동작 시 신축성 소재 팬츠의 가상착의 재현
Reproducibility of virtual pants fit applied with the stretchable fabric and movements
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The purpose of this study is to verify how similar the virtual fit pants are to the actual fit of stretchable pants. Data is produced using a virtual model to apply movements. The results show that in the upright position, the similarity between the appearance of the actual fit and the virtual fit is high. Results are 4.47, 4.13 and 4.33 out of 5 on the front, side, and back, respectively. The base line of the front and back, and the amount of allowance in each part were well reproduced by the model. The texture of the virtual fit was evaluated and found to be similar to the actual fabric. In terms of shape and number of wrinkles with the virtual fit pants, large wrinkles were better expressed than fine wrinkles. After applying movements to the virtual model, the front and side results were similar to the actual fit, but the back results were different. As a result of multiple comparisons, the greatest difference in similarity by movements is found in the center front line. The similarity difference was lower on the side than on the front. The only significant difference after applying movements is in the hip circumference margin. According to movements, the similarity of virtual fit is lower on the back than on the front and side, and the back also has the largest similarity differences to the movements type.
Abstract
The purpose of this study is to verify how similar the virtual fit pants are to the actual fit of stretchable pants. Data is produced using a virtual model to apply movements. The results show that in the upright position, the similarity between the appearance of the actual fit and the virtual fit is high. Results are 4.47, 4.13 and 4.33 out of 5 on the front, side, and back, respectively. The base line of the front and back, and the amount of allowance in each part were well reproduced by the model. The texture of the virtual fit was evaluated and found to be similar to the actual fabric. In terms of shape and number of wrinkles with the virtual fit pants, large wrinkles were better expressed than fine wrinkles. After applying movements to the virtual model, the front and side results were similar to the actual fit, but the back results were different. As a result of multiple comparisons, the greatest difference in similarity by movements is found in the center front line. The similarity difference was lower on the side than on the front. The only significant difference after applying movements is in the hip circumference margin. According to movements, the similarity of virtual fit is lower on the back than on the front and side, and the back also has the largest similarity differences to the movements type.
참고문헌 (20)
- Armstrong, H. J., "Patternmaking for fashion design" (2001), Norano
- 천탠이, "디지털 클로딩 기술 기반 가상착의 업사이클링 패션디자인", 복식문화연구, 29(3), pp.374~387 (2021), 복식문화학회[DOI]
- 최영림, "3차원 스캔과 가상 착의 기술의 평가와 활용에 관한 질적연구", 한국의류산업학회지, 11(3), pp.437~444 (2009), 한국의류산업학회
- 홍은희, "3차원 인체스캔형상을 재현한 3D 아바타 제작을 위한 가상착의 시스템의 활용성 검증 - CLO 3D 프로그램을 중심으로 -", 한국의상디자인학회지, 22(1), pp.1~13 (2020), 한국의상디자인학회[DOI]
- 전성연, "가상착의 시스템을 이용한 여고생의 보디스 원형 개발", 한국의류산업학회지, 21(2), pp.825~838 (2019), 한국의류산업학회[DOI]
- Ju, K. S., "Usage & education of the CLO 3D virtual clothing program in the development office & academic", Fashion Information and Technology, 13, pp.51~59 (2016)
- 김현아, "플레어 스커트의 실제착의와 가상착의 이미지 비교", 감성과학, 14(3), pp.385~394 (2011), 한국감성과학회
- 김민경, "3차원 가상착의 시스템의 Mass Customization 적용가능성을 위한 맞음새 비교 연구", 기초조형학연구, 16(6), pp.77~87 (2015), 한국기초조형학회
- 김소라, "디지털 기술의 융합을 통한 패션 디자인 개발에 관한 연구 -빅데이터와 3D 가상착의 프로그램을 중심으로-", 상품문화디자인학연구, (62), pp.285~297 (2020), 한국상품문화디자인학회
- (2018)[URL]
- The 6th size Korea 3D scan & measurement technology report, "Korean Agency for Technology and Standards", Government Printing Office, ~ (2010)
- The 7th size Korea 3D scan & measurement technology report, "Korean Agency for Technology and Standards", Government Printing Office, ~ (2015)
- The 8th size Korea 3D scan & measurement technology report, "Korean Agency for Technology and Standards", Government Printing Office, ~ (2021)
- 곽연신, "여성 재킷의 실제착의와 가상착의 비교를 통한 3D 가상착의 시스템 개선에 대한 연구", 문화기술의 융합, 2(3), pp.15~22 (2016), 국제문화기술진흥원[DOI]
- 이진숙, "3차원 가상착의와 실제착의를 통한 비만여성의 바지 맞음새 비교", 패션 비즈니스, 17(2), pp.33~45 (2013), 한국패션비즈니스학회[DOI]
- 이나연, "3D 가상의상 소프트웨어를 활용한 가족예복 디자인 개발", 패션 비즈니스, 23(3), pp.35~50 (2019), 한국패션비즈니스학회[DOI]
- 이수연, "3차원 가상착의 시스템의 맞춤복 시장 적용가능성에 관한 연구 - 중년여성을 대상으로 -", 패션 비즈니스, 14(4), pp.161~173 (2010), 한국패션비즈니스학회
- Lim, J. Y., (2014), Kyohakyongusa
- Won, Y. H., "A comparative study on the similarity between virtual and actual clothing movements according to the pants silhouette", master, pp.2021
- 원윤혜, "팬츠 실루엣에 따른 실제착의와 가상착의의 유사도 비교 연구", 한국의류산업학회지, 23(6), pp.826~835 (2021), 한국의류산업학회