본문 바로가기
KERD
논문KCI 등재

The effect of environment on the physical properties of core materials

박상진|최경규|황유숙
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2005.03|Restorative Dentistry and Endodontics|제30권 제2호|pp. 86-94

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

굴곡강도기계적 성질flexural strengthhardness경도지대치 재료굴곡탄성계수mechanical propertiecore materials
주제분류치의학

초록

비금속 지대치 재료의 구강 내 환경변화에 따른 물리적 성질을 구명하기 위하여 4종의 지대치 재료를 다양한 환경에 보관한 후 굴곡강도 및 표면경도의 변화를 관찰하여 조건에 따른 영향을 구명하고자 이 연구를 시행하였다. Bisfil Core, Core Max, Fuji IX GP, Miracle Mix를 사용하여 굴곡강도 측정을 위한 시편을 제작한 후 최대하중을 측정하여 굴곡강도와 굴곡탄성계수를 계산하였다. 표면경도 측정을 위하여 아크릴릭 레진블럭에 상기 4종의 재료를 충전하여 중합시킨 후 순차 연마하여 경도측정을 위한 시편을 제작하고 Vickers hardness를 계산하였다. 1. 굴곡강도는 Core Max에서 가장 높고 Miracle Mix에서 가장 낮았다. 2. 37℃ 증류수에 24시간 보관한 군에서 Bisfil Core가 경도가 가장 높았다. 3. 30일 저장군에서는 Core Max가 경도가 가장 높았다. 4. 모든 군에서 Miracle Mix가 가장 낮은 경도를 나타냈다. 5. 2% NaF용액과 0.02N lactic acid용액은 증류수보다 지대치 재료의 굴곡강도와 표면경도를 저하시켰다.

Abstract

The purpose of this study was to measure the flexural strength and hardness of four core materials in 4 different medias and to evaluate the relationship between the physical properties. For the flexural strength, the specimens were prepared from each of the following materials: Bisfil Core, Core Max, Fuji IX GP, Miracle Mix and randomly divided into four groups and stored at 37 degree C in the following medias: distilled water for 24 hours (DW/1), distilled water for 30 days (DW/30). 2% NaF for 30 days (NF/30), 0.02N lactic acid for 30 days (LA/30). After storage, the specimens were subjected to flexural strength testing and calculated to flexural modulus. For hardness testing, specimens were prepared from four materials and storaged in the uniform way. After storage, the specimens were subjected to Vicker's hardness testing. 1. The flexural strength of Core Max were the highest, and the flexural strength of Miracle Mix were the lowest. 2. The hardness of Bisfil Core were the highest. 3. The hardness of Core Max were the highest. 4. The hardness of Miracle Mix were the lowest. 5. 2% NaF and 0.02N lactic acid negatively affected the flexural strength and hardness of four core materials.

참고문헌 (30)

