임산부용 니트 요가바지 비교 분석 - CLO 3D 가상착의 프로그램 활용 -
Comparative Analysis on Knitted Yoga Pants for Pregnant Women - Using CLO 3D Virtual Fitting Stimulation Program -
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This research theoretically contemplated on the definition of prenatal yoga, body shapes of pregnant women, characteristics of yoga pants, definition of 3D virtual fit program, and methods to use the program. Through preliminary investigation, 3 types of samples were selected among the yoga pants for pregnant women that sold in the market. Material and pattern analysis were performed on the 3 samples. By virtually fitting the clothes on the avatars which have the body shape of pregnant women and evaluating the results. The result of the research is as follows. First, according to the result, sample C showed the best stretchability in both wale direction and course direction. All samples showed an excellent recovery rate from elongation, and had flat knit, which provided excellent stretchability. Second, sample A, B, and C all had broader waistbands compared to the waistbands of regular yoga pants. Sample A and C used elastic band on the back of the waist to allow the textile to accommodate the enlargement of pregnant women’s abdominal circumference, and the back of the waistband in sample B was designed in a wrap form. Also, even though sample A has an unfold at the front center, there is a triangular gusset on the crotch area which helps the legs to move freely. Third, sample A had an extremely high clothing pressure; however, it did not show any wrinkles. Sample B did not show any clothing pressure around the waist and abdominal, which caused wrinkles on the hip. Overall, Sample C showed the most moderate level of clothing pressure, except for the side waist area where the clothing pressure was extremely high.
Abstract
This research theoretically contemplated on the definition of prenatal yoga, body shapes of pregnant women, characteristics of yoga pants, definition of 3D virtual fit program, and methods to use the program. Through preliminary investigation, 3 types of samples were selected among the yoga pants for pregnant women that sold in the market. Material and pattern analysis were performed on the 3 samples. By virtually fitting the clothes on the avatars which have the body shape of pregnant women and evaluating the results. The result of the research is as follows. First, according to the result, sample C showed the best stretchability in both wale direction and course direction. All samples showed an excellent recovery rate from elongation, and had flat knit, which provided excellent stretchability. Second, sample A, B, and C all had broader waistbands compared to the waistbands of regular yoga pants. Sample A and C used elastic band on the back of the waist to allow the textile to accommodate the enlargement of pregnant women’s abdominal circumference, and the back of the waistband in sample B was designed in a wrap form. Also, even though sample A has an unfold at the front center, there is a triangular gusset on the crotch area which helps the legs to move freely. Third, sample A had an extremely high clothing pressure; however, it did not show any wrinkles. Sample B did not show any clothing pressure around the waist and abdominal, which caused wrinkles on the hip. Overall, Sample C showed the most moderate level of clothing pressure, except for the side waist area where the clothing pressure was extremely high.
참고문헌 (26)
- 강효민, "체형변화 및 선호도에 의한 임부복 디자인 개발", 석사, 의상디자인, pp.2008
- 김도경, "3차원 가상 착의 시스템을 이용한 여자 청소년용 길 원형 맞음새 연구", Family and Environment Research, 54(3), pp.279~292 (2016), 대한가정학회
- 김민경, "3차원 가상착의 시스템의 Mass Customization 적용가능성을 위한 맞음새 비교 연구", 기초조형학연구, 16(6), pp.77~87 (2015), 한국기초조형학회
- 김선영, "슬랙스 맞음새의 정량적 평가 기준 설정", 박사, 의류학, pp.2009
- 김소영, "동적자세와 피부분절(dermatomes)을 이용한 기능성 밀착의복 제작 프로세스 개발", 박사, 의류학, pp.2008
- 김윤희, "유아의 체형연구 및 3D 아바타 가상착의를 활용한 길 원형 개발 : 만 3~5세 유아를 중심으로", 박사, pp.2019
- 나미향, "임산부의 슬랙스 패턴 설계를 위한 체형 연구 : 임신중기부터 산후 1개월의 체형을 중심으로", 한국생활과학회지, 9(1), pp.117~125 (2000)
- 박은진, "운동수행능력 향상을 위한 기능성 스포츠웨어의 필요성에 대한 고찰", 코칭능력개발지, 20(2), pp.40~51 (2018), 한국코칭능력개발원[DOI]
- 박정빈, "오토마티즘의 표현적 특징을 응용한 텍스타일디자인에 관한 연구 : CLO3D를 중심으로", 석사, 퓨전디자인학과 패션디자인전공, pp.2013
- 성옥진, "노년 비만남성의 셔츠원형 개발을 통한 실버 의류산업 활성화 기반 구축 - CLO 3D 가상착의 시스템 활용 -", 복식문화연구, 28(3), pp.299~312 (2020), 복식문화학회[DOI]
- 송명숙, "임산부 요가의 특정체위 수준이 분만소요시간에 미치는 영향", 운동과학, 24(4), pp.349~355 (2015), 한국운동생리학회[DOI]
- 윤사아, "실제착의와 3D 스캔을 이용한 가상착의의 프로그램별, 체형별, 맞음새별 외관 유사도 평가", 석사, pp.2015
- 이나영, "3D 가상의상 소프트웨어를 활용한 가족예복 디자인개발", 석사, pp.2020
- 이소원, "임신기간 중 요가 프로그램이 출산 후 산모의 신체적 회복 및 분만 만족도에 미치는 영향", 석사, pp.2016
- 임민정, "요가의 종류와 동작에 따른 현대 기능성 요가복 디자인 특성", 디지털디자인학연구, 14(4), pp.459~469 (2014), 한국디지털디자인학회
- 전성연, "3차원 가상착의 시스템을 활용한 청소년 후기 여성의 보디스 원형 개발", 박사, pp.2018
- 정연희, "3D 가상착의를 통한 모터사이클팬츠 패턴 개발", 한국생활과학회지, 25(2), pp.207~225 (2016), 한국생활과학회
- 정은영, "3D 테크놀로지를 이용한 체표면 변화 및 의복압 분석에 따른 밀착 하의 패턴 개발", 석사, pp.2018
- 정혜린, "8주간의 산전요가가 임신 3기 임산부의 신체적, 심리적 요인 및 임신 결과에 미치는 영향", 석사, pp.2017
- 지은선, "임산부 요가가 임부의 체중증가, 분만경험 및 출생체중에 미치는 영향", 여성건강간호학회지, 15(2), pp.121~129 (2009), 한국여성건강간호학회
- 차수정, "임산부의 체형 인식 유형에 대한 주관성 연구", 한국컴퓨터정보학회논문지, 24(12), pp.101~108 (2019), 한국컴퓨터정보학회[DOI]
- 장래인구특별추계: 2017∼2067년, "통계청", 사회통계국 인구동향과, ~ (2019)
- 한순영, "3D 체표면 분석 및 동적 평가를 활용한 요가슬랙스 프로토콜 연구", 박사, pp.2015
- Clare Collins RN, "Yoga : Intuition, Preventive Medicine, and Treatment", JOGNN, 27(5), pp.563~568 (1998)
- Umbach, K. H, "Optimization of the wear comfort by suitable fibre, yarn and textile construction", In 40th International Man-Made Fibres Congress (2001)
- "clo"[URL]
