet Dent, 66, pp.20~23 (1991)
- O'Brien WJ, "A new, small-color-difference equation for dental shades", J Dent Res, 69, pp.1762~1764 (1990)
- Yu B, "Measurement of translucency of tooth enamel and dentin", Acta Odontol Scand, 67, pp.57~64 (2009)
- Kim IJ, "Effect of surface topography on the color of dental porcelain", J Mater Sci Mater Med, 14, pp.405~409 (2003)
- Lee YK, "Effects of colour measuring mode and light source on the colour of shade guides", J Oral Rehabil, 29, pp.1099~1107 (2002)
- Lee YK, "Layered color of all-ceramic core and veneer ceramics", J Prosthet Dent, 97, pp.279~286 (2007)
- Kim HK, "Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia", Dent Mater, 30, pp.229~237 (2014)
- Spyropoulou PE, "Translucency of shaded zirconia core material", J Prosthet Dent, 105, pp.304~307 (2011)
- Pecho OE, "Color and translucency of zirconia ceramics, human dentine and bovine dentine", J Dent, 40, pp.e34~e40 (2012)
- Shah K, "Effect of coloring with various metal oxides on the microstructure, color, and flexural strength of 3Y-TZP", J Biomed Mater Res B Appl Biomater, 87, pp.329~337 (2008)
- Beuer F, "In vitro performance of full-contour zirconia single crowns", Dent Mater, 28, pp.449~456 (2012)