The effect of coloring liquids on the translucency of zirconia framework
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
PURPOSE. Translucency of all-ceramic restorations is an important factor which affects the final appearance and esthetic outcome of the restoration. The aim of this study was to evaluate the effect of the shade of coloring liquid on the translucency of zirconia framework. MATERIALS AND METHODS. Thirty zirconium oxide core plate (15 × 12 × 0.5 mm) were divided into 6 groups of 5 plates each. Each group was classified according to the shade of coloring liquid based on Vita Classic Scale (A2, A3, B1, C2, and D2), and each sample was immersed in coloring liquid for 3 seconds as recommended by the manufacturer, except for the control group. Contrast ratio, as a translucency parameter, was calculated using a spectrophotometer and the data were analyzed with oneway analysis of variance (ANOVA) and Tukey’ honestly significant differences (HSD) tests (α=.05). RESULTS. Significant differences in translucency among the control and test groups, and the B1 shaded group and other shades was observed. There were no significant differences among A2, A3, C2, and D2 shaded groups. CONCLUSION. The translucency of the zirconium oxide cores was affected by the coloring procedure and significant differences in the translucency measurements were identified between specific shades.
Abstract
PURPOSE. Translucency of all-ceramic restorations is an important factor which affects the final appearance and esthetic outcome of the restoration. The aim of this study was to evaluate the effect of the shade of coloring liquid on the translucency of zirconia framework. MATERIALS AND METHODS. Thirty zirconium oxide core plate (15 × 12 × 0.5 mm) were divided into 6 groups of 5 plates each. Each group was classified according to the shade of coloring liquid based on Vita Classic Scale (A2, A3, B1, C2, and D2), and each sample was immersed in coloring liquid for 3 seconds as recommended by the manufacturer, except for the control group. Contrast ratio, as a translucency parameter, was calculated using a spectrophotometer and the data were analyzed with oneway analysis of variance (ANOVA) and Tukey’ honestly significant differences (HSD) tests (α=.05). RESULTS. Significant differences in translucency among the control and test groups, and the B1 shaded group and other shades was observed. There were no significant differences among A2, A3, C2, and D2 shaded groups. CONCLUSION. The translucency of the zirconium oxide cores was affected by the coloring procedure and significant differences in the translucency measurements were identified between specific shades.
참고문헌 (19)
- Joiner A, "Tooth colour: a review of the literature", J Dent, 32, pp.3~12 (2004)
- Dietschi D., "Layering concepts in anterior composite restorations", J Adhes Dent, 3, pp.71~80 (2001)
- Raptis NV, "Optical behavior of current ceramic systems", Int J Periodontics Restorative Dent, 26, pp.31~41 (2006)
- Kelly JR, "Ceramics in dentistry:historical roots and current perspectives", J Prosthet Dent, 75, pp.18~32 (1996)
- Sorensen JA, "A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic", Pract Periodontics Aesthet Dent, 11, pp.95~106 (1999)
- Giordano RA, "Dental ceramic restorative systems", Compend Contin Educ Dent, 17, pp.779~786 (1996)
- Holloway JA, "The effect of core translucency on the aesthetics of all-ceramic restorations", Pract Periodontics Aesthet Dent, 9, pp.567~574 (1997)
- Clarke FJ, "Measurement of color of human teeth", Proceedings of the First International Symposium on Ceramics, pp.441~490 (1983)
- Yu B, "Measurement of translucency of tooth enamel and dentin", Acta Odontol Scand, 67, pp.57~64 (2009)
- Spear F, "Which all-ceramic system is optimal for anterior esthetics", J Am Dent Assoc, 139, pp.19~24 (2008)
- Nakamura T, "Influence of abutment substrate and ceramic thickness on the colour of heat-pressed ceramic crowns", J Oral Rehabil, 29, pp.805~809 (2002)
- Brodbelt RH, "Translucency of dental porcelains", J Dent Res, 59, pp.70~75 (1980)
- Kingery WD, "Introduction to ceramics", pp.646~689 (1976), John Wiley and Sons
- Berns RS, "Principles of color technology", pp.8~9 (2000), John Wiley and Sons
- Mclean JW, "New dental ceramics and esthetics", J Esthet Dent, 7, pp.141~149 (1995)
- Binns D, "The chemical and physical properties of dental porcelain", Dental ceramics Proceedings of the first ınternational symposium on ceramics, pp.41~ (1983)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- Liu MC, "Human perception of dental porcelain translucency correlated to spectrophotometric measurements", J Prosthodont, 19, pp.187~193 (2010)
- Spyropoulou PE, "Translucency of shaded zirconia core material", J Prosthet Dent, 105, pp.304~307 (2011)