  1. "Wilson NHF. Mechanical properties of Direct core materials. Dent mater 15", 15, pp.158~165 (1999)
  2. "Meyer J-M. Effect of Water on the physical properties of resin-modified glass ionomer cements. Dent Mater 15", 15, pp.71~78 (1999)
  3. "Comparative study of the physical properties of Core materials. Int J Periodontics Restorative Dent 22", 22(4), pp.355~363 (2002)
  4. "Chay PL. Mechanical properties of two restorative Reinforced glass-ionomer cements. J Oral Rehabil 29", 29, pp.682~688 (2002)
  5. "Onen A. Fluoride release and uptake characteristics of aesthetic restorative materials. J Oral Rehabil 29", 29(8), pp.791~798 (2002)
  6. "Kent BE. A new translucent cement for dentistry. The glass Ionomer cement. Br Dent J 150", pp.132~133 (1972)
  7. "Knobloch L. Strength characteristics of glass-ionomer cements. Oper Dent 17", pp.170~174 (1992)
  8. "Bleiholder RF. Physical properties of stainless-steel and Silver- reinforced glass-ionomer cements. J Dent Res 70", pp.1358~1361 (1991)
  9. "a Three-year community field trial in Thailand-Survival of one-surface Restorations in the permanent dentition. Journal of Public Health Dentistry 56", pp.141~145 (1991)
  10. "Goldstein GR. A comparison of the Diametral tensile strength and the compressive Strength of two new core materials to a silver alloy-reinforced Glass-ionomer material. J Prosthet Dent 72", pp.481~485 (1994)
  11. "Deutsch AS. Comparison of the flexural strength of six reinforced restorative materials. Gen Dent 49", 49(5), pp.484~488 (2001)
  12. "Walti C. Influence of oral fluid on composite resins and glass Ionomer cement. J Prosthet Dent 52" (1984)
  13. "Zeng KY. Chemical degradation of composite restoratives. J Oral Rehabil 28", 28(11), pp.1015~1021 (2001)
  14. "Limanowska-Shaw H. Storage of polyacid-modified resin composites in lactic acid solution. Dent Mater 15", 15, pp.413~416 (1999)
  15. "Aono M. The effect of glaze on restorative glass- ionomer cements evaluation of environmental durability in lactic acid solution. J Oral Rehabil 22", 22(9), pp.685~689 (1995)
  16. "Yaffee and Zalkind. The effect of topical application of fluorides on composite resin restorations. J prosthet Dent 45", pp.59~62 (1980)
  17. "Verbeeck RM. Surface roughening of glass ionomer cements by neutral NaF solutions. Biomaterials 24", 24(11), pp.1995~2000 (2003)
  18. "Condon J. R. Ferracane J. L. The effects of Adhesive Thickness on Polymerization contraction stress of Composite. J. Dent Res 79", pp.812~817 (2000)
  19. "Kedrowski BL. Long-term mechanical properties of glass iomers. Eur J Oral Sci 104", 104, pp.600~604 (1996)
  20. "Onose H. Effect of surface coatings on flexural properties of glass iononomers. Dent Mater 10", pp.78~82 (1994)
  21. "Kula TJ. Effects of daily topical fluoride gels on resin composite degradation and wear. Dent Mater 13", 13(5), pp.305~311 (1997)
  22. "Cleek GW. A new series of X-ray-opaque reinforcing fillers for composite materials. J Dent Res 51", pp.177~182 (1972)
  23. "Williams JA. Effect of monovalent Ions in glass ionomer cements on their ineraction with sodium fluoride solution. Biomaterials 21", 21(1), pp.97~102 (2000)
  24. "Williams JA. Effects of adding sodium and fluoride ions to glass ionomer on its interactions with sodium fluoride solution. Biomaterials 21", 21(4), pp.377~383 (2000)
  25. "Rodrigues AL Jr. Effect of storage media upon the surface micromorphology of resin-based restorative materials. J Oral Rehabil 29", 29(9), pp.864~871 (2002)
  26. "Tech SH. Environmental damage and occlusal contact area wear of composite restoratives. J Oral Rehabil 29", 29(1), pp.87~97 (2002)
  27. "Wu W. Chemical softening and wear of dental composites. J Dent Res 64", pp.1326~1331 (1985)
  28. "Teoh SH. Comparative wear resistance of reinforced glass ionomer restorative materials. Oper Dent 26", 26(4), pp.343~348 (2001)
  29. "Sarkar NK. Metal-matrix interface in reinforced glass ionomers. Dent Mater 15", 15(6), pp.421~425 (1999)
  30. "Sarkar NK. Metal-matrix interface in reinforced glass ionomers. Dent Mater 15", 15(6), pp.421~425 (1999)

관련 논문AI추천

수종 코어용 복합레진 수복재의 물성에 관한 연구신동훈, 신수일대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제2호수분 흡수가 여러 레진계 치아고정 재료의 굴곡강도와 탄성계수에 미치는 영향김수연, 김진우, 박배영, 박세희, 조경모대한턱관절교합학회 · 구강회복응용과학지2018 · 제34권 제2호수분이 지르코니아 수복물 전용 레진시멘트의 파괴인성에 미치는 영향에 관한 연구구본욱, 김성훈, 김희경, 여인성, 이재봉, 하승룡, 한중석대한치과보철학회 · 대한치과보철학회지2014 · 제52권 제4호두께에 따른 이중 중합형 복합레진의 중합권태엽, 김성교, 김영경, 김윤주, 진명욱대한치과보존학회 · Restorative Dentistry and Endodontics2008 · 제33권 제3호치과용 수복재의 수분흡수도와 압축강도의 변화에 관한 연구장우혁, 최영철대한소아치과학회 · 대한소아치과학회지2003 · 제30권 제1호Effect of solution temperature on the mechanical properties of dual-cure resin cements강은숙, 권용훈, 윤미정, 전영찬, 정창모, 허중보대한치과보철학회 · The Journal of Advanced of Prosthodontics2013 · 제5권 제2호

이 간행물의 다른 논문 (7건)

Obturation efficiency of non-standardized gutta-percha cone in curved root canals prepared with 0.06 taper nickel-titanium instruments김성교, 이은아pp. 79-85다양한 치근단공 크기와 근관단면의 형태를 가지는 치아에서 taper의 정도가 미세누출에 미치는 영향유미경, 이세준, 이광원, 이경하, 김정희pp. 95-101Endo-dontic Flare-ups Incidence and Related Factors박상혁, 정혜영, 최기운pp. 102-111SEM과 3차원 재구성법을 이용한 수복면의 위치와 와동 크기에 따른 미세누출도 분석신동훈, 양인서pp. 112-120치아염소산나트륨 처리와 멸균법이 근관 치료용 파일의 부식에 미치는 영향에 관한 연구이영규, 손호현, 김미리, 양원경, 라윤식pp. 121-127
원문 보기